Spark Plugs

Tools used: Floor Jack, stock lug nut wrench, one jack stand, body panel puller, 5/8" spark plug socket, u-joint, 3", 8", and 10" extentions, ratchet, light, anti-seize, boot grease, partitioned box.

Plug Prep

Passenger side:

Front wheel removed, view of shielding

Shielding moved to expose plugs.

Drivers Side

Front wheel removed, view of shielding

Shielding moved, exposing front two plugs.

Rear plug from side

Rear plug location from underneath

3" extension showing where wrench goes

I used the u-joint behind the socket for every plug, this makes matching the angle of the spark plug hole much easier. On the plugs that were accessed from the wheel wells the 8" and 10" extension were used in tandem to bring the ratchet out to a better location. On the drivers rear plug the 3" extension was used. Engine cover was not removed, hood was opened only to disconnect/reconnect the battery.