STRATHROY FIBRE ARTS GUILD EQUIPMENT
The following are available to guild members. If you want to borrow something please send an email to strathroyfibrearts@gmail.com or come to an Open Studio session on Wednesday from 12 to 4.
Spinning
Strauch chain drive drum carder with doffer, flick carder and brush
Louet S51 single treadle spinning wheel with built in Lazy Kate, 3 bobbins and threading hook
Ashford blending board with dowels and brush, adjustable base with capped screws
Brother ball winder
GAD Swedish wooden yarn swift
Looms
Leclerc Artisat 4-shaft 36” floor loom with bench containing Leclerc red Robertson screwdriver and crank for warp beam. Dimensions: folded 46”w x 44”h x 14”d, open 36½“h x 32”d Equipment includes: Set of dollies for moving Artisat, designed to also fit bench legs, 36” raddle, three 36” reeds, 8, 10 & 12 dent, 2 lease sticks, 36” warping sticks
Ashford 8-shaft 24” folding table loom equipment includes: threading hook, 2 stick shuttles, 3 reeds, 8, 10 and 12 dent, raddle, 2 lease sticks, warping sticks, 2 large snap rings, 480 texsolv heddles, step-by-step instruction book
Ashford 16” rigid heddle loom equipment includes: 2 heddles, 10 dent and 7.5 dent, threading hook, 2 stick shuttles, warping peg and clamp, instruction booklets, second heddle option side posts, holes drilled in bottom rails to use loom as a warping frame, 14 pegs. 2 clamps, plastic sleying hook, roll of 18” warping paper, Ashford Fibre Craft Magazine, issue 26, 2014. Weaving length maximum 15.5’
Leclerc Cendrel floor model inkle loom weaving width up to 6”, weaving length up to 16’. Dimensions 28½”w x 32¾”h x14”d. May be used as a warping board for up to 10yard warp. Includes manual.
Home made inkle loom weaving length min 46”, max 72”
Leclerc Dorothy 4-shaft table loom with folding table stand. Equipment includes: 16” raddle, 4 reeds, 8, 10, 12 & 15 dent, lease sticks, warping paper, extra heddles, 2 metal rods. Red Robertson screwdriver tied to side bar.
Leclerc Dorothy 8-shaft conversion kit
Warping
Leclerc warping frame: 6.5 yd ( 22 ¾” x 20”),
Leclerc warping frame: 13 yd (22 ¾” x 40 ½”)
Leclerc table top warping mill includes stand and clamp in bag, 2 cross pieces with 6 pegs
Shuttles
Stick shuttles 35”, 18”, 12”, 10.5”, 9”
Rag Shuttles
Leclerc boat shuttles - regular
Louet boat-shaped shuttle - oversize
Miscellaneous
Cone holders, one 6-cone and four 1-cone
Plastic bobbins for boat shuttles 23 standard, 2 large
Bobbin winders
Fraser Model 500-1 cloth stripper, additional rollers, manual, wrench
Electric scissors in pleather case