For this assignment, we were given the task to choose and create a Christmas-themed automation. We were given the month of December to work on this project. I decided to create an automation involving the opening of presents.
Intro
Detailed Problem Statement
Background Research
Brainstorming
Detailed Plan and Description
Work Log
Feedback and Reflection
Final Design
The goal of the Holiday Automata project was to build a holiday-themed automaton that was powered either mechanically or electrically, not exceed $15.00, fit entirely in a 6"x 8" x 12" rectangular prism, have an axle, have two cams, and have realistic motion. We were instructed to brainstorm, create a CAD model, a motion graph, and a finished product to display.
With this project I had 3 different design choices. Two of them were completely designs that each had their pros and cons (one was santa going through chimneys and the other was a f-18 pulling reindeer), and one was a set of gifts opening and closing. I ended up going with the gifts opening and closing due to the timeframe I had and it being the most doable options of the three( only 2 cams were needed for this design vs the three or four needed for the other two).
(see descion matrix in manufacturing document)
Create a motion graph based on your sketched design.
Utilize it to create a CAD model of your design using the measurements above.
Laser-cut the base out of wood and stain it with a light finish
3d print all cams, shafts, and parts that aren't the base.
Assemble with wood glue, super glue, or whatever preferred adhesive.
Display
12/1/25- I started brainstorming types of automata designs I could make. I also looked at the scope of work for the project to see all the requirements that I needed.
12/4/25- I completed my brainstorming and decision matrix and started my CAD model today.
12/9/25- I continued working on my CAD model today. I had to do research on how to properly make the cams, but it ended up working out.
12/11/25- I finished my CAD model and made my blueprint drawing this day. I also planned how I was going to manufacture the product.
12/15/25- I started manufacturing this day. I lasercut the base and started to properly stain it.
12/19/25- I got the rest of the manufacturing process I needed to do in the lab done this day. I took the parts I had home and finished over the break.
I was able to effectively design the CAD model and manufacture the base well. I had to do a lot of research on certain assembly mates, but the CAD model simulated perfectly based on my simulation graph.
I didn't allocate my manufacturing time effectively and didn't have time to 3D print the other parts. What I ended up having to do was tweak the design and use the resources I had to achieve the goal. It completed the task it meant to, and it followed my design, but it looked less polished overall.