Publications
Marco P. Schoen 

PUBLICATIONS:

New Textbook:

Introduction to Intelligent Systems, Control, and Machine Learning using MATLAB

Cambridge University Press

www.cambridge.org/highereducation/isbn/9781316518250

DOI: 10.1017/9781009004992

© Marco P. Schoen 2024

Book Chapters:

2.       Marco P. Schoen and Arya Ebrahimpour, 'Overview of Electroactive Polymers,' Invited Book Chapter, 2013.

3.       Arya Ebrahimpour and Marco P. Schoen,' Externally Bonded FRP Composite and Viscoelastic Materials for Mitigating Vibration of Floor Systems,' Invited Book Chapter, 2013.

4.       Marco P. Schoen, Ajay Mahajan and Vidya Nandikolla, 'Diabetic Foot,' Invited Book Chapter, January 2010 in Distributed Diagnosis and Home Healthcare, by American Scientific Press.

5.       Unnikrishnan, Pan, Schoen, Mahajan, Don and Chu, "Input Design for Systems Under Identification as Applied To Ultrasonic Transducers," Invited Book Chapter, in Dynamical Systems: Discontinuity, Stochasticity and Time-Delay, Editor: Albert C.J. Luo, Springer, March 2010

6.       Ebrahimpour, A., and Schoen, M. P., 'Smart Materials in Civil Structures,' Invited Book Chapter, 'Focus on Material Science Research' Editor Dita V. Rosse, Nova Science Publishers, Inc., Hauppauge, NY, 2007.

Peer Reviewed Archival Journal Papers:

7.      Anish Thapa, Jichao Li, Marco P. Schoen, “Spike Stall precursor Detection in a Single-Stage Axial Compressor: A Data-Driven Dynamic Modeling Approach, Machines, 13(4), 2025, https://doi.org/10.3390/machines13040338

8.      Kellie N. Wislon, Golam Gause Jaman, Anish Thapa, Amirthavarshini Vivekandanda, Mitchell Lowe, Zachary Grima, and Marco P. Schoen, “A Review of Stall Detection in Subsonic Axial Compressors,” Machines, 2025, 13, 13, https://doi.org/10.3390/machines13010013

9.      Mashrur Ertija Shejan, Sharif Md Yousuf Bhuiyan, Marco P. Schoen, and Rajib Mahamud, “Assessment of Machine Learning Techniques for Simulating Reacting Flow: From Plasma-Assisted Ignition to Turbulent Flame Propagation, Energies 2024, 17, 4887, https://doi.org/10.3390/en17194887 

10. Golam Gause Jaman and Marco P. Schoen, “Convolutional Neural Networks for Time Series Data Processing Applicable to sEMG Controlled Hand Prosthesis,” Technische Mechanik, Vol. 44(1), 2024. https://doi.org/10.24352/UB.OVGU-2024-053.

11.    Yuyang Deng, Jichao Li, Jingyuang Liu, Feng Peng, Hongwu Zhang, Marco P. Schoen, “Stall prediction model based on deep learning network in axial flow compressor,” Chinese Journal of Aeronautics, https://doi.org/10.1016/j.cja.2024.11.034, December 6, 2024.

12.    Asib Mahmud, Omid Heidari, Marco P. Schoen, “sEMG based Real-Time Motion Classification using Virtual Reality and Artificial Neural Networks,” Journal of Electrical Engineering and Automation, Vol. 4(4), p.: 241 – 256, (doi:10.36548/jeea.2022.4.003), 2022.

13.    Asif A. Ahmed, Marco P. Schoen, and Ken W. Bosworth, “System Identification using Nuclear Norm and Tabu Search Optimization,” Special issue of IOP Conference Series: Materials Science and Engineering, vol. 297, doi:10.1088/1757, 2018.

14. Marco P. Schoen, Ji-Chao Lee, "Application of System Identification for Modeling the Dynamic Behavior of Axial Flow Compressor Dynamics,” International Journal of Rotating Machinery Volume 2017, Article ID 7529716, 14 pages, 2017.

15. Sterbentz D., Prasai S., Hofle M., Walters T., Lin F., Li J., Bosworth K., and Schoen M. P., “System Identification within the Tip Region of an Axial Compressor Blade Passage,” Journal of Thermal Science, Vol. 25(2), pp 109 – 116, 2016.

16. Potluri, Chandrasekhar; Anugolu, Madhavi; Naidu, D Subbaram; Schoen, Marco P. ; Chiu, Steve, “Real-time Embedded Frame Work for sEMG Skeletal Muscle Force Estimation and LQG Control Algorithms for Smart Upper Extremity Prostheses,” Journal Engineering Applications of Artificial Intelligence, Vol. 46, Part A, pp. 67 – 81, 2015.

17.    Chandrasekhar Potluri, Madhavi Anugolu, Marco P. Schoen, D. Subbaram Naidu, Alex Urfer, Steve Chiu, “Hybrid Fusion of Linear, Non-Linear and Spectral Models for the Dynamic Modeling of sEMG and Skeletal Muscle Force: An Application to Upper Extremity Amputation,” Elsvier: Computers in Biology and Medicine, vol. 43, pp. 1815 - 1826, 2013.

18.    Anish Sebastian, Parmod Kumar, Marco P. Schoen, “Modeling surface electromyogram dynamics using Hammerstein-Wiener models with comparison of IIR and spatial filtering techniques,” International Journal of Circuits, Systems and Signal Processing, Vol. 5(5), pp. 545 – 556, 2011.

19.    Anish Sebastian, Parmod Kumar, Marco P. Schoen, “Spatial filter masks optimization using genetic algorithm and modeling dynamic behavior of sEMG and finger force signals,” International Journal of Circuits, Systems and Signal Processing Vol. 5(6), pp. 597 – 608, 2011.

20.    Thomas W. Walters, Marco P. Schoen, D. Subbaram Naidu, Charles Dickerson, and Ben C. Perrenoud, “Quantification of Stress History in Type 304L Stainless Steel using Positron Annihilation Spectroscopy,” Journal of Materials Characterization Vol. 62(4), pp. 398–401, April 2011

21.    Cheng-Hung Chen, D. Subbaram Naidu, Marco P. Schoen, “Adaptive Control for a Five-Fingered Prosthetic Hand with Unknown Mass and Inertia,” WSEAS Transactions on Systems, Issue 5, Volume 10, May 2011, pp.: 148-161

22.    J. Rafiee, M.A. Rafiee, N. Prause, and M. P. Schoen, “Wavelet basis functions in biomedical signal processing,” International Journal of Expert Systems with Applications, Vol. 38(5) pp. 6190-6201, May 2011.

23.    J. Rafiee, M.A. Rafiee, F. Yavari, and M. P. Schoen, “Feature extraction of forearm EMG signals for prosthetics,” International Journal of Expert Systems with Applications, Vol. 38(4) pp. 4058-4067, April 2011.

24.    Marco P. Schoen, Jørgen Hals, and Torgeir Moan, “Wave Prediction and Robust Control of Heaving Wave Energy Devices for Irregular Waves,” IEEE Transaction of Energy Conversion, Vol. 26(2), pp. 627-638, June 2011.

