1. A Vivek Pandey, R Seetharam, H. Chelladurai.   "Comprehensive review: Discussed the effect of high-entropy alloys as reinforcement on metal matrix composite properties, fabrication techniques, and applications, Journal of Alloys and Compounds (Accepted SCI, Elsevier, IF=6.2).

2. Harikrishna, Katika, M. J. Davidson, R. Seetharam, Saravana Sundar, Characteristics of Work Hardening and Constitutive Models Comparisons of Powder Metallurgy Al-5.6%Zn-2%Mg Alloy During Hot Compression. Journal of Central South University 31, no. 2 (2024): 346-368) (SCI, Springer, IF=4.4). 

3. Deepak Kumar, R. Seetharam, and K. Ponappa. "A Review on Microstructures, Mechanical Properties and Processing of High Entropy Alloys Reinforced Composite Materials." Journal of Alloys and Compounds (2023): 172732. (SCI, Elsevier, IF=6.2). 

4. Harikrishna, Katika, M. J. Davidson, R. Seetharam, Saravana Sundar, and K. S. Rajmohan. "Investigating the effects of deformation-induced densification on the constitutive behavior and corrosion resistance of Al–Zn–Mg powder metallurgy alloy during hot deformation." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023): 14644207231207820. (SCI, SAGE, IF=2.5).

5. Deepak Kumar, Santosh Kumar Rajak, R. Seetharam, and Harpreet Singh. "Effects of hBN and Y2O3 Addition on Mechanical and Tribological Behavior of SiC Ceramic Matrix Composites Prepared by Spark Plasma Sintering." Silicon (2022): 1-15. DOI:10.1007/s12633-022-02184-7  (SCI, Springer, IF = 2.94).

6. Deepak Kumar, Santosh Kumar Rajak, R. Seetharam, and Harpreet Singh. "Effect of Y2O3 Additive on Mechanical and Wear Behaviour of hBN Reinforced SiC Ceramic matrix composite." Materials Today: Proceedings (2023). (Scopus, Elsevier).

7. Santosh Kumar Rajak, Deepak Kumar, R. Seetharam, and Puneet Tandon. "Mechanical and dry sliding wear analysis of porcelain reinforced SAE660 bronze bearing alloy composite fabricated by stir casting method." Materials Today: Proceedings (2023). (Scopus, Elsevier).

8. Gaurav Rathore, and R. Seetharam. "Investigation of mechanical properties of glass fibre/SiC-B4C reinforced hybrid polymer composite." Materials Today: Proceedings 87 (2023): 345-350. (Scopus, Elsevier).

9. Madhukar Pagidi, Vipin Mishra, Selvaraj N, Rao CSP, Veeresh Kumar GB, R. Seetharam, Murthy Chavali, Faruq Mohammad, Ahmed A Soleiman, Influence of ultrasonic vibration towards the microstructure refinement and particulate distribution of AA7150-B4C nanocomposite. Coatings 12(3) 3 (2022) 1-15., DOI: 10.1002/nano.20210009. (SCI, MDPI, IF=3.4)

10. R. Seetharam, S. Kanmani Subbu, M. J. Davidson, K.R. Ramkumar and Pagidi Madhukar, “Influence of Reinforcement Particles on Dynamically Recrystallised Geain of Hot Upset SinteredAl-B4C Composites. Journal of Materials Engineering and Performance (2022): 1-14. DOI:10.1007/s11665-022-06955-6. (SCI, IF = 2.3).

11. R. Seetharam, P. Madhukar, G. Yoganjaneyulu. S. Kanmani Subbu, M. J. Davidson. Mathematical Models to Predict Flow Stress and Dynamically Recrystallized Grain Size of Deformed AA7150-5 wt% B4C Composite Fabricated Using Ultrasonic-Probe Assisted Stir Casting Process. Metals and Materials International (2021) https://doi.org/10.1007/s12540-021-00967-y. (SCI, Springer, IF=3.5).

12. Pagidi Madhukar, N. Selvaraj, Veeresh Kumar G B, C. S. P. Rao, Faruq Mohammad, R. Seetharam, Murthy CHAVALI. Influence of TiC nano‐particulates on the physical and mechanical properties of AA7150‐TiC MMC: Fabricated by advanced novel process. Nano select, 3(1) (2021), 78-90. DOI: 10.1002/nano.202100094.

