Set dials so the current code (0000) is aligned with the red line and lift shackle

Turn shackle 90 degrees or a 1/4 turn

Press and hold shackle down

Set new combo by aligning new code to the red line

Close shackle and scramble dials to lock

Set code back to 0000 when you are done.

Set dials so the current code (LOCK) is aligned with the indicator line and lift shackle

Place a coin in the center slot in the bottom and turn to the reset position (circle to circle)

Set the dial so the new passcode is aligned with the indicators

Turn the center slot back to original position

Close shackle and scramble dials

Set dials to LOCK (when you are done)

Possible Combos

Set dials so the current code (WORDS) is aligned with the indicator line and lift shackle

Using a coin, turn the slot on the left side of the lock to RESET

Set dials to new word combination using the indicator line

Turn the slot on the left side of lock back to original position

Reinsert shackle into lock body

Reset to WORDS (when you are done)

Set dials so the current code (WORDS) is aligned with Master logo and lift shackle

Pull spring loaded metal end cap off

Remove all combination dials

IMPORTANT: Reinstall dials to make sure that all red marks align with Master logo

Snap metal cap back in place and mix up dials to lock

Please reset to WORDS when done

Possible combos

Enter the combination by sliding the button to each position in the combo pattern (L, L, R, R, L, L)

Be sure to slide the button to each position and then the center before moving to the next direction

Pull up on the shackle to open the lock

On the back of the lock, use something pointed to slide the reset lever into the "up-R" position

Insert the shackle into the lock and squeeze firmly twice to "clear" it

Pull up on the shackle and enter your new combination

Slide the reset lever back to "down" position and insert shackle into lock and squeeze firmly

Please reset to L, L, R, R, L, L when done

Set the code to 000 (zeroes)

Slide the button away from the number wheels and latch to open the lock

With the lock open, slide the button toward the number wheels and latch and hold it there

While holding the button firmly toward the number wheels, set the desired combination

Releases the button, close the lock by pushing the latch back into the slot

Please reset to 000 when done