Assist. Prof. Dr. Chonlakarn Wongkhorsub
Education
2001-2005
PhD in Renewable Energy
School of the Built Environment, University of Nottingham, England
PhD Study: A combined technology, PEM fuel cell system with ejector heat pump system.
Research area involved the design and construction of a new refrigerant ejector system (HFE7100). Research included, achieving a new environmentally refrigerant for the heat pump system, applying CFD computer modeling to investigate the flow behavior of the ejector with a new refrigerant, and utilizing the by-product waste heat from PEM fuel cell to initiative the ejector heat pump system.
2000-2001
Msc. Renewable energy and Architecture
School of the Built Environment, University of Nottingham, England
Modules include:
Renewable Energy Technology
Ventilation in Building
Energy Efficient System
Solar Architecture
Dissertation Project: A computer programme for the simulation of natural ventilation performance of buildings, employing an integrated wind pressure database.
1998-2000
BEng(Hons) Mechanical Engineering
School of Mechanical Materials and Manufacturing, University of Nottingham, England
1996-1998
BEng Mechanical Engineering
Thammasat University, Thailand
WORK EXPERIENCE
January 2006- January 2007
National Innovation Agency, Thailand
Job Title: Project Coordinator in Renewable Energy Projects
Project Manager in Renewable Energy Projects
Responsibilities:
Initiate potential project innovation in Renewable energy area
Match making between business section and academic section
Develop business model of the project
Develop feasibility analysis of the project
Present the project to board of committee
Write articles for “Innovation link”
February 2007 – May 2011
Kang Yong Group, Thailand
Job title: Assistant of Business Development Manager
Engineering Manager, Energy Section
Responsibilities:
Main responsibility in Gasification business
Study feasibility and potential of waste gasification in Thailand
Establish the gasification business in company
Study design and usage of waste gasification technology
Leader team of receiving technology transfer team from patented waste gasification owner
Leader team of design and manufacturing prototype waste gasification
Establish the Angthong waste management project.
Study feasibility of waste management projects
Publish the basic knowledge and environmental understanding to stakeholders which are government section, local section, private investment and people in the area
Prepare the project to be applicable with CDM
Design the waste management system
June 2011- Jun 2015
Rajamangala University of Technology Phra Nakorn
Job title: Assistance Professor
Responsibilities:
Lecture on “Engineering Mechanics”, “Machine Design”, and “Thermodynamics.
Research on Waste to energy oil, (pyrolysis oil from tyre and plastic)
Assistant in International Affair section of Engineering Department
July 2015- Now
Mongkut’s University of Technology North Bangkok
Job title: Assistance Professor
Responsibilities:
Lecture on “Thermodynamics, Energy and Environmental Management, Automotive Business Operation and Ethanol Technology””
Advisor for Master Degree student
Research on Waste to energy oil, (pyrolysis oil from tyre and plastic)
Experiences
Jan 2008-June 2008
National Housing Authority: A key speaker for Training in the implementation of Government Housing project in communities programme in “ Waste management in community” topic.
19 February 2010
The Engineering Institute of Thailand: A speaker in Energy Saving and Construction 2010 conference in “Energy from waste” topic.
18 September 2010
Entech 2010: A speaker for senator’s board of commission in Entech 2010 conference in “Turn Waste to Energy” topic.
January 2011-January 2012
Energy Department, Thailand: Academic consultant in surveying the potential of waste in industrial section.
October 2011-Now
Energy Department, Thailand: Academic consultant in Energy Cost Reduction Project for SMEs
October 2012-Now
Energy Department, Thailand: Consultant in Energy Efficiency Project for Large Buildings of Government.
October 2012-Now
National Food Institute, Thailand: Production planning consultant in “Thailand Food Forwards” project
Articles Published
ชลกาญจน์ วงศ์ก่อทรัพย์, อนุชา ครุฑธาพันธ์, กัมปนาท เทียนน้อย, ศีขรินทร์โกมลหิรัญ, สุนทร โอษฐ์งาม และ มงคล แดงสุนทรชัย "ผลกระทบของการปรับตั้งจังหวะการฉีดน้ำมันไพโรไลซิสจากพลาสติกผสมน้ำมันดีเซลที่มีต่อสมรรถนะและการปลดปล่อยมลพิษขอเครื่องยนต์ดีเซล" วารสารวิชาการเทคโนโลยีอุตสาหกรรม (The Journal of Industrial Technology), 2022, volume 18, issue 3.
Anucha Krutthaphan, Wantana Chaowasin, Kampanart Theinnoi, and Chonlakarn Wongkhorsub (2022) "Influence of Injection Timing on Performance, Combustion and Emission Characteristics from Diesel Engine Fueled with Diesel-plastic Pyrolysis Oil Blends" The Journal of King Mongkut's University of Technology North Bangkok, Vol 32, No 3 (2022): July-September.
Boonlue Sawatmongkhon, Kampanart Theinnoi, Thawatchai Wongchang, Chiewcharn Haoharn, Chonlakarn Wongkhorsub, and Ekarong Sukjit (2021) “Modelling of Hydrogen Production from Catalytic Partial Oxidation of Ethanol over a Platinum-Rhodium Supported Catalyst,” Energy & Fuels, 35, 4404-4417.
B. Sawatmongkhon, K. Theinnoi, T. Wongchang, C. Haoharn, C. Wongkhorsub, and A. Tsolakis (2019) “Hydrogen Production via the Catalytic Partial Oxidation of Ethanol on a Platinum–Rhodium Catalyst: Effect of the Oxygen-to-Ethanol Molar Ratio and the Addition of Steam,” Energy & Fuels, 33, 7, 6742-6753.
B. Sawatmongkhon, K. Theinnoi, T. Wongchang, C. Haoharn, C. Wongkhorsub, E. Sukjit, and A. Tsolakis (2019) “Catalytic oxidation of diesel particulate matter by using silver and ceria supported on alumina as the oxidation catalyst,” Applied Catalysis A: General, 574, 33-40.