ENGT 280 Video Demos

Below are links to view the demonstration videos for the

ENGT 280 Mechanical Drawing projects.

When you click on the links below it will open a window to play the demonstration video file. Each video shows a demonstration of the process to complete the 3D model of the project. If the project requires a section view, the setup for these views are also shown. Also included is the process to setup the 2D views in the sheet view of the project. The first project includes the process of the dimensioning of the views and in some later projects additional dimensioning information is included.

I hope that you will enjoy these videos and that they will further

your understanding of 3D modeling with MicroStation V8i.

Project 1 - Step Pulley

Part 1 - Construction of the Model

Part 2 - Setup of the Saved and Section Views

Part 3 - Creating the Sheet View and Setting up the 2D Views

Part 4 - Annotating the 2D Views and Title Block

Project 2 - Connector

Construction of the Model and Setting Up the Views

Project 3 - Shaft Base

Construction of the Model and Setting Up the Views

Project 4 - Pipe Collar

Construction of the Model and Setting Up the Views

Project 5 - Pivot Base

Part 1 - Construction of the Model

Part 2 - Setting Up the Views

Project 6 - Two Post Column Base

Part 1 - Construction of the Model

Part 2 - Creating the Section Views and Setting Up the 2D Views

Project 7 - Base

Part 1 - Construction of the Model

Part 2 - Creating the Section Views, Setting Up the 2D Views,and

Setting Up the Tolerance Dimension Styles

Project 8 - Dovetail Hinge

Part 1 - Constructing the Model

Part 2 - Creating the Sheet View and View Setup

Project 9 - Head-End Bearing

Part 1 - Construction of the Model

Part 2 - Setting Up the Section View and Sheet View

Project 10 - Housing

Part 1 - Construction of the Model

Part 2 - Setting Up the Section Views and Sheet Views

Project 11 - Mounting Base

Part 1 - Construction of the Model

Part 2 - Setting Up the Three Section Views

Part 3 - Setting Up the Sheet Views

Project 12 - Locating Stand

Construction of the Model and Setting Up the Views

Project 13 - Angle Bracket

Construction of the Model, Setting Up the Views, and Dimensioning

Project 14 - Pivot Base

Construction of the Model and Setting Up the Views

Project 15 - Tool Sharpener Base

Construction of the Model and Setting Up the Views