國際期刊論文
International Publications
International Publications
Le, T.-L., Hsieh, M.-F.: A sliding mode-based single-loop control strategy for permanent magnet synchronous motor drives. IET Power Electron. 17, 78–91 (2024). https://doi.org/10.1049/pel2.12616
T.-L. Le and M.-F. Hsieh, An enhanced direct torque control strategy with composite controller for permanent magnet synchronous motor, Asian J. Control (2024), 1–20, DOI 10.1002/asjc.3306.
M. -F. Hsieh, A. T. Huynh, V. -V. Do, D. Gerada and C. Gerada, "Design Optimization of Spoke-Type Flux-Intensifying PM Motor With Asymmetric Rotor Configuration for Improved Performance," in IEEE Transactions on Magnetics, vol. 60, no. 9, pp. 1-5, Sept. 2024, Art no. 8203905, doi: 10.1109/TMAG.2024.3428416.
L. J. F. C. Vera and M. -F. Hsieh, "Investigating the Impact of Characteristic Current on IPMSM Efficiency Area in Flux-Weakening Region," in IEEE Transactions on Magnetics, vol. 60, no. 9, pp. 1-6, Sept. 2024, Art no. 8204006, doi: 10.1109/TMAG.2024.3429178.
A. Mohammad-Alikhani, B. Nahid-Mobarakeh and M. -F. Hsieh, "One-Dimensional LSTM-Regulated Deep Residual Network for Data-Driven Fault Detection in Electric Machines," in IEEE Transactions on Industrial Electronics, vol. 71, no. 3, pp. 3083-3092, March 2024, doi: 10.1109/TIE.2023.3265054.
D. -C. Hsiao and M. -F. Hsieh, "Integrated Design and Power Loss Minimization of Reaction Wheel Motor for Satellite Attitude Control," in IEEE Transactions on Industry Applications, vol. 59, no. 3, pp. 3291-3299, May-June 2023, doi: 10.1109/TIA.2023.3249149.
A. Mohammad-Alikhani, B. Nahid-Mobarakeh and M. -F. Hsieh, "One-Dimensional LSTM-Regulated Deep Residual Network for Data-Driven Fault Detection in Electric Machines," in IEEE Transactions on Industrial Electronics, vol. 71, no. 3, pp. 3083-3092, March 2024, doi: 10.1109/TIE.2023.3265054.
T. -A. Huynh, Y. -T. Nguyen Le, Z. Lee, M. -C. Tsai, P. -W. Huang and M. -F. Hsieh, "Influence of Flux Barriers and Permanent Magnet Arrangements on Performance of High-Speed Flux-Intensifying IPM Motor," in IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-6, Nov. 2023, Art no. 8203606, doi: 10.1109/TMAG.2023.3290538.
D. -C. Hsiao and M. -F. Hsieh, "Design and Implementation of Novel Homopolar Magnetic Bearings Incorporated in Reaction Wheel for Satellite Attitude Control," in IEEE Access, vol. 11, pp. 66374-66381, 2023, doi: 10.1109/ACCESS.2023.3290308.
Hsu H-Y, Lo T-Y, Hsieh M-F. A simple signal extraction-based online real-time diagnosis approach for interturn short-circuit fault of permanent magnet motor. Int J Circ Theor Appl. 2023; 51(7): 3246-3262. doi:10.1002/cta.3589
M. -F. Hsieh, C. -Y. Chang, T. -A. Huynh and D. G. Dorrell, "Design and Analysis of Consequent-Pole Permanent Magnet Vernier Motor With Cancellation of Even-Order Harmonics," in IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-6, Nov. 2023, Art no. 8204406, doi: 10.1109/TMAG.2023.3293268.
H. -Y. Hsu and M. -F. Hsieh, "A Simple Search Coil Based on Motor Winding Strands for Rotor Position Estimation," in IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-10, 2023, Art no. 7505210, doi: 10.1109/TIM.2023.3302369.
M. -F. Hsieh, L. -H. Lin, T. -A. Huynh and D. Dorrell, "Development of Machine Learning-Based Design Platform for Permanent Magnet Synchronous Motor Toward Simulation Free," in IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1-5, Nov. 2023, Art no. 8205705, doi: 10.1109/TMAG.2023.3309151.
