Steps to Use Test software [Scanlite]

Step 1 : Connect CX30 /TS240 to the power supply and USB cable to the PC. LED indicator on CX30/TS240 will turn Red

Step 2 : Open the Test software [ScanLite2] from Desktop

Step 3 : Test software will automatically connect to the CX30/TS240, LED indicator on CX30/TS240 will turn Green once connected successfully and a new window will open in your PC.

Step 4 : Select the required Image type. Test one by one.

1. Grayscale : It Scans front & back side of the cheque in Grayscale.
2. Color : It Scans front & back side of the cheque in Color.
3. Gray-B/W : It scans front side of the cheque in both Grayscale & Black and White.
4. Color-B/W: It scans front side of the cheque in both Color & Black and White.
5. UV-B/W : It scans front side of the cheque in both UV & Black and White.

Step 5 : Select the required Options. Test one by one.

1. Endorse : It print a sample text one the backside of the Cheque [Endorsement].
2. Sort : Not used.
3. ScanBatch : It scans cheques in batch wise automatically with a single click. [Works only for TS240]
4. Frank : Not used.

Step 6 : Select the proper DoubleFeed option.

1. Off : It will not detect Double feed. Double feed is when the machine takes two cheques at a time accidentally.
2. Stop : Scanning will stop when Double feed is detected.
3. No Stop : Machine will continue to scan even when double feed is detected.

Step 6 : Click "Scan" button to scan the Cheque as per the selected options.

You can test the Machine in all modes and verify the same.

Other Options

1. Eject : In case of small Jamming, you can click on "Eject" button to eject the document.
2. Clean : Use this mode to clean the sensors with Cleaning card

This is how you can use the Test software to verify all its functions.