Locate the Refill settings in Settings. Then, select [Refill Starch Water].

Press [Adjust Pot Angle] to tilt the pot so it lays flat.

Press [Pause Mixer] to stop the starch water mixer from spinning. Do not remove the starch water container until this step is done.

Carefully remove the starch water container from the holder.

We recommend a water to starch ratio of over 6:1. Once the starch and water solution is filled, place the cup back onto the holder and ensure the cup is not tilted.

Once the starch water container is placed back into the holder, press [< Back] to start the starch water mixer and tilt the pot angle back to the normal position.