Hsieh, Min-Fu, Duc-Kien Ngo, and Nguyen Gia Minh Thao. "Flux intensifying feature of permanent magnet assisted synchronous reluctance motor with high torque density." Electronics 11.3 (2022): 397.
Ton, That-Dong, and Min-Fu Hsieh. "A Deadbeat Current and Flux Vector Control for IPMSM Drive with High Dynamic Performance." Applied Sciences 12.8 (2022): 3789.
K. -J. Shih, M. -F. Hsieh, B. -J. Chen and S. -F. Huang, "Machine Learning for Inter-Turn Short-Circuit Fault Diagnosis in Permanent Magnet Synchronous Motors," in IEEE Transactions on Magnetics, vol. 58, no. 8, pp. 1-7, Aug. 2022, Art no. 8204307, doi: 10.1109/TMAG.2022.3169173.
Wu, Pey Shey, et al. "Thermal Performance Improvement by Rotating Thermosyphon Loop in Rotor of an Interior Permanent Magnet Synchronous Electric Motor." Inventions 7.2 (2022): 37.
Lee, Yin-Hui, and Min-Fu Hsieh. "Swiveling Magnetization for Anisotropic Magnets for Variable Flux Spoke-Type Permanent Magnet Motor Applied to Electric Vehicles." Energies 15.10 (2022): 3825.
T. -A. Huynh, P. -H. Chen and M. -F. Hsieh, "Analysis and Comparison of Operational Characteristics of Electric Vehicle Traction Units Combining Two Different Types of Motors," in IEEE Transactions on Vehicular Technology, vol. 71, no. 6, pp. 5727-5742, June 2022, doi: 10.1109/TVT.2022.3179868.
Y. -H. Lee, M. F. Hsieh and P. -H. Chen, "A Novel Variable Flux Spoke Type Permanent Magnet Motor With Swiveling Magnetization for Electric Vehicles," in IEEE Access, vol. 10, pp. 62194-62209, 2022, doi: 10.1109/ACCESS.2022.3182115.
T. -A. Huynh, V. -H. Che and M. -F. Hsieh, "Maximization of High-Efficiency Operating Range of Spoke-Type PM E-Bike Motor by Optimization Through New Motor Constant," in IEEE Transactions on Industry Applications, vol. 59, no. 2, pp. 1328-1339, March-April 2023, doi: 10.1109/TIA.2022.3205571.
T. -D. Ton, M.-F. Hsieh* and P. -H. Chen, "A Novel Robust Sensorless Technique for Field-Oriented Control Drive of Permanent Magnet Synchronous Motor," IEEE Access, vol. 9, pp. 100882-100894, Jul. 2021.
M.-F. Hsieh*, P.-H. Chen, F.-S. Pai, R.-Y. Weng, "Development of Supercapacitor-Aided Hybrid Energy Storage System to Enhance Battery Life Cycle of Electric Vehicles," Sustainability , vol. 13 , no. 14, pp. 7682, Jul. 2021.
D. -K. Ngo, M. -F. Hsieh* and T.-D. Le, "Analysis on Field Weakening of Flux Intensifying Synchronous Motor Considering PM Dimension and Armature Current," IEEE Transactions on Magnetics, vol. 57, no. 2, pp. 1-5, Feb. 2021.
T. A. Huynh and M. -F. Hsieh*, "Improvement of Traction Motor Performance for Electric Vehicles Using Conductors With Insulation of High Thermal Conductivity Considering Cooling Methods," IEEE Transactions on Magnetics, vol. 57, no. 2, pp. 1-5, Feb. 2021
F. S. Pai, Y. Z. Huang, P. H. Chen, and M. F. Hsieh, “Operating efficiency enhancement of hybrid energy storage system for IPMSM drives,” International Journal of Electronics, 2021, doi: 10.1080/00207217.2020.1870734.
T. A. Huynh, J. X. Peng, M. F. Hsieh, and P. W. Huang, “Anti-Demagnetization Analysis of Fractional Slot Concentrated Windings Interior Permanent Magnet Motor Considering Effect of Rotor Design Parameters,” IEEE Transactions on Magnetics, 2021, doi: 10.1109/TMAG.2021.3090319.
