An Overview Of WS2 Dry Lube Online: Superior Coating For Bearings!

WS2 Dry Lube Online | cdn11.bigcommerce.com

WS2 turns out to be a superior coating for bearings where you may not be able to use conventional lubricants. It is required to be used in areas of such applications for an extended wear or tear like transmissions or gear box. Before purchasing WS2 dry lube online you need to take into consideration that the coating extends the shelf life.

WS2 dry lube application process

WS2 historically has been used on metal components along with some versions of non- metallic items in the form of thermo setting polymers. There is going to be a thin coating of ½ micron in thickness that helps to trim down the friction levels. WS dry lube online is compatible with metal components like greases or hydraulic oil.

The raw material has to be powdered properly and needs to be free from various contaminants. It needs to be compatible with liquid oxygen systems along with hard radiation requirements. Before the application, any components that has to be coated needs to be cleaned properly. This would enable them to remove all the external substances like oil, grease dirt along with any type of oxidation. It needs to be handled properly to prevent any form of re- contamination during coating process.

Adhesion verification is going to verify WS 2, where it relies on the use of a pressure sensitive tape. This is applied on to the sample directly and then removed in accordance. In addition the thickness needs to include less than 0.0002 micron. The coatings also need to withstand temperatures in a specific bracket. Coming to the appearance the coating film has to be of grey colour which does not have any blisters, cracks, pin holes or any type of surface imperfections. Last is the quality aspect, where inspection of the parts takes place to ensure proper verification and adhesion. The coating has to be smooth, uniform in colour and needs to be devoid from surface imperfections.

There were a lot of experiments conducted that did go on to showcase improvements in resin to the tune of 2 % to 5 %.