mcjFullSwing

Introduction

This swing set is the sum of 3 props which are found elsewhere on this site

the roof/floor prop is name mcjKiosk

https://sites.google.com/site/mcasualsdazscripts3/mcjkiosk

the bench prop is named mcjWoodBench

https://sites.google.com/site/mcasualsdazscripts3/mcjwoodbench

the suspension/swing mechanism is named mcjSwingMech

https://sites.google.com/site/mcasualsdazscripts3/mcjswingmech

Installation

Unzip the file found at the bottom of this page into your daz studio content folder

typically : c:\program files\daz\studio\content

once installed the prop will appear in your library under content/props/mcasual

Use

the XRotate property of the part named rodRearLeft is the main swing control

lets call it angle S

for example rotate rodRearLeft 30 degrees

the part named rodFrontLeft should then have its XRotate property set to angle S too

for example rotate rodFrontLeft 30 degrees

the part named hingeBRear should then have its XRotate property set to - 180 - S

this makes the seat remain horizontal

for example rotate hingeBRear to - 210 degrees

License

by mCasual/Jacques

You can use this models freely for personal or commercial use.

You may not sell / resell, or rent this models in any way.

you may credit this prop to mCasual/Jacques

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE

FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.