25.    Barathram Ramkumar, Marco P. Schoen, and Feng Lin, “Hybrid Enhanced Continuous Tabu Search and Genetic Algorithm for Parameter Estimation in colored Noise Environments,” the International Journal of Expert Systems with Applications, Vol. 38, pp. 3909-3917, April 2011.

26.    Parmod Kumar, Chandrasekhar Potluri, Anish Sebastian, Steve Chiu, Alex Urfer, D. Subbaram Naidu, Marco P. Schoen, “Adaptive Multi Sensor Based Nonlinear Identification of Skeletal Muscle Force,” WSEAS Transactions on Systems, Vol. 10(9), pp. 1050-1062, October 2010.

27.    Feng Lin and Marco P. Schoen, “Acoustic/Structural Interaction and Optimal Design of Synthetic Jet Actuators,” Journal of Vibration and Control, Vol. 16(9), pp. 1393-1414, 2010.

28.    Chien-Hsun Kuo, Yuan-Min Cheng, Shiuh-Ming Chang, Marco P. Schoen, “Observer/Kalman Filter Identification (OKID) and LQG Control of Cavity Noise Reduction,” Journal of Professional Engineers, Vol. 2, No. 3, pp. 7 – 13, 2009.

29. C. Sato, R.G. Martinez, M. Shields, A. Perez, and Marco P. Schoen, “Behavior of Microbial Fuel Cell in a Startup Phase,” International Journal of Environment and Waste Management, Vol. 1(1), pp. 39-51, 2009.

30. Marco P. Schoen, Randy C. Hoover, Sinchai Chinvorarat, Gerhard M. Schoen, “System Identification and Robust Controller Design using Genetic Algorithms for Flexible Space Structures,” Journal of Dynamic Systems, Measurement, and Control, ASME, Vol. 131(3), May 2009.

31. Marco P. Schoen, “Application of Genetic Algorithms to Observer Kalman Filter Identification,” Journal of Vibration and Control, Vol.14 (7), 2008, pp.971 - 997.

32. James C. Lai, Marco P. Schoen, Alba Perez Gracia, D. Subbaram Naidu, Solomon W. Leung,” Prosthetic devices: challenges and implications of robotic implants and biological interfaces,” Journal Proceedings of the Institute of Mechanical Engineers, Part H, Journal of Engineering in Medicine, Vol. 221, Part H, 2007, pp.173 - 183.

33. Marco P. Schoen, “Dynamic Compensation of Smart Sensors” IEEE Transaction of Instrumentation and Measurement, Vol. 56 (5), October 2007, pp. 1991-2001.

34. Paladugu, Lalitha, Ebenezer Seisie-Amoasi, Marco P. Schoen, and Brian G. Williams, “Intelligent Star Pattern Recognition for Attitude Determination:  The ‘Lost in Space’ Problem,” AIAA Journal of Aerospace Computing, Information, and Communication, Vol. 3, November 2006, pp. 538-49.

35. Carrie Hahn, Ajay Mahajan, Tsuchin Chu, Marco P. Schoen, “A Lumped Parameter Model to Investigate the Effect of Plantar Pressure on Arterial Blood Flow in the Diabetic Foot,” Journal of Medical Engineering and Technology, Vol. 221 Part H, 2006, pp.677 - 686.

36.    Lucheng Ji, Feng Lin, Marco P. Schoen, "Numerical parametric Studies of Active Control of Separation from a Hump Model with Steady Suction and Injection," J. of Aerospace Power (in Chinese, abstract in English) Vol. 27, No. 1, Jan 2006, pp. 45-18.

37. Brijesh C. Lavu, Marco P. Schoen, and Ajay Mahajan, “Adaptive intelligent control of ionic polymer metal composites (IPMC),” Journal of Smart Materials and Structures, Vol. 14, pp: 466 – 474, 2005.

38.    Lucheng Ji, Feng Lin, and Marco P. Schoen, 2004, "Numerical Investigations about Active Flow Control over Hump Flow,” Journal Engineering Thermophysics, (Chinese) 2004.

39.    Feng Lin, Marco P. Schoen, U. A. Korde, "Numerical Investigation with Rub-related Vibrations in Rotating Machinery," Journal of Vibration and Control, Vol. 7, pp.: 833-848, 2001.

40. Chien Hsun Kuo, Marco P. Schoen, Sinchai Chinvorat, and Jen-Kuan Huang, “Closed-Loop System Identification by Residual Whitening,” Journal of Guidance, Control, and Dynamics, Vol. 23, 2000, pp.: 406-411.

41. Schoen M.P. and Jefferis III R.P., “Modeling and Simulation of a Freeze Drying Process,” International Journal of Modeling and Simulation, Vol. 20, (3), 2000, pp.: 255-263.

42. Jen-Kuang Huang, Hyun Chang Lee, Marco P. Schoen, Hsiao M. -H., “State-Space System Identification from Closed-Loop Frequency Response Data,” Journal of Guidance, Control, and Dynamics, Vol. 19, No. 6, 1996, pp.: 1378-1380.

43. Schoen M.P., Braxton B.K., Gatlin L.A., and Jefferis III, R.P., “A Simulation Model for the Primary Drying Phase of the Freeze-Drying Cycle,” International Journal of Pharmaceutics, Vol. 114, 1995, pp.: 159-170.

Discussion Journal Paper:

 44.    Marco P. Schoen, Discussion paper on 'Variance properties of a two-step ARX estimation procedure,' by F. Tjarnstrom and L. Ljung, European Journal of Control, Vol. 9, pp.: 431-432, 2003. 

Book Reviews:

45.    Marco P. Schoen, Robust Control Systems with Genetic Algorithms by Mo Jamshidi, Leanro dos Santos Ceilho, Renato A. Krohling, and Peter J. Fleming, CRC press, Boca Raton, FL, 2002, 210pp, International Journal of Robust and Nonlinear Control, RNC 989, Vol. 15, p. 335-337, 2005.

46.    Marco P. Schoen, Intelligent Optimization Techniques, Genetic Algorithms, Tabu Search, Simulated Annealing, and Neural Networks, D. T. Pham and D. Karaboga, Springer, London, 2000, 302 pp., International Journal of Robust and Nonlinear Control, RNC 986, Vol. 15, p. 287-289, 2005.

47.    Marco P. Schoen, Identification and Control of Mechanical Systems, Jer-Nen Juang and Minh Q. Phan, Cambridge University Press, Cambridge, UK, International Journal of Robust and Nonlinear Control, Vol. 13, 8, pp.: 785-787, July, 2003.

48.    Marco P. Schoen, From Plant Data to Process Control-Ideas for Process Identification and PID Design, Liuping Wang and William R. Cluett, Taylor & Francis Group, New York, NY, International Journal of Robust and Nonlinear Control, Vol. 13, 10, pp.: 1013-1015, August 2003. 