S.-W. Chang, M.-F. Hsieh, W.-L. Cai, H.-D. Shen, "Detailed heat transfer measurements of impinging swirling and non-swirling jet arrays emitted from grooved orifice plate," Chemical Engineering and Processing-Process Intensification、vol. 149, Mar. 2020.
M.-F. Hsieh*, Y.-C. Weng, "A Low Torque Ripple Direct Torque Control Method for Interior Permanent Magnet Motor," Applied Sciences , vol.10, no 5, pp. 1723, Mar. 2020.
T. D. Ton, N. C. Chen, and M. F. Hsieh, “Analysis of switching frequency on performance of motor drive based on silicon carbide mosfet,” International Journal of Electrical Engineering, vol. 27, no. 6, 2020, doi: 10.6329/CIEE.202012_27(6).0003.
P. S. Wu et al., “Heat transfer and thermal management of interior permanent magnet synchronous electric motor,” Inventions, vol. 4, no. 4, 2019, doi: 10.3390/inventions4040069.
T. A. Huynh and M. F. Hsieh, “Irreversible demagnetization analysis for multilayer magnets of permanent magnet-assisted synchronous reluctance machines considering current phase angle,” IEEE Transactions on Magnetics, vol. 55, no. 7, 2019, doi: 10.1109/TMAG.2019.2911867.
D. K. Ngo and M. F. Hsieh, “Performance analysis of synchronous reluctance motor with limited amount of permanent magnet,” Energies, vol. 12, no. 18, 2019, doi: 10.3390/en12183504.
D. K. Ngo, M. F. Hsieh, and T. A. Huynh, “Torque Enhancement for a Novel Flux Intensifying PMa-SynRM Using Surface-Inset Permanent Magnet,” IEEE Transactions on Magnetics, vol. 55, no. 7, 2019, doi: 10.1109/TMAG.2019.2897022.
M. S. Wang, M. F. Hsieh, and H. Y. Lin, “Operational improvement of interior permanent magnet synchronous motor using fuzzy field-weakening control,” Electronics (Switzerland), vol. 7, no. 12, 2018, doi: 10.3390/electronics7120452.
T. A. Huynh, M. F. Hsieh, K. J. Shih, and H. F. Kuo, “An Investigation into the Effect of PM Arrangements on PMa-SynRM Performance,” IEEE Transactions on Industry Applications, vol. 54, no. 6, 2018, doi: 10.1109/TIA.2018.2853042.
T. A. Huynh and M. F. Hsieh, “Performance analysis of permanent magnet motors for electric vehicles (EV) traction considering driving cycles,” Energies, vol. 11, no. 6, 2018, doi: 10.3390/en11061385.
M. S. Wang, M. F. Hsieh, Y. S. Kung, and G. T. Lin, “Maximum torque per ampere control of IPMSM drive by fuzzy logic,” Microsystem Technologies, vol. 24, no. 1, 2018, doi: 10.1007/s00542-016-3119-5.
M. S. Wang, M. F. Hsieh, I. N. Syamsiana, and W. C. Fang, “Fuzzy maximum torque per ampere and maximum torque per voltage control of interior permanent magnet synchronous motor drive,” Sensors and Materials, vol. 29, no. 4, 2017, doi: 10.18494/SAM.2017.1528.
C. H. Hsu, Y. M. Huang, M. F. Hsieh, C. M. Fu, S. Adireddy, and D. B. Chrisey, “Transformer sound level caused by core magnetostriction and winding stress displacement variation,” AIP Advances, vol. 7, no. 5, 2017, doi: 10.1063/1.4978759.
T. A. Huynh and M. F. Hsieh, “Comparative Study of PM-Assisted SynRM and IPMSM on Constant Power Speed Range for EV Applications,” IEEE Transactions on Magnetics, vol. 53, no. 11, 2017, doi: 10.1109/TMAG.2017.2707125.
C. U. Ubadigha, M. C. Tsai, and M. F. Hsieh, “Modulating Ring Structural Configuration Influence on the Dual Air-Gap Magnetic Gear Electric Machine,” IEEE Transactions on Magnetics, vol. 53, no. 11, 2017, doi: 10.1109/TMAG.2017.2718111.
