For this assignment we were given the task to learn about bluetooth create a speaker that speaks to us personally to display in our house. After researching for this project, I decided to go with a design that speaks to my interest in working with wood.
Intro
Detailed Problem Statement
Background Research
Brainstorming
Detailed Plan and Description
Work Log
Feedback and Reflection
Final Design
The goal of the Speaker Project was to create a speaker with the components provided that was custom to us. During this process, we had to research Bluetooth and what makes a good speaker, create 3 concept sketches, create a CAD model, create CAD blueprints, create a wiring diagram, and manufacture our speaker. We were allowed to use any material in the lab or purchased by us for the enclosure, but were required to use the specific electronic components issued to us. The timeframe we were given was from January 7th to February 13th(About 6 weeks). We had required checkpoints set up for us along the way and required assignments (see scope of work). We had no dimension requirements this time around.
With this project, I had 3 different design choices. I compiled them into a document for research and plans (as seen to the side). I made them into concept sketches and decided to go with the first option because I like the roundness of the design and I felt it would test my ability to work with wood more than the other two designs. I did not have to draft a bill of materials due to all the components being provided, and I used materials from the lab for my enclosure ( the wood stain I used was a personal jar that I already had beforehand).
Create a concept sketch of the design to gather ideas.
Create a CAD model of a full dragster based on the blueprint above.
Create a dxf sketch of the speaker plate, back plate, and side piece(x2), and laser cut them out of 3/8" plywood.
Laser cut 2 5"x4" pieces and 2 4"x4" pieces out of 3/8" plywood aswell.
Stain the speaker plate piece and side pieces with water-based red mahogany wood stain.
Attach the speaker and switch through the speaker plate.
Wire your components according to the wiring diagram above and hot glue your charge controller and Bluetooth amplifier module to the back plate and put the usb port through the hole.
Test to make sure the components work as intended.
Box in your components by gluing the front and back plate together with the box created by the 5" x 4" and the 4" x 4" pieces (5"x 4" pieces on the top and bottom, 4"x 4" pieces on the sides)
Create a design with balsa wood that fits in a 5" x 4" box
Glue the side pieces to the balsa wood panel.
Glue those pieces on top of the speaker plate, lining up the edges.
Stain all the outside pieces with the same wood stain.
Finish with a matte clear coat!
1/7/26- We started the project this day. I looked at the scope of work and the videos, and I learned how bluetooth and speakers work,
1/8/26- We did a brainstorming activity through brisk. It was about making a speaker with cheap materials, and the brisk agent checked our understanding of the process.
1/12/26-I worked on finishing my concept sketches this day. I finished the coloring on the second sketch and started drawing the third sketch.
1/13/26- I finished my concept sketches and portfolio research this day. I put the notes in my portfolio research and made my decision on which speaker design I would pursue.
1/19/26- I painted the final base coats of blue and sanded between each coat. I started the black acrylic half. I also check to make sure that the dragster body was in the specifications and it passed.
1/21/26- I finished my wiring diagram and drawings this day. I created my wiring diagram in circuit-diagram.org using the components and created my drawings in Onshape.
No Manufacturing work could be done due to inclement weather and the absence of instructors.
2/2/26-I started manufacturing this day. I laser cut the base files that I needed for the speaker and did a test fit. (I had to make a new version of the speaker plate)
2/5/26- I continued wiring this day. I focused on getting the wiring connections to the charge controller right as that was the most difficult part.
2/10/26- I put the skeleton of the speaker together this day. I put all the wiring in the frame and glued it together. I tested it along the way to make sure the wiring still worked.
2/13/26- I fully assembled the speaker this day. I put the side walls in and completely enclosed it. I also made the balsa frame design and put it on the front.
What Went Well: Making the enclosure and wiring went pretty well. I did have some hiccups but they were minor and really specific. The staining and finishing job I did on the wood was one of my better attempts and I'm proud of the matte look.
What Didn't Go Well: I wasn't able to bend the thin wood I had to make curved sides (due to the makeup of it it wouldn't bend with hot water), so I had to close the sides with 4" x 4" pieces. The wiring went wrong initially, at first only because my wires weren't in the specific order for the switch (it followed both mine and the example diagram correctly, the switch that I had was particular).
Overall: This was a solid attempt at making a bluetooth speaker. I like the enclosure design and it fits on my desk exactly like I imagined it to. The speakers are solid as well. Although I had some hiccups, my ability to persevere made a good, usable product at the end.
This is the video I used to communicate my design.