CAD Drawings

Annotated Part Drawing 1

(add additional drawings if needed for more parts)

Assembly Drawing

If your project has more than one part, include an assembly drawing with parts list.

CAD Assembly Video

Add your assembly video to YouTube and add the YouTube video below

Mock-Up Images

Show from three Angles Front, Top Side

Testable Parameters *

• Speed - We need it to do the sorting as fast as possible

• Accuracy - we want to make sure that everything is going where it is supposed to go 100% of the time.

• Easy of construction- we want a design that can be easily changed while we're working on it, because there will be many kinks we'll have to work out

Final Build Procedures Overview *

1. Build the original plan using vex pieces; our original plan had two motors and would allow the arm to rotate on the x-axis and the y-axis.

2. Make any modifications that need to be made.

3. Code the prototype

4. test if the design is up to par

5. make any changes that need to be made

6. work on getting it manufactured

Resource Planning

• Plan on only using a vex kit for now, but in future we'd like to prototype with machined metal components

Build Modifications

• We wanted to use bevel gears to create the rotation on the x- and y- axis, but we did not have any in our vex kit. This means that it would be very difficult to get the rotation. We changed it, so there are two levels of platforms

Testing Data

Construction Photos

Final Prototype