F. S. Pai, M. F. Hsieh, and Y. P. Wang, “Cumulative current-magnetizing method for a capacitor-discharged impulse magnetizer,” International Journal of Circuit Theory and Applications, vol. 45, no. 10. 2017. doi: 10.1002/cta.2341.
T. A. Huynh and M. F. Hsieh, “Performance evaluation of interior permanent magnet motors using thin electrical steels,” IEEJ Journal of Industry Applications, vol. 6, no. 6, 2017, doi: 10.1541/ieejjia.6.422.
D. G. Dorrell, J. K. H. Shek, and M. F. Hsieh, “The development of an indexing method for the comparison of unbalanced magnetic pull in electrical machines,” IEEE Transactions on Industry Applications, vol. 52, no. 1, 2016, doi: 10.1109/TIA.2015.2466554.
M. F. Hsieh, Y. H. Chang, and D. G. Dorrell, “Design and Analysis of Brushless Doubly Fed Reluctance Machine for Renewable Energy Applications,” IEEE Transactions on Magnetics, vol. 52, no. 7, 2016, doi: 10.1109/TMAG.2016.2537140.
S. Wang, D. G. Dorrell, Y. Guo, and M. F. Hsieh, “Inductive Charging Coupler with Assistive Coils,” IEEE Transactions on Magnetics, vol. 52, no. 7, 2016, doi: 10.1109/TMAG.2016.2539340.
I.-H. Lin, M.-F. Hsieh*, H.-F. Kuo and M.-C. Tsai, “Improved Accuracy for Performance Evaluation of Synchronous Reluctance Motor,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8113404, 2015. (SCI) (MOST 103-2622-E-006-037)
C.-C. Chiang, M.-F. Hsieh*, Y.-H. Li and M.-C. Tsai, “Impact of Electrical Steel Punching Process on the Performance of Switched Reluctance Motors,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8113304, 2015. (SCI) (MOST 103-2622-E-006-037)
C.-H. Hsu, M.-F. Hsieh, C.-M. Fu and Y.-M. Huang, “Effects of Multicore Structure on Magnetic Losses and Magnetomechanical Vibration at High Frequencies,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8402704, 2015. (SCI)
C.-H. Hsu, S.-L. Lee, C.-C. Lin, C.-S. Liu, S.-Y. Chang, M.-F. Hsieh*, Y.-M. Huang and C.-M Fu. “Reduction of Vibration and Sound-Level for a Single-Phase Power Transformer With Large Capacity,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8403204, 2015. (SCI)
M.-F. Hsieh, C.-H. Hsu, C.-M. Fu and Y.-M. Huang, “Design of Transformer With High-Permeability Ferromagnetic Core and Strengthened Windings for Short-Circuit Condition,” IEEE Transactions on Magnetics, vol. 51, no. 11, 8403304, 2015. (SCI)
M. Eftekhari, M. Moallem, S. Sadri and M.-F. Hsieh, “Online Detection of Induction Motor's Stator Winding Short-Circuit Faults,” IEEE Systems Journal, vol. 8, no. 4, 1272-1282, 2014. (SCI)
C.-C. Chiang, A.M. Knight, M.-F. Hsieh, M.-G. Tsai, B. H. Liu, I.-G. Chen, Z.-L. Gaing and M.-C. Tsai, “Effects of Annealing on Magnetic Properties of Electrical Steel and Performances of SRM After Punching,” IEEE Transactions on Magnetics, vol. 50, no. 11, 8203904, 2014. (SCI) (MOST 102-2622-E-006-032)
M.-F. Hsieh*, I.-H. Lin and D.G. Dorrell, “An Analytical Method Combining Equivalent Circuit and Magnetic Circuit for BDFRG,” IEEE Transactions on Magnetics, vol. 50, no. 11, 8206605, 2014. (SCI) (MOST 101-2628-E-006-016-MY3)
Z.-L. Gaing, Y.-Y. Hsiah, M.-C. Tsai, M.-F. Hsieh and M.-H. Tsai, “Rigorous Design of a Switched Reluctance Motor Using a Hybrid Design Model,” Journal of International Conference on Electrical Machines and Systems, vol. 3, no. 3, 256-263, 2014. (EI) (MOST 101-2221-E-244-011)
M.-F. Hsieh*, D.G. Dorrell, C.-K. Lin, P.-T. Chen and P.Y.P. Wung, “Modeling and Effects of In Situ Magnetization of Isotropic Ferrite Magnet Motors,” IEEE Transactions on Industry Applications, vol. 50, no. 1, 364-374, 2014. (SCI).
