SteConPro 1.7

SteConPro app can be used to calculate Steam and Condensate Properties for steam and condensate. It also includes several calculations for steam and condensate engineers.

The app includes practical tools for engineers to calculate flow speeds for steam, condensate, and two-phase flows. There are five different preset piping schedules which can be changed by the user.  

Flashing calculation can be used to calculate condensate flashing when condensate pressure is reduced below the saturated pressure.

Desuperheating calculation caluates needed cooling water flow to cool the super heated steam to the given superheat temperature. 

Partial  vessel volume calculation calculates volume and flow rate to/from a vessel, time for draw-down/raise-up the level measured from from the bottom or from the transmitter measuring range can be used.

Orifice calculation calculates steam or condensate flows through an orifice.

Diameter vs Perimeter calculation can be calculated insulated pipe diamater or thermal lagging thickness.

Dryer calculation can be used to calculate flows for a cylinder dryer part. Flows can be saved (double tap) and used in other calculations in the app.

Pressure losses can be calculated for pipe flow with various components. Pressure loss can be also calculated for an annulus.

A software installer for Windows is available if You have aquired the Android app. There will not be any version for iPhone due to high cost of the Apple App Store.