Embedded Files
1. Parts
1. Parts
Your standard kit contains the following parts:
- one small green connector
- one axle with green attachment on the end
- one motor with cables
- one black rotor (consists of 3 pieces)
- one motor mount assembly with bolts (x2) and nuts (x4), and wing nuts (x2)
- one large green gear
- one blue plastic nacell
Return your kit complete and with all the parts
Return your kit complete and with all the parts
Replacement and additional parts are available from the design technician
Replacement and additional parts are available from the design technician
2. Assembly of the Turbine
2. Assembly of the Turbine
The wind turbine kit can be assembled as either a vertical or horizontal axis.
The standard kit comes with parts to assemble a horizontal axis wind turbine.
You will require an additional mounting kit to set up your turbine for a horizontal axis.
Horizontal Axis
Horizontal Axis
Standard Kit
Standard Kit
Watch the video to assemble correctly. You need to assembly this whether your design use a horizontal or vertical axis.
Vertical Axis
Vertical Axis
Add an extra motor mount (#4) to the nacel.
Add an extra motor mount (#4) to the nacel.
These are available from the Design department
3. Assembling the blade connector
3. Assembling the blade connector
The yellow fiberglass rod require a short silicone insert to make them fit into the rotor.
You do not need this insert if you are using wooden dowels
4. Disassembling your kit
4. Disassembling your kit
At the end of the inquiry, please disassemble your kit. Place all the parts in your box. Please ensure your kit box looks like the picture below:
Report abuse