Peer Reviewed Archival Conferences Proceedings:

49. Atulan Gupta, Marco P. Schoen, “Analysis of Simulated Autonomous Wheelchair Driving using GA-PID and RL based Controllers,” ,” Intermountain Engineering Technology and Computing Conference (IEEE), May. 2025, Utah, USA.

50. Yuyang Deng, Jichao Li, Jingyuang Liu, Feng Peng, Hongwu Zhang, Marco P. Schoen, “Stall prediction model based on deep learning network in axial flow compressor,” Proceedings of ASME Turbo Expo 2024, June 24-28, London, United Kingdom.

51. Sharif Md Yousuf Bhuiyan, Tanzim Mostafa, Marco P. Schoen, Rajib Mahamud, “Assessment of machine learning approaches for the predictive model of plasma-assisted ignition kernel growth,” Proceedings of the ASME 2024 International Mechanical Engineering Congress and Exposition, IMECE 2024, November 17-21, 2024, Portland OR, USA.

52. Golam Gause Jaman, Marco P. Schoen, Jichao Li, “Spike Stall Precursor Detection in Axial Compressor System using GNN-RNN Hybrid Architecture,” International Conference on Electrics and Computer (INTCEC 2024) June 11-13 2024, Chicago, USA.

53. Anish Thapa, Marco P. Schoen, Automatic Regulation of Airspeed and Altitude of Aircraft using LQR,” Intermountain Engineering Technology and Computing Conference (IEEE), May. 2024, Utah, USA.

54. Nusrat Farheen, Golam Gause Jaman, and Marco P. Schoen, “Model-Based Reinforcement Learning with System Identification and Fuzzy Reward,” Intermountain Engineering Technology and Computing Conference (IEEE), May. 2024, Utah, USA.

55. Jaden Palmer, Kayson Oakey, Nancy Devine, and Marco P. Schoen, “Utilizing Augmented Reality for Upper-Extremity Prosthesis Dimensioning,” Intermountain Engineering Technology and Computing Conference (IEEE), May. 2024, Utah, USA.

56. Antora Dev, Kanan Roy Chowdhury, and Marco P. Schoen, “Q-Learning based Control for Swing-up and Balancing of Inverted Pendulum,” Intermountain Engineering Technology and Computing Conference (IEEE), May. 2024, Utah, USA.

57.    Marco P. Schoen, Marcel Oettinger, Dajan Mimic, “Deep and Machine Learning-based Methods for Defect Classification in Jet Engines,” Intermountain Engineering Technology and Computing Conference (IEEE), May 2023, Utah, USA.

58.    Kellie Wilson and Marco P. Schoen, “Modeling Axial Compressor Systems Using Deep Learning Methods,” Intermountain Engineering Technology and Computing Conference (IEEE), May 2023, Utah, USA.

59.    Golam Gause Jaman, Asa Monson, Kanan Roy Chowdhury, Marco P. Schoen, Thomas Walters, System Identification and Machine Learning Model Construction for Reinforcement Learning Control Strategies Applied to LENS System, Intermountain Engineering Technology and Computing Conference (IEEE), May 2022, Utah, USA.

60.    Kellie Wilson, Marco P. Schoen, Ji-Chao Li, Jet Engine Modeling Using T-MATS with Experimental Verification, Intermountain Engineering Technology and Computing Conference (IEEE), May 2022, Utah, USA.

61.    Nusrat Farheen, Golam Gause Jaman, Marco P. Schoen, Object Detection and Navigation Strategy for Obstacle Avoidance Applied to Autonomous Wheel Chair Driving, Intermountain Engineering Technology and Computing Conference (IEEE), May 2022, Utah, USA.

62.    Shishir Khanal, Cooper Dastrup, Andrew Anderson, Anish Sebastian, Marco P. Schoen, Design and Development of a Single-State Axial Compressor Testbench, Intermountain Engineering Technology and Computing Conference (IEEE), May 2022, Utah, USA.

63.    Paul Bodily, Isaac Griffith, Mary Hofle, Omid Heidari, Safal Lama, Avery Conlin, Andrew Christiansen, Delaney Moore, Kellie Wilson, Anish Sebastian and Marco Schoen, “Automating Predictive Maintenance for Energy Efficiency via Machine Learning and IoT Sensors,” Proceedings of ISCA 34th International Conference on Computer Applications in Industry and Engineering, 2021, vol 79, pages 54—63

64. Omid Heidari, Kenneth Stone, Shovan Chowdhury, Tyler Hedgepeth, Alba Perez Gracia, Marco P. Schoen, Shane Dittrich, Mike Luna, “Augmented Reality Platform for Robotic Systems Design and Interaction (ARPRI),” 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (AIM 2020), USA.

65. Md Fahdul, Marco P. Schoen, Jichao Li, ”Parameter Identification and Fuzzy Logic Controller Design for a One-Stage Axial Flow Compressor System Based on Moore-Greitzer Model,”

Intermountain Engineering Technology and Computing Conference (IEEE), September 2020, Utah, USA.

66.    Kellie N. Wilson, Marco P. Schoen, “Jet Engine Modeling and Control Using T-MATS,” Intermountain Engineering Technology and Computing Conference (IEEE), September 2020, Utah, USA.

67.    Golam Gause Jaman, Nusrat Farheen, Marco P. Schoen, “Cost Effective Mobile Robots Navigation and Mapping System for Education,” Intermountain Engineering Technology and Computing Conference (IEEE), September 2020, Utah, USA.

68.    Shovan Chowdhury, Marco P. Schoen, “Research Paper Classification Using Machine Learning Techniques,” Intermountain Engineering Technology and Computing Conference (IEEE), September 2020, Utah, USA.

69.    Kenneth Stone, Shane Dittrich, Mike Luna, Alba Perez-Gracia, Omid Heidari, and Marco P. Schoen, “Augmented Reality Interface for Industrial Robot Controllers,” Intermountain Engineering Technology and Computing Conference (IEEE), September 2020, Utah, USA.

70.    Berith De la Cruz-Sanchez, M. Arias Montiel, and Marco P. Schoen, “EMG pattern recognition to control a hand exoskeleton for assisted rehabilitation,” Memorias del XXI Congreso Mexicano de Robotica 2019, November 13-15, 2019, Manzanillo, Colima, Mexico.

71.    Shat C. Pratoomratana and Marco P. Schoen, “Allowing Type-3 Wind Turbines to Participate in Frequency Regulation using a Genetic Algorithm for Parameter Tuning,” the Proceedings of the ASME 2019 Dynamic Systems and Control Conference, October 2019.

72.    Eighdi Aung, Marco P. Schoen, and Jichao Li, “Dynamic Characterization and Identification of Flow in a Blade Passage in Near-Stall Conditions of Axial Compressor Systems,” accepted for publication in the proceedings and presentation at the ASME Turbo Expo 2019, July 17-21, Phoenix Arizona, USA.

73.    Asif A. Ahmed, Marco P. Schoen, and Ken W. Bosworth, “System Identification using Nuclear Norm & Tabu Search Optimization,” Proceedings of the 8th TSME International Conference on Mechanical Engineering, Bangkok, Thailand, Dec. 13-15, 2017.