13. R. Seetharam, S. Kanmani Subbu, M. J. Davidson. “Modeling Flow Behavior of Sintered Al- 4%B4C Composite during High-Temperature Upsetting”, Journal of Material Research Express 6(12) (2020), 1265f1., DOI:10.1088/2053-1591/ab6371. (SCI, IOP IF = 2.3)

14. R. Seetharam, S. Kanmani Subbu, and M.J. Davidson, “Microstructure modeling of dynamically recrystallization grain size of Al-4%B4C composite during hot upsetting”, Journal of Engineering Materials and Technology, 1401(2) (2018), 021003. DOI: 10.1 115/1.4037660. (SCI, ASME, IF = 1.354)

15. R. Seetharam, S. Kanmani Subbu, M. J. Davidson, “Analysis of Grain Size Evolution of Sintered Al–4wt%B4C Preforms Subjected to Hot Compression”, Journal of Metallography, Microstructure and Analysis 7 (2) (2018) 176-183. DOI: 10.1007/s13632-018-0425-6. (ESCI, Springer, IF=1.6)

16. R. Seetharam, S. Kanmani Subbu and M.  J.  Davidson, “Hot workability and densification behaviour of sintered powder metallurgy Al-B4Cpreforms during upsetting”. Journal of Manufacturing Process, 28(2017), 309 – 318. DOI: 10.1016/j.jmapro.2017.06.012. (SCI, Elsevier, IF = 6.2)

17. R. Seetharam, S. Kanmani Subbu and M. J. Davidson, “Influence of Temperature on the Workability and Hardness of Sintered Al-4%B4C in Upsetting Test”, Journal of Procedia engineering, 173 (2017), 910 – 917. DOI: 10.1016/j.proeng.2016.12.140. (Scopus, Elsevier).

List of Conferences Publications

1. Deepak Kumar, R Seetharam, K PonappaInvestigation of Microstructural and Mechanical Properties of Mg-HEA Nanocomposite through Ultrasonic Assisted Stir Casting TechniquesProceedings of the International Conference on Sustainable Energy Technologies - ICSET2023, 10- 11Nov; Ho Chi Minh City, Vietnam.

2. Santosh Kumar Rajak, Ankit Kumar Gupta, R. Seetharam, and Puneet Tandon "Effect of Process Parameters on Surface Quality during Incremental Forming of Thin Sheets of Inconel 625 9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) | December 08-10, 2023 | IIT (BHU) Varanasi.

3. Deepak Kumar, R Seetharam, K Ponappa, Effect of High-Entropy Alloy Nanoparticles on the Microstructure and Mechanical behaviour of AA7150 Nanocomposite9th International & 30th All India Manufacturing Technology, Design & Research Conference (AIMTDR 2023) | December 08-10, 2023 | IIT (BHU) Varanasi.

4. Deepak Kumar, Santosh Kumar Rajak, R Seetharam, Harpreet Singh “Synergetic effect of hBN and Additive Y2O3 on the Mechanical and Wear behaviour of SiC-hBN ceramic matrix composite” , IMPAST Conference 2022, IIT Madras.

5. Santosh Kumar Rajak, Deepak Kumar, R. Seetharam, Puneet Tandon “Mechanical and sliding wear analysis of Porcelain reinforced SAE660 Bronze bearing alloy composite fabricated by stir casting method” IMPAST Conference 2022, IIT Madras.

6. Gaurav Rathore, R. Seetharam, Investigation of Mechanical Properties of Glass Fibre/SiC- B4C Reinforced Hybrid Polymer Composite. IMPAST Conference 2022, IIT Madras.

7. R. Seetharam, S. Kanmani Subbu and M. J. Davidson, “Influence of Temperature on the Workability and Hardness of Sintered Al-4%B4C in Upsetting Test”, 11th International Symposium on Plasticity and Impact Mechanics, IMPLAST 2016 (IITDelhi).

8. R. Seetharam, S. Kanmani Subbu and M. J. Davidson, “Densification and flow behavior of sintered Al-4%B4C composite during hot upsetting”, Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference Pune.