Publications

Books

I. Bruska Azhdar, “Improved high velocity cold compaction processing: Polymer to high performance parts.” ISSN 1652-2443, Sweden.2005

II. Bruska Azhdar, “Novel Technique to Improve High-Velocity Cold Compaction Processing of Polymer Powders and Polymer-Based Nanocomposite: High Performance Components.” ISBN 91-7178-459-4, Sweden.2006

Journal Papers

SELECTED RECENT PUBLICATIONS: (15 papers)

I. ‘Development of a High-Velocity Compaction process for polymer powders’

Bruska Azhdar, Bengt Stenberg, Leif Kari, Polymer Testing, 2005; 24(7): 909-919.

II. ‘Determination of springback gradient in the die on compacted polymer powders during high-velocity compaction’

Bruska Azhdar, Bengt Stenberg, Leif Kari, Polymer Testing, 2006; 25(1): 114-123.

III. ‘Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction’

Bruska Azhdar, Bengt Stenberg, Leif Kari, Polymer Testing, 2006; 25(8): 1069-1080.

IV. ‘Polymer-nanofiller prepared by high-energy ball milling and high velocity cold compaction’

Bruska Azhdar, Bengt Stenberg, Leif Kari, Polymer Composites, 2008; 29(3): 252-261.

V. ‘Long-term performance of poly(vinyl chloride) cables, Part 2: Migration of plasticizer’

Ekelund, M.; Azhdar, B.; Hedenqvist, M. S.; Gedde, U. W., Polymer Degradation and Stability (2008), 93, 1704-1710.

VI. ‘A new method for assessing the efficiency of stabilizers in polyolefins exposed to chlorinated water media’

Azhdar, B.; Yu, W.; Reitberger, T.; Gedde, U. W, Polymer Testing (2009), 28(6): 661-667.

VII. ‘Evaporative loss kinetics of di(2-ethylhexyl)phthalate (DEHP) from pristine DEHP and plasticized PVC’

Ekelund, M.; Azhdar, B.; Gedde, U. W., Polymer Degradation and Stability (2010), 95, 1789-1793.

VIII. ‘The Effect of Silanisation on Microstructural Stability and Magnetic Properties of the Intermetallic Sm2(Co, Fe, Cu, Zr)17’.

M. Qadeer, B. Azhdar, S. Savage., Materials Research Society, (2010) MRS.

IX. ‘Dielectric Properties of Alumina-filled poly(ethyleneco-butyl acrylate) Nanocomposites’.

N. Jäverberg, H. Edin, P. Nordell, H. Hillborg, B. Azhdar, U.W. Gedde, 2010 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, West Lafayette, USA, 2010.

X. ‘Deterioration of polyethylene pipes exposed to water containing chlorine dioxide’

W. Yu , B. Azhdar , D. Andersson , T. Reitberger , J. Hassinen , T. Hjertberg, Gedde, U.W ., Polymer Degradation and Stability (2011), 96, 790-797.

Thermodynamics

XI. ‘Simulation of high-velocity compaction process with relaxation assists using the

discrete element method’.

M. Shoaib, L. Kari, B. Azhdar., Powder Technology (2012), 217, 394–400.

XII. ‘Preparation and characterization of aluminum oxide–poly(ethylene-co-butyl acrylate) nanocomposites’

P. Nordell, S. Nawaz, B. Azhdar, H. Hillborg, U. W. Gedde., Journal of Applied Polymer Science (2012) 125, Issue 2, 975–983.

XIII. ‘Dielectric Properties of Alumina-filled Poly (ethylene-co-butyl acrylate) Nanocomposites Part I - Dry Studies’.

N. Jäverberg, H. Edin, P. Nordell, S. Nawaz, B. Azhdar and U. W. Gedde, IEEE Transactions on Dielectrics and Electrical Insulation, (2012) 19, No. 2, 383–390.

XIV. ‘Dielectric Properties of Alumina-filled Poly (ethylene-co-butyl acrylate) Nanocomposites Part II - Wet Studies’.

N. Jäverberg, H. Edin, P. Nordell, S. Nawaz, H. Hillborg, B. Azhdar and U. W. Gedde, IEEE Transactions on Dielectrics and Electrical Insulation, (2012) 19, No. 2, 391–399.

XV. ‘Effect of Temperature on Structural and Electrical Properties of Bismuth Ferrite Nanoparticles Prepared By Sol Gel Method’.

Tahseen H Mubarak, Bruska Azhdar, Karim H Hassan and Chia H Kareem, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), (2014) 3, Issue 10, 17034–17041.

SELECTED RECENT POPULAR ARTICLES: (1 paper)

  • ‘Adiabatisk formning: Forskare vid KTH slår ett slag för ny formningsteknik’. Azhdar, B., et al., PLASTFORUM, 2005(4): p. 47-49.