Tip : The Plasma Cutter Machine is designed for professionals and enthusiasts seeking high-performance cutting with precision and efficiency. If you want to check out some popular options to help you make a decision, please visit our link below. Amazon has compiled a list in " Best Sellers in Plasma Cutting Equipment " , for superior cutting experiences across a variety of metals. If you have specific questions about these products or would like more information, please don't hesitate to ask!
(With As Amazon)
Model: STC850P MAX
Cutting Thickness: This Non-HF pilot arc plasma cutter from SILATU includes an automatic voltage detection system that works with both 110V and 220V inputs, operating on a single-phase power supply with a 60% duty cycle. It is optimized for cutting materials up to 12mm thick at 40A on 110V with 45 PSI air pressure, and up to 30mm thick at 85A on 220V with 70 PSI. For electrical safety, it requires a big current circuit breaker for 110V operation and a 50A breaker for 220V. The versatility of this SILATU plasma cutter makes it suitable for a wide range of materials, including stainless steel, alloy steel, mild steel, copper, aluminum, etc.
Digital Screen Display: The SILATU CNC plasma cutter's digital display panel provides a centralized view of key parameters such as air pressure, voltage, and current. This allows operators to monitor the machine's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event that the blow-back plasma cutter does not function properly, the screen offers an error code system to assist in troubleshooting and identifying issues quickly.
Air Sensor Technology: An integrated air sensor displays the air pressure on the machine's front panel. Users can manually adjust the air pressure using the air regulator, as automatic adjustment is not available. An air filter is installed at the rear of the unit, featuring a quick-connect 1/4 NPT air fitting for easy setup. When connected to an air compressor, the recommended air pressure should be set to around 65 PSI, with a flow rate of approximately 250 liters per minute.
PT/2T/4T/PA Function: The post-flow cooling time, adjustable between 3 and 15 seconds, extend the life of the torch head and consumables. The 2T mode offers semi-automatic control over the torch trigger, whereas the 4T mode enables fully automatic triggering, freeing the operator's hand. The PA setting adjusts the duration of the pilot arc. Additionally, the SILATU plasma cutter model STC850P MAX incorporates a mesh cutting mode designed to prevent arc interruption when cutting mesh materials.
And ...
The SILATU CNC Plasma Cutter Machine is designed for professionals and enthusiasts seeking high-performance cutting with precision and efficiency. With 85Amp Blow Back Pilot Arc technology, a large digital screen display, and dual voltage compatibility, this machine is built for superior cutting experiences across a variety of metals.
CNC Functionality for Seamless Integration
The SILATU plasma cutter is equipped with blow-back technology and a Non-HF (non-high frequency) pilot arc, making it compatible with CNC systems while minimizing signal interference. The non-contact arc initiation enhances cutting stability and longevity.
The machine includes:
2-pin connector for arc voltage output at a 1:1 ratio
5-pin connector for signal control
These features enable easy integration with CNC cutting tables, ensuring precision and consistency in every cut.
Superior Cutting Thickness & Dual Voltage Operation
This plasma cutter is designed for versatile cutting applications and supports both 110V and 220V inputs.
At 110V (40A, 45 PSI): Cuts materials up to 12mm thick
At 220V (85A, 70 PSI): Cuts materials up to 30mm thick
For electrical safety, ensure a big current circuit breaker for 110V use and a 50A breaker for 220V.
Large Digital Screen Display
The advanced digital screen panel displays real-time air pressure, voltage, and current settings for optimized performance. Additionally, in case of malfunctions, the error code system assists in quick troubleshooting and efficient maintenance.
Air Sensor Technology for Precision Airflow Control
The integrated air sensor monitors air pressure and displays it on the front panel.
Users can manually adjust air pressure via the air regulator
Quick-connect 1/4 NPT air fitting for hassle-free setup
Air filter included at the rear of the unit
For best performance, set air pressure at 65 PSI with a 250 L/min flow rate when connected to an air compressor.
PT/2T/4T/PA Functionality for Versatile Operation
Adjustable post-flow cooling time (3-15 seconds) extends torch head life and consumables longevity
2T Mode: Semi-automatic control for precision cuts
4T Mode: Fully automatic triggering, allowing for longer continuous cuts
PA Setting: Customizes pilot arc duration
Mesh Cutting Mode: Prevents arc interruption when working with mesh materials
CNC Cutting Torch Compatibility
For CNC applications, the straight torch (PTM80 or PTM60 models) is recommended (sold separately). However, the handheld cutting torch included with the unit can also be securely fastened for CNC use.
The SILATU CNC Plasma Cutter Machine is an ideal solution for professionals requiring high precision, power, and CNC integration. With 85A cutting power, advanced digital controls, and seamless connectivity, it ensures efficient and high-quality cuts on a wide range of metals. Whether you're working in automotive, metal fabrication, or industrial applications, this plasma cutter is built to exceed expectations and deliver outstanding results every time.