74. Christopher Bitkofer, Marco P. Schoen, Ji-chao Li, Feng Lin, “Characteristic Moore-Greitzer Model Parameter Identification for a one stage Axial Compressor System,” American Control Conference, Seattle, May 2017.

75.    Marco P. Schoen, Ji-Chao Lee, Feng Lin, "Identification of Axial Compressor Dynamics using Tabu Search Optimization," Proceedings of the 17th IFAC Symposium on System Identification, SYSID 2015 Beijing, China on October 19-21, 2015.

76.    Kumar P., Devanand R., Schoen M.P., “sEMG and Skeletal Muscle Force Modeling: A Nonlinear Hammerstein-Wiener Model, Multiple Regression Model and Entropy based Threshold Approach,” Proceedings of the 2nd International Electronic Conference on Entropy and its Application, on-line, hosted by University of California, Santa Barbara, November 15-30, 2015.

77.    Marco P. Schoen, Ji-Chao Lee, Feng Lin, "Identification of Coupling Dynamics due to Tip Air injection in an Axial Flow Compressor," Proceedings of the International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Genoa, Italy, July 2015.

78.    D.M. Sterbentz, S. Prasai, M. Hofle, T. Walters, J.c. Li, F. Lin, K. Bosworth, M. Schoen, "System Identification and Modeling of the Dynamics within an Axial compressor's Blade Passage," Proceedings of the International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Genoa, Italy, July, 2015.

79.    M. Anugolu, C. Potluri, A. Urfer, and M. P. Schoen, “A Motor Point Identification Technique Based on Dempster Shafer Theory,” Proceedings of the 7th Dynamic Systems and Control Conference, San Antonio, Texas, USA, October 22-24, 2014.

80.    Anish Sebastian, Marco P. Schoen, “Hybrid particle swarm – Tabu search optimization algorithm for parameter estimation,” Dynamic Systems and Control Conference, Paulo Alto, CA, October 20-24, 2013.

81.    C. Potluri, M. Anugolu. M.P. Schoen, D.S. Naidu, A. Urfer, C. Rieger, “Computational Intelligence Based Data Fusion Algorithm for Dynamic sEMG and Skeletal Muscle Force Modeling,” 6th International Symposium on Resilient Control Systems, San Francisco, CA, August 13 – 15, 2013.

82.    Alex N. Jensen, Amanda J. Clark, Nathan T. Sparks, Steve Chiu, Marco P. Schoen, “Embedded Electroencephalogram Processing and Control for Actuation of a Prosthetic Thumb Prototype,” IEEE International Conference on Electro/Information Technology, Rapid City, SD, May 9-11, 2013.

83. Pavan Kumar Yarlagadda, Yimesker Yihun, Alba Perez-Garcia, and Marco P. Schoen, “Real Time Finger Joint Angle Control for Prosthetics using sEMG Sensor and System Identification,” submitted for review to the 11th International Symposium, Computer Methods in Biomechanics and Biomedical Engineering, Salt Lake City, Utah, April 3 – 7, 2013.

84. Chandrasekhar Potluri, Madhavi Anugolu, Steve Chiu, Alex Urfer, Marco P. Schoen, D. Subbaram Naidu, “Fusion of Spectral Models for Dynamic Modeling of sEMG and Skeletal Muscle Force,” Proceedings of the 34th Annual International Conference of the IEEE Engineering in Medicine & biology Society, San Diego, August 28-September 1, 2012.

85. Chandrasekhar Potluri, Madhavi Anugolu, Steve Chiu, Marco P. Schoen, D. Subbaram Naidu, “A sEMG based Real-time Adaptive Joint Angle Estimation and Control for a Prosthetic Hand Prototype,” Proceedings of the 12th WSEAS International Conference on Systems Theory and Scientific Computation (ISTASC ’12), Istanbul, Turkey, August 21-23, 2012.

86. Madhavi Anugolu, Chandrasekhar Potluri, Steve Chiu, Alex Urfer, Jim Creelman and Marco P. Schoen, “A sEMG-skeletal muscle force data fusion based on minimum description length criterion” Proceedings of the 2012 ICIA World Conference, Las Vegas, July 16-19, 2012.

87. M. Anugolu, C. Potluri, P. Kumar, M. P. Schoen, “Genetic Algorithm Based Optimization of Kullback Information Criterion: Improved System Identification of Skeletal Muscle Force and sEMG Signals,” Proceedings of the 2012 IEEE International Instrumentation and Measurement Technology Conference, Graz, Austria, May 2012.

88. Alex Urfer, Jim Creelman, Parmod Kumar, Anish Sebastion, Madhavi Anugolu, and Marco Schoen, “The Development of a Functional Amputation Residuum Measurement of the Upper Extremity for Potential Myoelectric Prosthesis Use,” Combined Sections meeting of the American Physical Therapy Association, Chicago, February 8-11, 2012.

89.    C. Potluri, M. Anugolu, Y. Yihun, A. Jensen, S. Chiu, M. P. Schoen, D. S. Naidu, “Optimal Tracking of a sEMG based Force Model for a Prosthetic Hand,” Proceedings of the 33rd Annual International IEEE EMBS Conference, Boston, MA, August 30- September 3, 2011.

90.    M. Anugolu, C. Potluri, A. Ilyas, P. Kumar, S. Chiu, N. Devine, A. Urfer, M. P. Schoen, “A Review on Sensory Feedback for sEMG Based Prosthetic Hands,” Proceedings of the International Conference on Artificail Intelligence, ICAI’11, Las Vegas, NV, July 18-21, 2011.

91.    Alexander Urfer, Jim Creelman, Parmod Kumar, Anish Sebastian, Madhavi Anugolu, and Marco P. Schoen, “The Development of a Functional Amputation Residuum Measurement of the Upper Extremity for Potential Myoelectric Prosthesis Use,” APTA-American Physical Therapy Association's CSM 2012, Tampa FL, February 2 – 13, 2012.

92.    Parmod Kumar, Anish Sebastian, Chandrasekhar Potluri, Adnan Ilyas, Madhavi Anugolu, Alex Urfer, Marco P. Schoen, “Adaptive Finger Angle Estimation from sEMG Data with Multiple Linear and Nonlinear Model Data Fusion,” Proceedings of the WSEAS 10th International Conference on Dynamical Systems and Control, Iasi, Rumania, pp. 154 – 159, July 1 -3, 2011.

93.    Anish Sebastian, Parmod Kumar, Marco P. Schoen, “Optimized Spatial Filter Mask using Genetic Algorithm and System Identification for Modeling sEMG and Finger Force Signals,” Proceedings of the WSEAS 10th International Conference on Dynamical Systems and Control, Iasi, Rumania, pp. 136 – 141, July 1 -3, 2011.