Z.-L. Gaing, C.-H. Lin, M.-H. Tsai, M.-F. Hsieh and M.-C. Tsai, “Rigorous Design and Optimization of Brushless PM Motor Using Response Surface Methodology with Quantum-Behaved PSO Operator,” IEEE Transactions on Magnetics, vol. 50, no. 1, 4002704, 2014. (SCI) (MOEA 100-EC-17-A-05-S1-192)
M. Eftekhari, M. Moallem, S. Sadri and M.-F. Hsieh, “A Novel Indicator of Stator Winding Inter-turn Fault in Induction Motor Using Infrared Thermal Imaging,” Infrared Physics & Technology, vol. 61, pp. 330-336, 2013. (SCI).
D. G. Dorrell, J. K. H. Shek, M. A. Mueller and M.-F. Hsieh, “Damper Windings in Induction Machines for Reduction of Unbalanced Magnetic Pull and Bearing Wear,” IEEE Transactions on Industry Applications, vol. 49, no. 5, pp. 2206-2216, 2013. (SCI).
M.-F. Hsieh*, Y.-C. Hsu, D. G. Dorrell and P.-T. Chen, “Evaluation of Permanent Magnet Generator Manufactured Using Post-Assembly Magnetization,” IEEE Transactions on Magnetics, vol. 49, no. 7, pp. 4084-4087, 2013. (SCI) (NSC 101-3113-E-006-003)
M.-F. Hsieh* and Y.-H. Yeh, “Rotor Eccentricity Effect on Cogging Torque of PM Generators for Small Wind Turbines,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 1897-1990, 2013. (SCI) (MOST 101-3113-E-006-003)
M.-F. Hsieh*, C.-K. Lin and I.-H. Lin, “Design and Analysis of High Temperature Superconducting Generator for Offshore Wind Turbines,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 1881-1884, 2013. (SCI).
M.-F. Hsieh*, I.-H. Lin and D. G. Dorrell, “Magnetic Circuit Modeling of Brushless Doubly-Fed Machines with Induction and Reluctance Rotors,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2359-2362, 2013. (SCI) (MOST 101-2628-E-006-016-MY3)
M.-F. Hsieh*, Y.-C. Hsu and P.-T. Chen, “Analysis and Experimental Study of Permanent Magnet Machines with In-situ Magnetization,” IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2351-2354, 2013. (SCI) (MOST 101-3113-E-006-003)
M.-F. Hsieh* and W.-C. Chang, “Combining Full and Semi Closed Loop Synchronous Control for Dual Mechanically Coupled Ball Screw System,” International Journal of Computer Applications in Technology, vol. 45, no. 2/3, pp. 139-147, 2012. (EI) (MOST 98-2815-C-006-045-E)
M.-F. Hsieh* and Y.-H. Yeh, “The Integrated Design of a Permanent-magnet Generator for Small Wind Energy Conversion System,” International Journal of Computer Applications in Technology, vol. 45, no. 2/3, pp. 98-105, 2012. (EI) (MOST 98-3114-E-006-011)
M.-F Hsieh*, I.-H. Lin, Y.-C. Hsu and R.A. McMahon, “Design of Brushless Doubly-Fed Machines Based on Magnetic Circuit Modeling,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 3017–3020, 2012. (SCI) (MOST 100-2918-I-006-019)
M.-F. Hsieh*, F.-S. Hsu, and D.G. Dorrell, “Winding Changeover Permanent-Magnet Generators for Renewable Energy Applications,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 4168-4171, 2012. (SCI) (MOST 98-2623-E-006-001-ET)
M.-F. Hsieh*, W.-S. Yao and C.-H. Hsu, “Modeling and Control of a Feed Drive with Multiple Mechanically Coupled Ball Screws,” Asian Journal of Control, vol. 14, no. 5, pp. 1227-1238, 2012. (SCI).
