Research and Teaching
@ IIT Kanpur
Projects
Development of a Novel Underwater Welding Process for Defect-free Joints using In-Situ Imaging and Machine Learning: 108.38313 lakhs (MOES), Ongoing, as PI
Numerical Investigation of the Structural Integrity of a Mechanically Designed Temperature Sensor Box: Nexleaf Analytics: 10.325 lakhs (Consultancy project), Completed, as Co-PI (PI: Dr. Supratik Mukhopadhyay)
Development of Mushy Zone Permeability During Solidification of Multi-Component Alloys Through In-Situ Imaging: IIT Kanpur: 25 Lakhs (Initiation Grant), Ongoing, as PI
Special Grant from IIT Kanpur: 47 Lakhs, Completed as PI
Developing Parameters For Manufacturing Of Multi-Stage Single-Crystal Turbine Blades: SERB India: 32.01 Lakhs (Startup Research Grant), Ongoing, as PI
Dropwise Condensation Of Water Vapor Over Patterned Surfaces: SERB India: 70.73 Lakhs, Ongoing (Co-PI: Prof. K Muralidhar)
Facilities
Directional Solidification-Bridgman Furnace
Fronius Welding Machine (MIG/SMAW) Pulse technology included
Spin coater
Magnetic Stirrers Hot Plate
CMOS Camera~200 FPS
Navitar Zoom lens (6.5 X)
Shadowgraph (Light source+lens+mountings+rails)
Lens for micro PIV (droplet application)
White light Source for high-speed imaging (~6000 FPS)
2800K-6500K Light source for high-speed imaging: GODOX SL100BI (100W)
Circulator bath (-20°C to 80°C)
Julabo Circulator bath (-40°C to 200°C)
Data Acquisition System: TC 08 Data logger
DC Power source (32 V and 5A)
Diaphragm Vacuum Source
Ultrasonic Cleaner
Holmarc optical table (150 cm × 90 cm)
Hot air oven (250 °C)
Fluke Digital Multimeter
Weighing Balance (max: 220 g)
Micropipette
Refractometer
Furnace (900 deg C) with vacuum and gas purging facility.
Teaching
2024-25 Yr.
Sem-I
TA212: Manufacturing Processes II (UG core course: as an instructor, number of students~293)
ME664: Fundamental of casting and solidification (PG core course: as instructor, number of students~93)
2023-24 Yr.
Sem-I
ME361A: Manufacturing Science & Technology (UG core course: as instructor, number of students~160)
TA 111A/TA 111: Engineering Graphics (UG core course elective: as a tutor, number of students~32)
Sem-II
ME692: Welding Technology (PG elective: as an instructor, number of students~219)
2022-23 Yr.
Sem-I
TA 111A: Engineering Graphics (UG core course elective: as tutor, number of students~32)
Sem-II
ME692A: Welding Technology (PG elective: as an instructor, number of students~30)
TA 202A: Introduction to Manufacturing Processes (UG core course elective: as a tutor, number of students~112)