94.    Anish Sebastian, Parmod Kumar, Marco P. Schoen, “Evaluation of Filtering Techniques applied to surface EMG data and Comparison based on Hammerstein-Wiener Models,” Proceedings of the WSEAS 10th International Conference on Dynamical Systems and Control, Iasi, Rumania, pp. 130 – 135, July 1 -3, 2011. – BEST CONFERENCE PAPER AWARD

95.    P. Kumar, C. Potluri, A. Sebastian, Y. Yihun, A. Ilyas, M. Anugolu, R. Sharma, S. Chiu, J. Creelman, A. Urfer, D.S. Naidu, and M. P. Schoen, “A Hybrid Adaptive Multi Sensor Data Fusion for Estimation of Skeletal Muscle Force for Prosthetic Hand Control,” International Conference on Artificail Intelligence, ICAI’11, Las Vegas, NV, July 18-21, 2011.

96.    P. Kumar, A. Sebastian, J. Creelman, A. Urfer, and M. P. Schoen, “Spectral Analysis of sEMG Signals to Investigate Skeletal Muscle Fatigue,” Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference, Orlando FL, December 12-15, 2011.

97.    Saad Aziz, Arya Ebrahimpour, John Gale, Marco P. Schoen, “Passive Control of a Wind Turbine using Composite Material,” submitted for review to the 2011 ASME Exposition and World Congress, Denver, CO, November 2011.

98.    C. Potluri, Y. Yihun, M. Anugolu, P. Kumar, M. Anugolu, S. Chiu, M.P. Schoen, D.S. Naidu, “Implementation of sEMG-Based Real-Time Embedded Adaptive Finger Force Control for Prosthetic Hand,” Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference, Orlando FL, December 12-15, 2011.

99.    P. Kumar, A. Sebastian, M. Anugolu, C. Potluri, A. Fassih, Y. Yihun, A. Jensen, Y. Tang, C.-H. Chen, S. Chiu, K. Bosworth, D.S. Naidu, J. Creelman, A. Urfer, and Marco P. Schoen, “An Adaptive Hybrid Data Fusion Based Identification of Skeletal Muscle Force with ANFIS and Smoothing Spline Curve Fitting,” Proceedings of the 2011 IEEE International Conference on Fuzzy Systems, Taipei, Taiwan, June 27-30, 2011.

100. Li Jichao, Wang Sichen, Wang Yongsheng, Lin Feng, Nie Chaoqun, and Marco P. Schoen, “A Technique to Calibrate Cavity Effect in Unsteady pressure Probes with High Frequency Response,” submitted for review, November 2010

101. Amir Fassih, D. Subbaram Naidu, Steve Chiu and Marco P. Schoen, “Precision Grasping of a Prosthetic Hand Based upon Virtual Spring Damper Hypothesis,” Proceedings of the IEEE 5th Cairo International Conference on Biomedical Engineering (CIBEC), Cairo, Egypt, December 16-18, 2010.

102. Vidya Nandikolla, Marco P. Schoen, Suhas Pharkute, Uwe Rieschl, Ajay Mahajan, “Adaptive Multi Airbag Shoe Insert Model for Diabetic Foot Care,” Proceedings of the ASME ECTC conference, October 1-2, 2010, Atlanta, GA, USA

103. Parmod Kumar, Chandrasekhar Potluri, Madhavi Anugolu, Anish Sebastian, Steve Chiu, Alex Urfer, D. Subbaram Naidu, Marco P. Schoen, “A Hybrid Adaptive Data Fusion with Linear and Nonlinear Models for Skeletal Muscle Force Estimation,” Proceedings of the IEEE 5th Cairo International Conference on Biomedical Engineering (CIBEC), Cairo, Egypt, December 16-18, 2010.

104. Amir Fassih, D. Subbaram Naidu, Steve Chiu, and Marco P. Schoen, “Power Grasping of a Multi-DOFs Prosthetic Hand Based upon Virtual Spring-Damper Hypothesis,” Proceedings of the IASTED International Conference on Robotics and Applications, Cambridge, MA, November 1-3, 2010.

105. Parmod Kumar, Chandrasekhar Potluri, Anish Sebastian, Steve Chiu, Alex Urfer, D. Subbaram Naidu, Marco P. Schoen, “An Adaptive Multi Sensor Data Fusion with Hybrid Nonlinear ARX and Wiener-Hammerstein Models for Skeletal Muscle Force Estimation,” Proceedings of the WSEAS Systems Conference, pp. 186 – 191, July 22-24, 2010, Corfu, Greece.

106. Anish Sebastian, Parmod Kumar, Marco P. Schoen, “A Study on Hybridization of Particle Swarm and Tabu Search Algorithms for unconstrained Optimization and Estimation Problems,” Proceedings of the WSEAS Systems Conference, pp. 458 -463, July 22-24, 2010, Corfu, Greece.

107. Cheng-Hung Chen, D. Subbaram Naidu, Marco P. Schoen, “An Adaptive Control Strategy for a Five-Fingered Prosthetic Hand,” Proceedings of the WSEAS Systems Conference, pp. 405 -410, July 22-24, 2010, Corfu, Greece.

108. Parmod Kumar, Nikesh Joshi, Chandrasekhar Potluri, Jensen Alex, Marco P. Schoen, Steve Chiu, “Genetic Algorithm Running Time Optimization Using OpenMP Parallel Computing,” Proceedings of the 2010 World Congress in Computer Science Computer Engineering and Applied Computing Conference, Las Vegas, NV, July 12-15, 2010.

109. Anish Sebastian, Parmod Kumar, Marco P. Schoen, Alex Urfer, Jim Creelman, and D. Subbaram Naidu, “Analysis of EMG-Force Relation Using System identification and Hammerstein-Wiener Models,” Proceedings of the Dynamic Systems and Control Conference (DSCC), Boston, MA, September 2010.

110. Parmod Kumar, Anish Sebastian, Chandrasekhar Polturi, Alex Urfer, D. Subbaram Naidu, Marco P. Schoen, “Towards Smart Prosthetic Hand: Adaptive Probability Based Skeletal Muscle Fatigue Model,” Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Buenos Aires, Argentina, August 31-September 2010.

111. Chandrasekhar Potluri, Parmod Kumar, Madhavi Anugolu, Alex Urfer, D. Subbaram Naidu, Marco P. Schoen, “Frequency Domain Surface EMG Sensor Fusion for Estimating Finger Forces,” Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Buenos Aires, Argentina, August 31-September 2010.

112. Chandrasekhar Potluri, Parmod Kumar, Madhavi Anugolu, Alex Urfer, Marco P. Schoen, D. Subbaram Naidu, “sEMG Based Fuzzy Control Strategy with ANFIS Path Planning for Prosthetic Hand,” Proceedings of the 3rd IEEE International Conference on Biomedical Robotics and Biomechatronics, Tokyo, Japan, September 26-30, 2010.

113. Chandrasekhar Potluri, ChandrabhanuVedantam, Shanmuk Anjaneyulu Dasari, Deepak kumar,G.V.S., Avinash M., Marco P. Schoen, and D. Subbaram Naidu, “Hand Gestures Recognition based on sEMG signal using Wavelet and Pattern recognition,” ASECI, December 2009, India.

114. Cheng-Hung Cheng, D. Subbaram Naidu, Alba Perez, Marco P. Schoen, “Hybrid Control Strategy for Five-Fingered Smart Prosthetic Hand,” Proceedings of the 48th IEEE Conference on Decision and Control, Shanghai, December 16-18, 2009.

