https://makecode.microbit.org/device/usb/webusb/troubleshoot
確定你的 micro:bit 使用了 micro USB 線連接到電腦。 For example, in Windows Explorer you should see a MICROBIT drive appear when it’s connected.
If you can see the MICROBIT drive go to step 2.
If you can’t see the drive:
確定 USB 線沒有問題。 >Does the cable work on another computer? If not, find a different cable to use. Some cables may only provide a power connection and don’t actually transfer data.
Try another USB port on your computer.
Is the cable good but you still can’t see the MICROBIT drive? Hmm, you might have a problem with your micro:bit. Try the additional steps described in the fault finding page at microbit.org. If this doesn’t help, you can create a support ticket to notify the Micro:bit Foundation of the problem. Skip the remaining troubleshooting steps.
If your downloads still aren’t working, it’s possible that the firmware version on the micro:bit needs an update. 我們來檢查一下：
Navigate to the MICROBIT drive in the computer’s File Explorer.
Look for the DETAILS.TXT file and open it.
Look for a line in the file that says the version number. It should say Version:
or Interface Version:
If the version is 0234, 0241, 0243 you NEED to update the firmware on your micro:bit. 移至步驟 3，並按照升級說明進行操作。
If the version is 0249, 0250 or higher, you have the right firmware go to step 4.
To do this, unplug the USB cable from the micro:bit and then reconnect the USB cable while you hold down the reset button. Once you insert the cable, you can release the reset button. You should now see a MAINTENANCE drive instead of the MICROBIT drive like before. Also, a yellow LED light will stay on next to the reset button.
Download the firmware .hex file.
Drag and drop that file onto the MAINTENANCE drive.
The yellow LED will flash while the HEX file is copying. When the copy finishes, the LED will go off and the micro:bit resets. The MAINTENANCE drive now changes back to MICROBIT.
升級完成！ You can open the DETAILS.TXT file to check and see that the firmware version changed to the match the version of the HEX file you copied.
Firmware guide
If you want to know more about connecting the board, MAINTENANCE Mode, and upgrading the firmware, read about it in the Firmware guide.
WebUSB is a fairly new feature and may require you to update your browser. Check that your browser version matches one of those in the table below.
Browser versions for Android, Chrome OS, Linux, macOS, and Windows 10, 11:
瀏覽器
Version
Chrome
61+
Edge
79+
Safari
Not supported
For other browsers, see the supported versions in the Can I use? table for WebUSB.
Once you’ve updated the firmware, open the Chrome Browser, go to the editor and click on Pair Device in the gearwheel menu. See WebUSB for pairing instructions.
Enjoy fast downloads!
Edit this page on GitHub
Edit template of this page on GitHub
Edit template of this page on GitHub