3D print one

My 50 possible problems

For my 3D I made a name tag with a stand When I brought it home it broke

What I have learned in this project is how to make a 3D print in the right way I also learned that you have to try to get your project as close as you can to the ground because if it is not you will wast filament

Out of the 7 standers that my project tied to were digital Citizen because I did not go into some other persons account and destroy there project, it also tied to empowered learner because I decided what I was going do. Also Global Collaborator because I put it on my website.

The challenges I faced during this project were 1st getting the object as close as possible to the ground. The second challenge I faced was get the letters the same size as each other and with that I struggled in lining them up in a straight line. I overcame these challenges be by trying and trying until I got it right and it looked right and good

Something I would have done differently is making the latter in Michigan bigger I say this because when it was printed Michigan did not show.

This skill can be used in building, repairing a vehicle.