115. Anish Sebastian, Parmod Kumar, Madhavi Anugolu, Marco P. Schoen, Alex Urfer, D. Subbaram Naidu, “Optimization of Bayesian Filters and Hammerstein-Wiener Models for EMG-Force Signals using Genetic Algorithm,” Proceedings of the Dynamic Systems and Control Conference (DSCC), Hollywood, CA, October 2009.

116. Madhavi Anugolu, Anish Sebastian, Parmod Kumar, Marco P. Schoen, Alex Urfer, D. Subbaram Naidu, “Surface EMG Array Sensor Based Model Fusion using Bayesian Approaches for Prosthetic Hands,” Proceedings of the Dynamic Systems and Control Conference (DSCC), Hollywood, CA, October 2009.

117. Cheng-Hung Chen, D. Subbaram Naidu, Alba Perez-Gracia, Marco P. Schoen, “Hybrid Control Strategy for Smart Prosthetic Hand,” Proceedings of the Dynamic Systems and Control Conference (DSCC), Hollywood, CA, October 2009.

118. Cheng-Hung Chen, Marco P. Schoen, Ken W. Bosworth, “A Condensed Hybrid Optimization Algorithm Using Enhanced Continuous Tabu Search and Particle Swarm Optimization,” Proceedings of the Dynamic Systems and Control Conference (DSCC), Hollywood, CA, October 2009.

119. Cheng-Hung Chen, D. Subbaram Naidu, Alba Perez-Gracia, Marco P. Schoen, “Hybrid Adaptive Control Strategy for Smart Prosthetic Hand,” Proceedings of the IEEE EMBS Conference, Minneapolis, Minnesota, September 2 – 6, 2009.

120. J. Rafiee, M.A. Rafiee, N. Prause, M.P. Schoen, “Biorobotics: optimized biosignal classification using mother wavelet matrix”, 35th Annual Northeast Bioengineering Conference, Harvard-MIT Division of Health Sciences & Technology, Cambridge, MA, USA, April 3 - 5, 2009.

121. J. Rafiee, M.P. Schoen, N. Prause, A. Urfer, M.A. Rafiee, “A comparison of forearm EMG and psychophysical EEG signals using statistical signal processing”, 2nd IEEE International Conference on Computer, Control and Communication, Karachi, Pakistan, Feb. 17-18, 2009.

122. C.-H. Chen, D. S. Naidu, A. Perez, and M. P. Schoen, “Fusion of Hard and Soft Control Techniques for Prosthetic Hand,” in Proceedings of the IASTED International Conference on Intelligent Systems and Control (ISC 2008), Orlando, FL, USA, November 16-18, pp.120-125, 2008.

123. C.-H. Chen, K. W. Bosworth, and M. P. Schoen, “An Adaptive Particle Swarm Optimization To Multiple Dimensional Problems,” in Proceedings of the IASTED International Symposium on Computational Biology and Bioinformatics (CBB 2008), Orlando, FL, USA, November 16-18, pp. 260-265, 2008.

124. Cheng-Hung Chen, Ken W. Bosworth, Marco P. Schoen, Shawn E. Bearden, D. Subbaram Naidu, and Alba Perez, “A Study of Particle Swarm Optimization on Leukocyte Adhesion Molecules and Control Strategies for Smart Prosthetic Hand,” Proceedings of the IEEE Swarm Intelligent Symposium, Missouri, September 21-23, 2008.

125. D. Subbaram Naidu, Cheng-Hung Chen, Alba Perez, and Marco P. Schoen, “Control Strategies for Smart Prosthetic hand Technology: An Overview,” Proceedings of the 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Vancouver, Canada, August 2008.

126. Marco P. Schoen, Jørgen Hals, and Torgeir Moan, “Robust Control of Heaving Wave Energy Devices in Irregular Waves,” Proceedings of the IEEE 16th Mediterranean Conference on Control and Automation, Ajaccio, Corsica, France. June 2008.

127. Marco P. Schoen, Jørgen Hals, and Torgeir Moan, “Wave Prediction and Fuzzy Logic Control of Wave Energy Converters in Irregular Waves,” Proceedings of the IEEE 16th Mediterranean Conference on Control and Automation, Ajaccio, Corsica, France. June 2008.

128. Cheng-Hung Chen, Ken W. Bosworth, and Marco P. Schoen, “Investigation of Particle Swarm Optimization Dynamics,” Proceedings of IMECE 2007, Paper No. IMECE2007-41343, Seattle Washington, November 11-15, 2007.

129. James C.K. Lai, Marco P. Schoen, Arya Ebrahimpour, Alok Bhushan, Christopehr K. Daniels, and Solomon W. Leung, “Fast-response smart self-assembling biosensors for biomarker detection,” Proceedings of IMECE 2007, Paper No. IMECE2007-42100, Seattle Washington, November 11-15, 2007.

130. Solomon W. Leung, Arya Ebrahimpour, Marco P. Schoen, and James C.K. Lai, “Self-Cleansing Felxible Stent for Prevention of Clogging of Blood Vessels,” Proceedings of IMECE 2007, Paper No. IMECE2007-42118, Seattle Washington, November 11-15, 2007.

131. Barathram Ramkumar, Marco P. Schoen, and Feng Lin, “Application of an Intelligent Hybrid Optimization Technique for Parameter Estimation in the Presence of Colored Noise,” Proceedings of IMECE 2007, Paper No. IMECE2007-41352, Seattle Washington, November 11-15, 2007.

132. Marco P. Schoen, Sinchai Chinvorarat, Chien_Hsun Kuo, “Eigensystem realization with modified genetic algorithm for system identification of noise corrupted processes,” Proceedings of IMECE 2006, Paper No. IMECE2006-13409, Chicago Illinois, November 5-10, 2006.

133. Barathram Ramkumar, Marco P. Schoen, Feng Lin, Brian G. Williams, “Hybrid optimization algorithm using enhanced continuous tabu search and genetic algorithm for parameter estimation,” Proceedings of IMECE 2006, Paper No. IMECE2006-13374, Chicago Illinois, November 5-10, 2006.

134. Vyshali Chitikeshi, Sanjeevi Chitikeshi, Ravinder Gupta, Ajay Mahajan, and Marco P. Schoen, “An Intelligent Foot Monitoring System for Diabetic patients to Prevent Foot Ulcerations,” Proceedings of IMECE 2006, Paper No. IMECE2006-13817, Chicago Illinois, November 5-10, 2006.

135. Karthikeyan Duraisamy, Marco P. Schoen, Alba Perez-Garcia, “Vision-Based Kinematic Synthesis of Hand Motion,” Proceedings of IMECE 2006, Paper No. IMECE2006-14870, Chicago Illinois, November 5-10, 2006.

136. Bryce Knight, Marco P. Schoen, Alba Perez-Garcia, “Distributed Actuation and Shape Control of Ionic Polymer Metal Composites,” Proceedings of IMECE 2006, Paper No. IMECE2006-15826, Chicago Illinois, November 5-10, 2006.

