Topic: Mechanical tools
Time: 20 minutes
Resources: All the 18 Mechanical tools, labels of all the 18 tools in a bowl.
Ø Divide the whole class into two groups keep half the mechanical tools on the table at the centre
Ø Select two volunteers from each group to come forward and do the activity. Other team members have to guide the volunteers to perform the activity.
Ø Ask each group's volunteer to pick up nine chits from the bowl.
Ø Ask them to place the chit next to the tool. And arrange the tools on the table based on their purpose.
Topic: power tools
Time 30 minutes
(Power drill, cardboard), (Glue gun and two pieces of sun boards), (Hot air gun and two boards attached with a glue gun). (Safety goggles, hand gloves and face mask).
1. Each group one station either power tools or Glue Gun or Hot air gun.
a. Power Drill Activity – Create holes on the cardboard to make the letter " L".
b. Hot Air gun Activity - Use the hot air gun to remove the adhesive from the two boards.
c. Hot glue gun Activity - Apply glue gun and try to attach the two sun boards
2. Groups can shuffle their stations as soon as they have completed.
Topic: Measurement tools
Vernier caliper, Multimeter, Digital oscilloscope, Sprit Level, & Measurement tape
Time: 30 minutes
Resources: For a group of participants (Vernier Caliper, Multimeter, Digital Oscilloscope, Spirit Level & Measurement Tape).
1. Vernier Caliper: Take a bottle cap, measure its inner as well as outer diameter & try to design it in 3D CAD software.
2. Multimeter: Take a battery, five different resistors, Diode & 2 LEDs. Try to check the Voltage & Ampere of the battery. The resistance of resister & value of diode.
3. Digital Oscilloscope: Try to check the wavelength of the Hand/ body current.
4. Spirit Level: Check the level of the table whether the table is tilted or not.
5. Measurement tape: Try to measure the dimensions of the table & record it in your notebook.