Hands-On Syllabus

MJC Alternator/Generator Training Aid
MJC Combustion Heater Training Aid
MJC AVOTEK Deice/Anti-Ice Training Aid
MJC AVOTEK Electrical Training Aid
MJC AVOTEK Fire Detection Training Aid
MJC AVOTEK Hydraulic Training Aid
MJC Landing Gear/Wheel/Brake Fixed Gear Training Aid
MJC Landing Gear Retractable Training Aid
MJC AVOTEK Turbine Fuel System Training Aid
MJC Locate and Summarize
MJC Locate and Summarize 14 CFR Regulations
MJC Locate Type Certificate Data Sheets (TCDS)
MJC AM.I.A.S11 Measure voltage drop across a resistor.
MJC AM.I.A.S14 Service an aircraft battery.
MJC AM.I.C.S2 Perform weight and balance calculations.
MJC AM.I.D.S1 Fabricate a rigid line with a flare and a bend.
MJC AM.I.D.S7 Fabricate a flexible hose.
MJC AM.I.D.S8 Fabricate a flareless-fitting-tube connection.
MJC AM.I.E.S1 Install safety wire on nuts, bolts, and turnbuckles. (bolts)
MJC AM.I.E.S1 Install safety wire on nuts, bolts, and turnbuckles. (turnbuckles)
MJC AM.I.E.S3 Inspect and check welds.
MJC AM.I.E.S5 Select and install aircraft bolts.
MJC AM.I.E.S9 Fabricate a cable assembly using a swaged-end fitting.
MJC AM.I.F.S9 Follow a checklist to start up or shut down an aircraft reciprocating engine.
MJC AM.I.G.S3 Apply corrosion prevention/coating materials.
MJC AM.I.G.S10 Layout and mask a surface in preparation for painting.
MJC AM.I.H.S2 Compute the volume of a cylinder.
MJC AM.I.H.S4 Calculate the volume of a shape; such as a baggage compartment or fuel tank.
MJC AM.I.H.S5 Convert between fractional and decimal numbers.
MJC AM.I.I.S1 Complete a Form 337 and logbook entry for an STC Lithium Battery
MJC AM.I.I.S7 Complete an aircraft maintenance record entry for return to service.
MJC AM.I.I.S8 Determine applicability of an AD.
MJC AM.I.I.S15 Determine whether a given repair or alteration is major or minor.
MJC AM.I.I.S18 Complete a 100-hour inspection aircraft maintenance record entry.
MJC AM.I.J.S5 Demonstrate the mechanical advantage of various types of levers.
MJC AM.I.J.S8 Calculate horsepower.
MJC AM.II.A.S6 Prepare and install a patch to repair an aircraft or component.
MJC AM.II.A.S10 Fabricate an aluminum part in accordance with a drawing.
MJC AM.II.B.S6 Locate and explain the procedures for tying a modified seine knot.
MJC AM.II.C.S6 Adjust and secure a primary flight control cable.
MJC AM.II.C.S8 Check the balance of a flight control surface.
MJC AM.II.E.S8 Remove and replace brake linings
MJC AM.II.E.S9 Service landing gear air/oil shock strut.
MJC AM.II.E.S10 Bleed air from a hydraulic brake system.
MJC AM.II.E.S12 Remove, inspect, and install a wheel brake assembly.
MJC AM.II.E.S17 Service a nose-wheel shimmy damper.
MJC AM.II.E.S26 Remove, install, and adjust a landing gear down-lock switch.
MJC AM.II.F.S7 Service a hydraulic system accumulator.
MJC AM.II.F.S12 Remove and install a system pressure relief valve.
MJC AM.II.G.S3 Service an oxygen system.
MJC AM.II.H.S4 Determine barometric pressure using an altimeter.
MJC AM.II.I.S10 Inspect electronic equipment shock mount bonding jumpers for resistance.
MJC AM.II.J.S17 Remove and/or install a fuel quantity transmitter.
MJC AM.II.K.S2 Perform wire terminating and splicing.
MJC AM.II.K.S5 Solder aircraft wiring.
MJC AM.II.K.S8 Secure wire bundles.
MJC AM.II.K.S16 Troubleshoot a DC electrical system supplied by an AC electrical system.
MJC AM.II.K.S18 Perform a continuity test to verify the condition of a conductor
MJC AM.II.M.S2 Determine proper container pressure for an installed fire extinguisher system.
MJC AM.III.A.S2 Operate and troubleshoot reciprocating engine.
MJC AM.III.A.S4 Identify the parts of a cylinder.
MJC AM.III.A.S5 Identify the parts of a crankshaft.
MJC AM.III.A.S6 Identify and inspect various types of bearings.
MJC AM.III.A.S7 Inspect and rig cable and push-pull engine controls.
MJC AM.III.A.S8 Locate top dead-center position of number one cylinder.
MJC AM.III.A.S9 Install a cylinder on a horizontally-opposed engine.
MJC AM.III.B.S3 Identify components of turbine engines.
MJC AM.III.B.S4 Map airflow direction and pressure changes in turbine engines.
MJC AM.III.B.S5 Remove and install a fuel nozzle in a turbine engine.
MJC AM.III.C.S1 Perform a compression check on a cylinder.
MJC AM.III.D.S8 Perform resistance measurements of thermocouple indication system.
MJC AM.III.D.S12 Replace a cylinder head temperature thermocouple.
MJC AM.III.E.S4 Inspect fire detection thermal switch or thermocouple system.
MJC AM.III.G.S6 Inspect an oil filter or screen.
MJC AM.III.H.S2 Time magneto to engine.
MJC AM.III.H.S3 Remove, clean, and install spark plug.
MJC AM.III.H.S6 Inspect magneto breaker points.
MJC AM.III.I.S6 Inspect a carburetor fuel inlet screen.
MJC AM.III.J.S5 Service an induction air filter.
MJC AM.III.J.S19 Inspect cylinder cooling fins.
MJC AM.III.K.S1 Perform an induction and cooling system inspection.
MJC AM.III.L.S7 Perform a pressure leak check of a reciprocating engine exhaust system
MJC AM.III.M.S1 Remove and install a propeller.
MJC AM.III.M.S2 Check blade static tracking.
MJC AM.III.M.S4 Measure the propeller blade angle on a propeller.
MJC AM.III.M.S5 Perform a minor repair to a metal propeller blade using AC 20-37

Page updated

Report abuse