Journal

1. Discrete Slot Design for Turbine Blade Tip Cooling: A Comparative Study with Continuous Slot, International Communications in Heat and Mass Transfer, 168, 109436, Minho Bang, Seungyeong Choi, Hyung Hee Cho+
   <Link> (JCR top 6.1%, Q1) 

1. Machine learning-assisted effective thermal management of rotor-stator systems, Energy, 299, 131528,  Seungyeong Choi, Minho Bang,  Hee Seung Park, Jeonghun Heo, Myung Hwan Cho, Hyung Hee Cho+
   <Link> (JCR top 3.3%, Q1) 

2. Effect of Misalignment at the Flat and Profiled Endwall of Nozzle Guide Vane on Heat Transfer, International Journal of Heat and Mass Transfer, 230, 125750, JeongJu Kim, Hee Seung Park, JeongWon Lee, Hee Koo Moon, Minho Bang, Hyung Hee Cho+
   <Link> (JCR top 9.7%, Q1) 

3. Enhanced cooling performance of blade tip slot cooling: Effect of slot open length, International Communications in Heat and Mass Transfer, 158, 107871, Minho Bang, Seungyeong Choi, Namkyu Lee, Hyung Hee Cho+
   <Link> (JCR top 4.4%, Q1) 

1. Augmented cooling performance in gas turbine blade tip with slot cooling, International Journal of Heat and Mass Transfer, 201, 123664,  Minho Bang, Seungyeong Choi, Seok Min Choi, Dong-Ho Rhee, Hee Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 10.9%, Q1) 

2. Enhancement of blade tip cooling with different position on tip cooling slot, International Journal of Heat and Mass Transfer, 200, 123500,  Minho Bang, Seungyeong Choi, Seok Min Choi, Hee Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 10.9%, Q1) 

1. Heat Transfer Measurements for Array Jet Impingement With Castellated Wall, Journal of Turbomachinery, 144, 3, 123664,  Taehyun Kim, Eui Yeop Jung, Minho Bang, Changyong Lee, Hee Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 69.2%, Q3) 

1. Effect of shelf squealer tip configuration on aerothermal performance of gas turbine blade, International Journal of Thermal Sciences, 168, 107056, JeongJu Kim, Wonjik Seo, Heeyoon Chung, Minho Bang, Hyung Hee Cho+
   <Link> (JCR top 16.4%, Q1) 

2. Unsteady hot gas ingestion through the double rim-seals of an axial gas turbine, International Journal of Mechanical Sciences, 207, 106664, Seungyeong Choi, Minho Bang, Seok Min Choi, Myung Hwan Cho, Hee-Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 10.3%, Q1) 

3. Delta-winglet-pair for enhancing cooling performance of a single dimple imprinted internal channel, International Journal of Heat and Mass Transfer, 178, 121647, Seok Min Choi*, Hyun Goo Kwon*, Seungyeong Choi, Minho Bang, Hee Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 7.4%, Q1) 

4. Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing: Effect of channel gap height, International Journal of Heat and Mass Transfer, 175, 121420, Minho Bang*, Sangjae Kim*, Hee Seung Park, Taehyun Kim, Dong-Ho Rhee, Hyung Hee Cho+ (* Co-first author)
   <Link> (JCR top 7.4%, Q1) 

5. Wake effects on heat transfer from a turbine blade tip with different configurations and its corresponding shroud, International Communications in Heat and Mass Transfer, 126, 105333, Seok Min Choi, Minho Bang, Hee Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 12.5%, Q1) 

6. Heat transfer from a dimple-imprint downstream of boundary-layer trip-wire, International Journal of Heat and Mass Transfer, 173, 121242, Seok Min Choi*, Hyun Goo Kwon*, Minho Bang, Hee Koo Moon, Hyung Hee Cho+
   <Link> (JCR top 7.4%, Q1) 

7. Effects of seal installation in the mid-passage gap between turbine blade platforms on film cooling, Applied Thermal Engineering, 189, 116683, Sehjin Park, JeongJu Kim, Minho Bang, Hee Koo Moon, Osamu Ueda, Hyung Hee Cho+
   <Link> (JCR top 9.6%, Q1) 

8. Efficient design of heat exchange for CFB reactors in CO2 capture system regarding geometry-induced secondary flow, Energy Conversion and Management, 235, 113995, Seungyeong Choi, Hokyu Moon, Minho Bang, Kiwoong Kim, Yong-Ki Park, Hyung Hee Cho+
   <Link> (JCR top 2.2%, Q1) 

9. 가스터빈 블레이드 전연부 필렛 적용에 따른 유동 및 열전달 특성 분석, 대한기계학회 논문집 B 권, 45, 1, 최석민, 박희승, 방민호, 조형희+
   <Link> (KCI) 

1. Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing, International Journal of Heat and Mass Transfer, 155, 119786, Minho Bang*, Sangjae Kim*, Seungyeong Choi, Ho-Seong Sohn, Hyung Hee Cho+  (* Co-first author)
   <Link> (JCR top 6.0%, Q1) 

2. 가스터빈 블레이드 전연면 내부 유로 요철 형상에 따른 열전달 특성 연구, 44, 5, 대한기계학회 논문집 B 권, 김진훈, 김정주, 방민호, 김태현, 박희승, 조형희+
   <Link> (KCI) 

3. 3D 프린팅을 활용한 가스 터빈 고온 부품 냉각 기술 개발, 기계저널 제60권 제2호(통권 제471호), 조형희+，방민호，박희승
   <Link> (일반저널) 

1. 격자 구조 유로의 냉각 성능 향상을 위한 요철 형상 연구, 43, 5, 대한기계학회 논문집 B 권, 이형민, 최석민, 방민호, 김태현, 주원구, 조형희+
   <Link> (KCI) 

1. Effects of unsteady wakes on heat transfer of blade tip and shroud, International Communications in Heat and Mass Transfer, 97, p.125-135, Minho Bang, Seok Min Choi, Ho-Seong Sohn, Jun Su Park, Hyung Hee Cho+
   <Link> (JCR top 4.5%, Q1) 

2. Effect of the wake on the heat transfer of a turbine blade endwall according to relative position of the cylindrical rod, International Communications in Heat and Mass Transfer, 94, p.61-70, Seok Min Choi, Junsoo Kim, Minho Bang, JeongJu Kim, Hyung Hee Cho+
   <Link> (JCR top 5.3%, Q1)