Embedded Files
TEST 1: Compactability
TEST 1: Compactability
Purpose: The visor must properly fit well inside any car by possessing the proper measurements securing the device to adjust for any driver effectively.
Pass Criteria: The team will place the visor inside a vehicle by placing it against the vehicle's existing visor for this test, by allowing an everyday driver to enter the vehicle. Moreover, the visor must possess similar measurements of 7 inches horizontally and 2.6 inches downward.
Materials: To test we will need the visor and a vehicle.
Initial Conditions: An existing visor within the drivers side of the car all other parts will be connected. Car must never be turned on.
Safety Concerns: A precaution the existing device could fall and hurt tester. Closed footwear and proper dress code.
Test Termination: This test will be terminated after device proper meets the existing measurements and adjusted fit against existing car visor.
Stepwise Procedure:
Materials have been verified
Initial conditions verified
Team members are notified and aware of safety precautions
Device will be taken into vehicle
Device will be placed and clipped against vehicle's existing visor
Device will be compared to existing visor based on proper measurements when extended
Test 2: INstallation and Accessability
Test 2: INstallation and Accessability
Purpose: Device can not be more than an inch thick in order and must lay flat against the cars existing visor and not obstruct vision. By configuring with the cars existing the visor can easily be applied and removed.
Pass Criteria: Once inside the car the team ensure that the device can easily connect to the car's existing visor by short step process of clips in a range of under ten seconds. Maneuvering should be easy in opening or when the visor is not in use it should easily go up without distraction and lay flat succeeding five sets of each action.
Materials: Vehicle and device.
Initial Conditions: An existing visor within the drivers side of the car all other parts will be connected. Car must never be turned on.
Safety Concerns: A precaution the existing device could fall and hurt tester. Closed footwear and proper dress code.
Test Termination: Test will be terminated the moment the device can easily be installed in a short step process of less than 10 seconds another tester will be within the vehicle to record time. The device can easily be maneuvered up and down no matter the times it is used after a set of 5.
Stepwise Procedure:
Materials have been verified
Initial conditions verified
Team members are notified and aware of safety precautions
Device will be taken into vehicle
A timer will run the moment the tester sets the device to connect with the existing car visor, trial will run five times.
Once the device is secured within the car, the tester will ensure that the device can easily open and close when the action is implemented. The test will run once the device has succeeded in opening and closing five times each and managed to stay well secured.
Test 3: Durablity and safety
Test 3: Durablity and safety
Purpose: Must be shatterproof in the event of a crash. A well-made and high-quality set of clips that connect directly to the visor ensures proper durability and is sturdy so it doesn’t fall off when you drive.
Pass Criteria: The device must perfectly attach to the existing car visor and be safely secured and stable after a period of ten minutes without falling and not damaging the device or risking the tester.
Materials: Vehicle and device.
Initial Conditions: An existing visor within the drivers side of the car all other parts will be connected. Car must never be turned on.
Safety Concerns: A precaution the existing device could fall and hurt tester. Closed footwear and proper dress code.
Test Termination: The team will allow a tester to enter the vehicle and be able to securely place the device against the existing car visor and once inside another tester will time that the visor stays secure and within the time the device could fall or risk the material or tester.
Stepwise Procedure:
Materials have been verified
Initial conditions verified
Team members are notified and aware of safety precautions
Device will be taken into vehicle
Device should be secured and free standing
A team member will time that device can stay secured and safe after a time period of ten minutes.
Team member will notice whether device does or does not get damage or harm tester.
Test 4: Versitility
Test 4: Versitility
Purpose: The device must combat glare at any time of day and effectively adapt to any glare presented circumstances that the driver is within.
Pass Criteria: The device should effectively combat glare from presented light sources that presume during broad daylight and even in the dark - night.
Materials: Vehicle, device, and a powerful light source.
Initial Conditions: An existing visor within the drivers side of the car all other parts will be connected. Car must never be turned on.
Safety Concerns: A precaution the existing device could fall and hurt tester. Closed footwear and proper dress code. Hazard: Being exposed by harmful light do not stare at light sources too close or for too long. Hazard: be cautious of wiring and cables from light sources be aware of surroundings.
Test Termination: Test will be terminated once the device can effectively combat glare from a light source during the day and be just as efficient by combating glare during the night from a light source.
Stepwise Procedure:
Materials have been verified
Initial conditions verified
Team members are notified and aware of safety precautions
Device will be taken into vehicle
Connect device into the car.
Connect light source ten feet from car
First test will run in daylight to effectively see glare can be diminished
Next test will be run close to sunset to see glare be diminished
Last test will run in the night glare to test that glare can be easily diminished through device
Page updated
Report abuse