For this assignment we were given the task to chose and create one of the competetion from the TSA Tech Day event. We had the options of Conceptual Design, Gravity Car Challenge, Manufacturing Prototype, Robotic Challenge, and Structural Design. I chose Conceptual Design and had a total of 3 weeks to complete it.
Intro
Detailed Problem Statement
Background Research
Brainstorming
Detailed Plan and Description
Work Log
Feedback and Reflection
Final Design
The goal of the TSA Tech Day project for me was to create a Co2 dragster car that followed all the specifications (seen below) while having the fastest time possible. I was given about three weeks (8/14/25-9/3/25) to create a plan, my project, a presentation, and my portfolio. I was allowed to use anything in the lab to create my project and anything I managed to buy. Other than time constraints all my constraints are from the TSA competition itself.
With this project I had 3 different design choices. Two of them were completely new designs that each had their pros and cons, and one was an old design that I made before adjusted to meet spec. I ended up going with my modified design because it has produced good results in the past. What then ended up doing what taking the CAD model of the old design, duplicated it, and started to modify and expand on it. I made multiple parts, assemblies , and drawings to help me build the physical model. I then wrote my bill of materials which ended up not costing me anything (provided by the lab unless I messed up the balsa wood blank).
Create a CAD model of a full dragster based on the blueprint above.
Create a template of the front and top views of the dragster body and print it out on a ANSI size B paper.
Drill the holes for your dragster axles according to specifications using a 3/16" wood drill bit.
Cut out the template and attach the views onto your balsa wood blanks.
Cut off the excess wood and sand the body smooth.
Choose a spray-paint color and paint the dragster sanding in between coats of paint until smooth (increasing the grit by about 20-40 each time).
Cut you axles using a Dremel and metal bit to the desired length.
Place the screw-eyes on the bottom of the dragster according to specifications.
Assemble the dragster by putting the axles in the holes and placing a wheel and eyelet on each side of an axle (make sure the specifications are right for the front and back axles).
8/14/25- I started brainstorming types of dragster designs I could use. I came up with three designs (one modified version of one I used in the past) and I started weighting the pros and cons of each and which would fit my objective.
8/15/25- I decided to go with the old model modified and decided to get started with the CAD model. I managed to modify the old CAD model to fit the specifications and I started on the orthographic drawing. My goal is to finish the entire CAD model during the weekend so I can start physical work on Monday.
8/19/25-I printed and cut out my blueprints for the balsa wood blank and started cutting it with a band saw. I got the side profile cut and sanded and tomorrow I will cut the top view.
8/20/25- I cut and sanded the top view of the dragster and finished the entire dragster body shape. I then chose my spray-paint color and started priming the dragster for painting.
8/22/25- I painted the final base coats of blue and sanded between each coat. I started the black acrylic half. I also check to make sure that the dragster body was in the specifications and it passed.
8/25/25- I assembled the dragster this day after cutting the axles. I checked the specifications of the entire dragster and I finished my presentation.
What Went Well: Using balsa wood as the body material made it so I didn't have to cut as much out as I originally planed. It also made the paint and sanding job smoother and overall was easier to cut. I did a better job this time calculating weight distribution as well, checking it every time I cut things.
What Didn't Go Well: I didn't cut the axles holes well enough at first (because I used the wrong drill bit), however I did fix it at the end. Using acrylic on top of spray-paint wasn't the best idea since the materials didn't mesh well together.
Overall: I did a way better job this time around creating a dragster. Although there were hiccups along the way I ended up overcoming them for the most part (and learned some things).
This is the final presentation I used to communicate my holiday design.