Embedded Files
Introduction to EV3 RoboCup Soccer from RoboCup Australia: Programming soccer.pdf RoboCup soccer rules 2026.pdf
Building an EV3 soccer robot
Building an EV3 soccer robot
Robots can easily be tipped over so build them so they have a low centre of gravity.
Include a Infrared Sensor. Compass Sensor is not required for Simple Simon.
The robot must be a maximum of 1kg and fit within a 22cm cylinder size limit.
Goalie robots should be built in a manner that the cross bar prevents them from going behind the goal line.
The ball cannot be held underneath a robot, i.e. no part of a robot can protrude over more 30 mm of the ball’s projected diameter.
The use of a rotating drum or wheel that imparts dynamic backspin on the ball to keep the ball on its surface, called a "dribbler", is not allowed. Flippers are also not allowed.
You can include these blocks in your program if you want to have the sensor readings display on your screen.
You can include these blocks in your program if you want to have the sensor readings display on your screen.
Report abuse