Embedded Files
CNC Milling Operation
CNC Milling Operation
As part of my CTE Endorsement, I had pass my Haas Certification. In order to pass, I had to be able to tell specific criteria like pointing out parts of the CNC Milling Machine, to tell different commands on the dashboard. being able to load and unload a part from the machine, and run program in order to cut out a part from the machine.
Here is the part I cut using the CNC Mill to pass my Certification.
Demon Half Mask
Demon Half Mask
This is the first project I have done at the Brooklyn STEAM Center. Due to me being in school during Blended Learning for the 2021-2022 and the limited amount of people in the class at the time, we all made our own Halloween mask similar to the one I chose in the picture below.
Key Thing to Note
Key Thing to Note
First, you start with a paper like this. They are the print outs for the parts that need to be assembled together later on.
Key Thing to Note
Key Thing to Note
The yellow lines means score and the pink lines are cuts.
Photos of the Demon Half Mask
Photos of the Demon Half Mask
Left Side View
Front View
Right Side View
Bottom View
Big Takeaway
Big Takeaway
One thing I learned after during this project was able to to take up on new things and acknowlegde it's fine if you make mistakes sometimes. For example, I had to use tape on the mask to keep it together because I cut too deep on the paper. My mask isn't perfect but I have to be able to learn from my mistakes.
Top View
Page updated
Report abuse