Steps to Check Ink Cartridge

Step 1 : Connect CX30 /TS240 to the power supply and USB cable to the PC. LED indicator on CX30/TS240 will turn Red

Step 2 : Open the Test software [ScanLite2] from Desktop

Step 3 : Test software will automatically connect to the CX30/TS240, LED indicator on CX30/TS240 will turn Green once connected successfully and a new window will open in your PC.

Step 4 : Select help from menu, Open Sensors tab.

Step 5 : If the Cartridge is installed properly, the radio button near Cartridge will be active.

Step 6 : If the radio button is deactivated, the Cartridge is not installed Properly, Hence remove the cartridge and insert properly again

Step 7 : Once the Radio button is active, the cartridge is ready to print, the select endorse section, and scan a document.

Step 8 : If the machine prints/endorse "BATCH 001" on back side of the check, the cartridge is working.

If nothing is printing the Cartridge ink is empty. Hence need to replaced.

If some part is not printing, then the cartr