Embedded Files
The Gripper Building Kit for Dash is an easy-to-construct set of functioning arms that expands your robots' capabilities. Build the mechanical arms for hands-on learning of gears, levers, and axles. Master more robotics skills by simulating real-world object detection and manipulation using your robots' sensors and motors through code or manual remote control. The Gripper arms will lift, carry, pull, pick up, and place a variety of lightweight objects for endless play and DIY challenges.
All the parts for the gripper kit are Lego Technic bits (that we own).
You will also need to use 3 X dash connectors.
Gripper_Assembly_Building_Kit.pdfTips & Tricks
Tips & Tricks
Check these three things on your Gripper and you’re ready to play!
1. Make sure the Building Brick Connectors are snapped into place.
2. Align the gears so that the arms are straight.
3. Check that the linkage is connected to the right spot.
Customize Your Grip:
Rotate the rubber tips 90° to better grip something thin like paper.
The gripper can be coded in Dash Blockly or Wonder apps. The gripper is coded as an accessory.
Gripper_Play_Tips-1.pdf
Report abuse