XBM-FA3C has a sheet feeder box, three cylinders: feeding cylinder, bending cylinder and delivery cylinder, it is connected to an 820 Micro PLC unit as a controller and it’s surrounded by acrylic box for safety manners, with a gate that allows the bent sheet to be pushed out of the acrylic box. It comes with two operation mode: semi-auto and auto modes and three control modes: control by SCADA, control by sheet quantity and control by time. Control by time available with two options: control by time variable and control by time factor. The SCADA system consists of eight displays.
In semi-auto mode; you should press the two-starting push-buttons simultaneously without exceeding 0.5 second between pressing both push-buttons. If you exceeded 0.5 second the system won’t run and if you move your hand away before the process is done the both cylinders will return to the original position immediately, this is for safety manner, applying Two-Hands Operation Safety.