Embedded Files
PROJECT OVERVIEW
PROJECT OVERVIEW
BUILDING 7 BOBS = BRETON (BAY) OBSERVATION BOXES THAT WILL SEND DATA VIA CELLULAR LINK TO “THE CLOUD” EVERY 10 MINUTES. DATA WILL BE DISPLAYED ON A PUBLIC-ACCESSIBLE WEBSITE.
BUILDING 7 BOBS = BRETON (BAY) OBSERVATION BOXES THAT WILL SEND DATA VIA CELLULAR LINK TO “THE CLOUD” EVERY 10 MINUTES. DATA WILL BE DISPLAYED ON A PUBLIC-ACCESSIBLE WEBSITE.
MEET BOB! This student Project is Bobbing Along in Breton Bay, Maryland - Bay Backpack
MEET BOB! This student Project is Bobbing Along in Breton Bay, Maryland - Bay Backpack
High school students build and deploy water quality monitoring equipment
ForrestTech EngClass 2023-02-15.pdfWorking on Soldering the TCS34725 (Light sensor)
Soldering
Soldering
soldering.mp4Close up video of soldering
Close up video of soldering
Turbidity monitoring wKduino 2023-11-20.pptxTurbidity Monitoring Sensor Testing and Quality Control Presentation
Kduino Lesson #2 2-13-24.pptxWorking on Sensor Testing
Testing with the light
Testing with the light
testing the sensor
testing the sensor
Construction on Turbididy Sensors
Construction on Turbididy Sensors
BOB - KdUINO Lesson #3 3-21-24.pptxThis is the instructions we used to Create the turbidity sensor capsule
This is the instructions we used to Create the turbidity sensor capsule
the purple is the primer for the actual glue to keep the tubes in place.
The full assembly of the entire capsule.
The arrow represent which way the tube goes into the block so that we have accurate measurements.
The letters are labels made to make sure the fittings are in the proper place.
Page updated
Google Sites
Report abuse