137. Amir Rezaei, Marco P. Schoen, “Innovative Methods in Teaching Fundamental Undergraduate Engineering Courses,” ASEE Annual Conference and Exposition, Paper No. 2006-942, Chicago, June 18-21, 2006.

138. Karthikeyan Duraisamy, Alba Perez, Marco P. Schoen, D. Subbaram Naidu, “Kinematic Synthesis for Smart Hand Prosthesis,” IEEE / RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, Pisa, Italy, February 20-22, 2006.

139. Janice L. Martell, Arya Ebrahimpour, and Marco P. Schoen, “Intelligent Approach to Floor Vibration Control,” Proceedings of IMECE 2005, Paper No. IMECE2005-80037, Orlando FL, November 2005.

140. Vidya Nandlikova, Marco P. Schoen, and Ajay Mahajan, “Active Foot Pressure Control for diabetic Neuropathy during Walking,” Proceedings of IMECE 2005, Paper No. IMECE2005-7979783, Orlando FL, November 2005.

141. Rahul Sekhri, Marco P. Schoen, Feng Lin, and Brian Williams, “Experimental Study of the Dynamics of Synthetic Jet Actuators with Different Orifice Sizes,” Proceedings of IMECE 2005, Paper No. IMECE2005-79777, Orlando FL, November 2005.

142. Ebenezer Seisie-Amoasi, Brian G. Williams, and Marco P. Schoen, “Optimization of a Star Pattern Recognition Algorithm for Attitude Determination using a multi-Objective Genetic Algorithm,” Proceedings of IMECE 2005, Paper No. IMECE2005-79774, Orlando FL, November 2005.

143. Balaje T. Thumati and Marco P. Schoen, “Frequency Based Optimal Input Signal Determination for ARX Parameter Estimation of Constraint Systems,” Proceedings of IMECE 2005, Paper No. IMECE2005-79772, Orlando FL, November 2005.

144. R. C. Hoover, M. P. Schoen, and D. S. Naidu, “Hybrid Computing Techniques for Collaborative Control of UCAVs,” ASME International Mechanical Engineering Conference and Exhibit (IMECE), Orlando, FL, November 5-9, 2005.

145. Randy C. Hoover, Marco P. Schoen, and D. Subbaram Naidu, “Fusion of Hard and Soft Control for Uninhabited Aerial Vehicles,” Proceedings of the 16th IFAC World Congress, Prague Czech Republic, July 4-8, 2005.

146. Marco P. Schoen, Feng Lin, and Sinchai Chinvorarat, “Application of Genetic Algorithms in optimal Excitation and Controller Design,” Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, July 4-8, 2005.

147. Nakhon Guesakul, Sinchai Chinvorarat, and Marco P. Schoen, “Nonlinear System Identification with Extended Kalman Filter of Bubbling Fluidized Bed Incinerator,” IV International Conference System Identification and Control Problems, Moscow, Russia, 25-28 January, 2005.

148. Lucheng Ji, Feng Lin, and Marco P. Schoen, "Numerical Investigations about Active Flow Control over Hump Flow,” 2004 Conference on Aerodynamics, Chinese Academy Society of Engineering Thermophysics, Paper No.042091, Xi An City, China, November, 2004.

149. Marco P. Schoen, Bhag Singh Kelewant Kaur, Sinchai Chinvorarat, Chien-Hsun Kuo, “Predictive Intelligent Filter Design in Signal Processing using AR and ARMA models,” IMECE2004, Anaheim, CA., November 2004.

150. Vidya K. Nandikolla, Marco P. Schoen, Ajay Mahajan, “Active Foot Pressure Control for Diabetic Patients,” IMECE2004, Anaheim, CA, November 2004.

151. Jeffrey T. Bingham, Marco P. Schoen, “Characterization of Myoelectric signals using System Identification Techniques,” IMECE2004, Anaheim, CA, November 2004.

152. Feng Lin, Marco P. Schoen, Ji Lucheng, “On the Application of Intelligent Systems to Active Flow Control,” IMECE2004, Anaheim, CA, November 2004.

153. Brijesh Lavu, Marco P. Schoen, and Ajay Mahajan, “A Genetic Algorithm Approach for Model Reference Adaptive Control of Ionic Polymer Metal Composites,” American Control Conference, Boston, July 2004.

154. Marco P. Schoen, “Dynamic Compensation of Intelligent Sensors,” IMECE 2003, Washington D.C., November 16-21, 2003.

155. Lalitha Paladugu, Marco P. Schoen, and Brian G. Williams, “Intelligent Techniques for Star-Pattern Recognition,” IMECE 2003, Washington D.C., November 16-21, 2003.

156. Sinchai Chinvorarat and Marco P. Schoen, “Deadbeat Predictive Controller: A System Identification Approach,” IEEE International Symposium on Intelligent Control, Houston, Texas, October 5-8, 2003.

157. Lalitha Paladugu, Brian G. Williams, and Marco P. Schoen, “Star Pattern Recognition for Attitude Determination Using Genetic Algorithms,” 17th Annual AIAA/USU Conference on Small Satellites, Logan, UT, August 2003.

158. Marco P. Schoen, Sinchai Chinvorarat, and Gerhard M. Schoen, “Identification and Robust Control of Flexible Space Structures,” American Control Conference, Denver, CO, June 4-6, 2003.

159. Sinchai Chinvorarat and Marco P. Schoen, “Disturbance Rejection in Deadbeat Predictive Control,” International Conference on Circuits, Signal & Systems (CSS2003), Cancun, Mexico, May 19 – 21, 2003.

160. Marco P. Schoen, Sinchai Chinvorarat, Gerhard M. Schoen, “Optimum Input for System Identification for Systems with Actuator Saturation using Genetic Algorithms, “IMECE New Orleans, LA, November 17 – 22, 2002.

161. Carrie Hahn, Ajay Mahajan, and Marco P. Schoen, “Diabetic Patients’ Foot Care Using Smart Materials to Prevent Ulcerations/Amputations, “ SEM Conference, Milwaukee, WI, June 2002.

162. Sinchai Chinvorarat and Marco P. Schoen, “State-space based Modern Control: Application for Predictive Control Design,” 4th WSEAS Conference, Cancun Mexico, May 12 – 16, 2002.

163. Marco P. Schoen, “Input Design for on-line System Identification of a Human Respiratory System,” American Control Conference, Anchorage, AK, May 8 – 10, 2002.

164. Sinchai Chinvorarat and Marco P. Schoen, “Disturbance Rejection in Setpoint Tracking Adaptive Predictive Controller Design,” American Control Conference, Anchorage, AK, May 8 – 10, 2002.

165. Umesh A. Korde and Marco P. Schoen, "Time Domain Control of a Single-Mode Wave Energy Device," ISOPE 2001, Stavanger, Norway, June 17-22, 2001.

166. Marco P. Schoen and Ajay Mahajan, "Input Design for the System Identification (IDSI) of an Ultrasonic 3D Position Estimation System," ASME Winter Meeting, Nashville, Tennessee, November 1999, pp.: 765-770.