M.-F. Hsieh*, I.-H. Lin, D.G. Dorrell, M.-J. Hsieh and C.-C. Lin, “Development of a Wave Energy Converter Using a Two Chamber Oscillating Water Column,” IEEE Transactions on Sustainable Energy, vol. 3, no. 3, pp. 482–497, 2012. (SCI) (NSC100-2221-E-006-015, NSC 99-ET-E-006-007-ET)
Y.-H. Yeh, M.-F. Hsieh* and D.G. Dorrell, “Different Arrangements for Dual-Rotor Dual-Output Radial-Flux Motors,” IEEE Transactions on Industry Applications, vol. 48, no. 2, pp. 612-622, 2012. (SCI)
D.G. Dorrell, M.-F. Hsieh and A.M. Knight, “Alternative Rotor Designs for High Performance Brushless Permanent Magnet Machines for Hybrid Electric Vehicles,” IEEE Transactions on Magnetics, vol. 48, no. 2, pp. 835-838, 2012. (SCI)
M.-F. Hsieh* and Y.-C. Hsu, “A Generalized Magnetic Circuit Modeling Approach for Design of Surface Permanent-Magnet Machines,” IEEE Transactions on Industrial Electronics, vol. 59, no. 2, pp. 779-792, 2012. (SCI)
M.-F. Hsieh*, Y.-M. Lien and D.G. Dorrell, “Post-Assembly Magnetization of Rare-Earth Fractional-Slot Surface Permanent-Magnet Machines Using a Two-Shot Method,” IEEE Transactions on Industry Applications, vol. 47, no. 6, pp. 2478-2486, 2011. (SCI)
D.G. Dorrell, J. Shek, M.-F. Hsieh* and M.A. Mueller, “Unbalanced Magnetic Pull in Cage Induction Machines for Fixed-Speed Renewable Energy Generators,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 4096-4099, 2011. (SCI)
Y.-S. Hsu, M.-C. Tsai and M.-F. Hsieh, “Sub-assembly Magnetization Strategies for a Transverse Flux Motor Equipped with Multiple NdFeB Magnet,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 3681-3684, 2011. (SCI) (MOEA 99-EC-17-A-05-S1-103)
D. G. Dorrell, M.-F. Hsieh, M. Popescu, L. Evans, D. A. Staton and V. Grout, “A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent Magnet Motors,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 3741-3757, 2011. (SCI).
D. G. Dorrell, M. F. Hsieh and C. C. Lin, “A Multichamber Oscillating Water Column using Cascaded Savonius Turbines,” IEEE Transactions on Industry Applications, vol. 46, no. 6, pp. 2372-2380, 2010. (SCI)
Min-Fu Hsieh*, Hung-Ju Liao, “A Wide Speed Range Sensorless Control Technique of Brushless DC Motors for Electric Propulsors,” Journal of Marine Science and Technology, vol. 18, no 5, pp. 735-745, 2010. (SCI) (NSC 95-2221-E-006-471)
Min-Fu Hsieh*, You-Chiuan Hsu, David G. Dorrell, “Design of Large Power Surface-Mounted Permanent-Magnet Motors Using Post-Assembly Magnetization,” IEEE Transactions on Industrial Electronics, vol. 57, no. 10, pp. 3376-3384, 2010. (SCI)
David G. Dorrell, Min-Fu Hsieh and Chi-Chien Lin, “A Small Segmented Oscillating Water Column using a Savonius Rotor Turbine,” IEEE Transactions on Industry Applications, vol. 46, no. 5, pp. 2080-2088, 2010. (SCI)
D.G. Dorrell and M.-F. Hsieh, “Calculation of Radial Forces in Cage Induction Motors at Start - the Effect of Rotor Differential,” IEEE Transactions on Magnetics, vol. 46, no. 8, pp. 3029-3032, 2010. (SCI)
David G. Dorrell, Min-Fu Hsieh, Youguang Guo, “Unbalanced Magnet Pull in Large Brushless Rare-Earth Permanent Magnet Motors With Rotor Eccentricity,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4586-4589, 2009. (SCI)
