Simple vibrating mini motor disc example

Simple Arduino example to buzz every second.

Components

• 1 x vibrating mini motor disc

  • 1 x Arduino Uno

  • 1 x breadboard

  • alligator clips

  • jumper wires

Setup

Use alligator clips to connect:

• blue to jumper wire to GND

• red to jumper wire to pin 13

Arduino sketch

This is just the blink example.

/*

  Blink

  Turns on an vibrating mini motor disc 

  on for one second, then off for one second, repeatedly.

  This example code is in the public domain.

 */

// Pin 13 has an mini motor disc connected on most Arduino boards.

// give it a name:

int buzzPin = 13;

// the setup routine runs once when you press reset:

void setup() {                

  // initialize the digital pin as an output.

  pinMode(buzzPin, OUTPUT);     

}

// the loop routine runs over and over again forever:

void loop() {

  digitalWrite(buzzPin, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(1000);               // wait for a second

  digitalWrite(buzzPin, LOW);    // turn the LED off by making the voltage LOW

  delay(1000);               // wait for a second

}