Coloring
The process of coloring the tattoo is very simple and easy. Tattoo supplies are the main supplies which help in coloring. In the process of coloring you have just have to follow some key rules and by practicing them again and again. This technique is similar for both black solid tattooing and same to solid coloring. But the only difference is that the black color tattoo is easy to place than any colored tattoo because black ink is easily accepted by the skin than a colored ink. The motion of tattooing is I circular path and the process of tattooing is done in small circular steps. Never move the tip of needle again and again on one place just move only one times, so this covers an area smooth and efficiently. So for the sake of convince, and for the protection of skin do not press hard on the skin and do not stay in one area repeatedly.
So in the using of Tattoo Supplies this must be considered. For the process of coloring the needles are in contact with skin so be careful and do not hold it still that it can cut the skin so keep moving the machine.
The tattoo will look beautiful with the fewest amounts of holes in the skin. So if there is number of holes in the skin there will be more bleeding and hence more scabbing. So due to number of holes the more ink will be absorbed out in the scab. The color of tattoo will not be brighter when you try to enter the color into the skin. When applying color to a tattoo, the ink will get in all over the skin. Working so quickly is not good must take the time to continuously wipe the excess away. When the color is solid and the skin is stretched it will look like solid when relaxed in a normal position. If the place that is to be a solid color has skin showing so to finish this troubleshoot something must be done. The best and effective solution is that the tattooing circle should not be so small. One important reason is also that the needles are not in touch with the skin all the time. This explains that in all the tattooing process, the machine is not kept slowly and the needles are being lifted up off the skin.
Another cause for open pockets in the coloring is that the coloring process is incomplete and the colors are not mixed very well. So to mix the colors properly the tattoo supplies are used. Shake well the bottles of ink before using the ink.
While using tattoo supplies in the process of coloring different shades the tubes and needles must be thoroughly cleaned. Wash well the tube between colors by placing the machine under the hot water until the machine is thoroughly cleaned. Must use tissue paper tom remove the water from the needles after washing it with hot water. Wash it side by side so that no part of the needle left dry. In the coloring process the sequence is very important. When you use color according to your choice it can cause some problems and the beauty can affect so much.
When certain sequence not be followed then the tattoo will spoiled with dull tones. According to this a muddy mixture can also be appeared. If the sequence of coloring is not flowed so it can cause clouding up the tattoo. The sequence process is so simple. Colors are used from the darkest tones to the lighter tones. After the outline the black shading is very important
As black color is the darkest color so it should be applied first. Also solid black is applied first. So by giving priority to the tattoo supplies the sequence is followed as follows:
· Dark purple
· Green
· Blue
· Light purple
· Red
· Brown
· Orange
· Yellow
· white
Reference Link:
https://tattoosuppliesit.blogspot.com/2021/09/tattoo-supplies-for-beautiful-tattoo.html