M.F. Hsieh* and K.H. Hu, "Analysis of a Tubular Linear Motor with Soft Magnetic Composites for Reciprocating Compressors," Journal of Applied Physics, vol. 103, 07F 112, 2008. (SCI)
Y.S. Hsu, M.C. Tsai and M.F. Hsieh, "Novel Stator Design of Fan Motors Using Soft Magnetic Composites," Journal of Applied Physics, vol. 103, 07F 109, 2008. (SCI)
M.F. Hsieh*, C.J. Tung, W.S. Yao, M.C. Wu and Y.S. Liao, “Servo Design of a Vertical Axis Drive Using Dual Linear Motors for High Speed Electric Discharge Machining,” International Journal of Machine Tools and Manufacture, vol. 47, no. 3-4, pp. 546-554, 2007. (SCI) (NSC92-2213-E-006-095)
M.F. Hsieh* and Y.C. Hsu, “Characteristics Regulation for Manufacture of Permanent-Magnet Motors Using Post-Assembly Magnetization,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2510-2512, 2007. (SCI) (NSC 95-2221-E-006-471)
M.F. Hsieh*, Y.C. Hsu, D.G. Dorrell and K.H. Hu, “Investigation on End Winding Inductance in Motor Stator Windings,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2513-2515, 2007. (SCI) (NSC 95-ET-7-006-008-ET)
D.G. Dorrell, M.F. Hsieh and Y.C. Hsu, “Post Assembly Magnetization Patterns in Rare Earth Permanent Magnet Motors,” IEEE Transactions on Magnetics, vol. 43, no. 6, pp. 2489-2491, 2007. (SCI)
M.F. Hsieh*, W.S. Yao and C.R. Chiang, “Modeling and Synchronous Control of a Single-Axis Stage Driven by Dual Mechanically-Coupled Parallel Ball Screws,” The International Journal of Advanced Manufacturing Technology, vol. 34, no.9-10, pp. 933-943, 2007. (SCI)
M.F. Hsieh*, Y.C. Lai, A. Horng and M.C. Tsai, “An Efficient Approach for Cogging Torque Analysis of Motors with Three-Dimensional Flux Distribution,” IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3464-3466, 2006. (SCI)
M.F. Hsieh* and Y.S. Hsu, “An Investigation on Influence of Magnet Arc Shaping upon Back Electromotive Force Waveforms for Design of Permanent-Magnet Brushless Motors,” IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3949–3951, 2005. (SCI) (NSC 93-2611-E-006-020)
M.C. Tsai, M.H. Weng and M.F. Hsieh, “Computer-Aided Design and Analysis of a Novel Fan Motor,” IEEE Transactions on Magnetics, vol. 38, no. 5, pp. 3467-3474, 2002. (SCI)
M.F. Hsieh, D.N. Moreton, J. Mistry and D.G. Moffat, “Limit Loads for Knuckle-encroaching Nozzles in Torispherical Heads: Experimental Verification of FE Predictions,” Journal of Strain Analysis, vol. 37, no. 4, pp. 313-326, 2002. (SCI)
D.G. Moffat, M.F. Hsieh and M. Lynch, “An Assessment of ASME III and CEN TC54 Methods of Determining Plastic and Limit Loads for Pressure System Components,” Journal of Strain Analysis, vol. 36, no. 3, 2001. (SCI)
M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Limit Load Interaction under Combined Pressure and Piping Loads,” International Journal of Pressure Vessels and piping, vol. 77, pp. 807-815, 2001. (SCI)
M.F. Hsieh, D.G. Moffat and J. Mistry, “Nozzles in the Knuckle Region of a Torispherical Head: Stress Levels and Load Interaction Effects,” Journal of Process Mechanical Engineering (Proceedings of the Institution of Mechanical Engineers Part E), vol. 214, pp. 31-41, 2000. (SCI)
M.-C. Tsai, C.-C. Chou and M.-F. Hsieh, "Development of a real-time servo control test bench," IEEE Transactions on Education, vol. 40, no. 4, pp. 242-252, 1997. (SCI)