167. Sinchai Chinvorarat, Bin Lu, Jen-Kuang Huang, and Marco P. Schoen, "Setpoint Tracking Predictive Control by System Identification Approach," American Control Conference, San Diego, CA, June 2 - 3, 1999, pp.: 331-335.

168. Marco P. Schoen, Chien Hsun Kuo, Sinchai Chinvorat, and Jen-Kuang Huang, “Input Design for Systems under Identification,” AIAA Guidance, Navigation, and Control Conference, Boston MA, pp: 1639-1645, August 1998.

169. Chien Hsun Kuo, Marco P. Schoen, and Jen-Kuang Huang, “Closed-Loop System Identification by Residual Whitening,” AIAA Guidance, Navigation, and Control Conference, Boston MA, pp: 1630-1638, August 1998.

170. Marco P. Schoen, Chien Hsun Kuo, Sinchai Chinvorat, and Jen-Kuan Huang, “Parameter Identifiability for systems under identification using ARX models,” Proceedings of the 18th ASEM National Conference, Virginia Beach VA, October 23 - 26, 1997, pp.: 175-181.

171. Marco P. Schoen, Chien Hsun Kuo, Sinchai Chinvorat, and Jen-Kuan Huang, “Comparison between direct and indirect system identification,” Proceedings of the 18th ASEM National Conference, Virginia Beach VA, October 23 - 26, 1997, pp.: 169-174.

172. Chien Hsun Kuo, Marco P. Schoen, Sinchai Chinvorat, and Jen-Kuan Huang, “Indirect system identification by residual whitening,” Proceedings of the 18th ASEM National Conference, Virginia Beach VA, October 23 - 26, 1997, pp.: 133-140.

173. Schoen M.P., and Jefferis III, R.P., “Simulation of a Controlled Freeze-Drying Process,” Proceedings of the IASTED International Conference on Applied Modeling and Simulation, Vancouver, Canada, July 1993.

Conference Presentations:

174. Jaden Palmer, Christian Done, Kayson Oakey, Atulan Gupta, Janet Franklin, Sidney Hagedorn, and Marco P. Schoen, “Individualized Prosthesis Actuation Design using Adaptive Reinforcement Learning, ,” Intermountain Engineering Technology and Computing Conference (IEEE), May. 2025, Utah, USA.

175. Jorgen Rufner, Andrew Gorman, Troy Holland, Mark Small, Anthony D’Andrea, Zherui Guo, Golam Gause Jaman, and Marco P. Schoen, “Design Overview and Operational Characteristics of a Custom Designed Continuous Electric Field Assisted Sintering System,” TMS 2024, 153rd Annual Meeting& Exhibition, March 3-7, 2024 Orlando, Florida.

176. Golam Gause Jaman, Marco P. Schoen, “Development of Control System Implementation Platform in Advanced Manufacturing,” Intelligent Manufacturing for Extreme Environments IMEE 2024, Idaho Falls, USA, May 2024.

177. Nusrat Farheen, Marco P. Schoen, “Model-Based Reinforcement Learning with System Identification and Fuzzy Reward Applied to Advanced Manufacturing,” Intelligent Manufacturing for Extreme Environments IMEE 2024, Idaho Falls, USA, May 2024.

178. Tristan Barker, Michael Crump, Andrew Anderson, Cooper Dastrup, Kyler Bingham, Shishir Khanal, Peggy Beck, Zakarie Macpherson, Matthew Vadnais, Kellie Wilson, Marco P. Schoen, Converting a J34 Westinghouse Jet Engine into an Axial Compressor Test Stand, Intermountain Engineering Technology and Computing Conference (IEEE), May 2022, Utah, USA.

179. Andrew Anderson, Tristan Barker, Kyler Bingham, Michael Crump, Cooper Dastrup, Shishir Khanal, Peggy Beck, Parker Wegrowski, Randall O’Conner, Nusrat Farheen, Golam Gause Jaman, Zakarie Macpherson, Matthew Vadnais, Kellie Wilson, Marco P. Schoen, Creating a High Velocity Two Stage Rocket, Intermountain Engineering Technology and Computing Conference (IEEE), May 2022, Utah, USA.

180. Brijesh C. Lavu and Marco P. Schoen, “A Genetic Algorithm Approach for Model Reference Adaptive Control of Ionic Polymer Metal Composites,” WEASC International Conference on Advances in Applied Sciences, Engineering Technology, Polymers, Plastics & Robotics (AEPR), September 22- 23, 2018, Athens, Greece.

181. Chien-Hsun Kuo, Sinchai Chinvorarat, Marco P. Schoen, and Jen-Kuang Huang,”Cavity Noise Reduction Using LQG Controller Design,” ASME regional conference, NC, March 27 - 29, 1998.

182. Jeffrey T. Bingham, Marco P. Schoen, “Characterization of Myoelectric signals using System Identification Techniques,” Undergraduate Research Symposium, Idaho State University, April 2004.

183. Bryce Knight, Marco P. Schoen, Alba Perez, “Distributed Actuation and Shape Control of Ionic Polymer Metal Composites,” ISGC Research Symposium, Moscow Idaho, October 19, 2006.

184. Chikashi Sato, Reymer G. Martinez, Larissa Quintana Sanchez, Malcolm S. Shields, Alba Perez-Garcia, Marco P. Schoen, and Yoshiko Fujita, “Generation of Electricity and Characterization of Bacterial Growth in A Single-Chamber Microbial Fuel Cell,” Intermountain Conference on the Environment, September 2007.

185. Carlos O. Maidana, Marco P. Schoen, Kalyan Jinnuri, Brian Williams, Lawrence Beaty, “Development of a low-cost 3D Particle Image Velocimetry for sub-sonic wind tunnel applications at Idaho State University,” 9th Annual Meeting of the Northwest Section of the American Physical Society, May 18, 2007.

186. Chikashi Sato, Larissa Quintana Sanchez, Rishika Sharma, Malcolm S. Shields, Marco P. Schoen, Alba Perez-Garcia, and Yoshiko Fujita, “Generation of Electricity in a Single-Chamber Microbial Fuel Cell, fueled by Potato Process Wastewater,” Idaho Academy of Science 50th Anniversary Meeting, Boise State University - March 27 - 29, 2008.

187. C. Bitikofer and M.P. Schoen, “Identification of the Moore-Greitzer model parameters in axial compressor systems,” IASE/ICE Symposium, March/April 2016. Best Presentation Award

188. Asif Ahmet, Ken Bosworth and Marco P. Schoen, “Nuclear Norm System Identification using Tabu Search Optimization” in preparation to be submitted for review to the IASE/ICE Symposium, March/April 2016.

189. Rassmussen C., Sluder D., Cardillo O., Schoen M. P., “Sensory feedback using electrical and mechanical array stimulator for upper body amputees,” in preparation to be submitted for review to the IASE/ICE Symposium, March/April 2016.

190. Eighdi Aung and Marco P. Schoen, “Dynamic characterization and Identification of flow in a blade passage in near-stall conditions of axial compressor systems,” ISU Undergraduate Research Symposium, April 2019. Best Poster Award