optical fibre identifier EFI-50
max. input power: +20dBm
max. sensitivity: -50dBm
detect 270Hz, 1kHz, 2kHz from laser source
fibre: 0.25 / 0.9 / 2.0 / 3.0mm / ribbon
SM & MM (OM3, OM4, OM5)
no need for the clamp blocks
ambient light cover
VFL: 1mW, with Glint
OPM: T: -70 ~ +6dBm; C: -50 ~ +26dBm
195 x 96 x 37mm / 140g
detects bi-directional signal
screen: 1.44 inch TFT
optical fibre identifier AFI-430
max. input power: +20dBm
max. sensitivity: -50dBm
detect 270Hz, 1kHz, 2kHz from laser source
fibre: 0.25 / 0.9 / 2.0 / 3.0mm / ribbon
SM & MM (OM3, OM4, OM5)
no need for the clamp blocks
ambient light cover
230 x 45 x 45mm / 200g
detects bi-directional signal
live fibre line finder
online detection does not damage the optical fibre and interfere with the signal
insertion loss is as low as 0.8dB
built-in fibre protection mechanism
support 2mm and 3mm fibre cables
easy to use, no need to replace the chunks
support 270, 1, 2kHz modulation signals
remote receiving via wireless signal for easy viewing in some constraint space
small size and light weight, suitable for carrying
method-1:
apply the Receiver UFFRx-302 as a traditional Fibre Identifier.
method-2:
apply the Signal generator UFFTx-351 to the fibre cable you are interested in.
apply the Receiver UFFRx-302 to the location, where you try to find the fibre cable that is attached to the Signal generator UFFTx-351.
go through the fibre cable till the Receiver UFFRx-302finds the the Signal generator UFFTx-351 signal.
method-3:
apply the Receiver UFFRx-302 to the fibre cable you are interested in, presses the handle to turn on, press the Mode key to Mode2 mode, and fix the Receiver on the ODF bracket.
apply the Signal generator UFFTx-351 to the location, where you try to find the fibre cable that is attached to the Receiver UFFRx-302.
go through the fibre cable till the Wireless monitor UFFWL-302 finds the the Signal generator UFFTx-351 signal.