2025
Arjomandi, M., Mukherjee, T. A review of applications of collaborative robot in welding and additive manufacturing, Under review.
Arjomandi, M., Ngo, Q., Mukherjee, T. (2025). Effects of gravity on track integrity during collaborative robot assisted wire arc deposition. SFF 2025 (accepted for publication).
Sinha, S., Mukherjee, T. (2025). Effects of beam shaping on temperature, pool geometry, and cooling rate in laser powder bed fusion. Manufacturing Letters, 45, 53-59.
Polasi, R., Sinha, S., Haddad, M., Wolff, S., Mukherjee, T. (2025). Hierarchical importance of physical factors causing gas porosity in additive manufacturing, Science and Technology of Welding and Joining.
Du, Y., DebRoy, T., Mukherjee, T. (2025). Effects of wavelength on fusion-zone geometry, cooling rate, and solidification parameters during keyhole mode laser welding of pure copper. Journal of Laser Applications, 37, 022014.
Sinha, S., Du, Y., Mukherjee, T. (2025). Variations in fusion zone geometry, cooling rates, and solidification parameters during adjustable mode beam laser powder bed fusion. MSEC. Article no. 155596.
Polasi, R., Mukherjee, T. Modeling of selective evaporation induced composition change during high-power laser metal processing, Proc. SPIE 13356, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XIV. 133560R.
Motley, J., Arjomandi, M., Mukherjee, T., (2025). Effects of longitudinal arc oscillation on track integrity during collaborative robot-assisted wire arc deposition, International Manufacturing Science and Engineering Conference. MSEC. Article no. 151292.
Arjomandi, M., Sanvelly, R., Mukherjee, T., (2025). Variations in Temperature, Residual Stress, and Distortion in Collaborative Robot-Assisted Patterned Additive Manufacturing, Manufacturing Letters, 43, 64-69.
Wu, Q., Yang, S., Mukherjee, T., Liu, J., Tang, W., Lv, C., & Yang, J. (2025). Acousto-optic signal-based in-situ measurements supporting part quality improvement in additive manufacturing. Measurement, 241, 115786.
2024
Gao, M., Mukherjee, T., Palmer, T. A., Zhang, W., & DebRoy, T. (2024). Modelling of cracking during beam oscillation laser welding of a creep-resistant nickel alloy. Science and Technology of Welding and Joining, 13621718241289300.
Mukherjee, T., Shinjo, J., DebRoy, T., & Panwisawas, C. (2024). Integrated modeling to control vaporization-induced composition change during additive manufacturing of nickel-based superalloys. npj Computational Materials, 10(1), 230.
Rapaka, R., Ladi, H., Raja, D., Muvvala, G., Mukherjee, T., & Vicharapu, B. (2024). Understanding in-process responses in multi-layer friction stir additive manufacturing: Temperature, Viscosity, Tool torque, and Mechanical properties. Journal of Materials Processing Technology, 118491.
Mukherjee, T., Shen, W., Liao, Y., & Li, B. (2024). Improving Deposited Surface Quality in Additive Manufacturing Using Structured Light Scanning Characterization and Mechanistic Modeling. Journal of Manufacturing and Materials Processing, 8(3), 124.
Sinha, S., & Mukherjee, T. (2024). Mitigation of Gas Porosity in Additive Manufacturing Using Experimental Data Analysis and Mechanistic Modeling. Materials, 17(7), 1569.
2023
Mukherjee, T. (2023). Recent progress in process, structure, properties, and performance in additive manufacturing. Science and Technology of Welding and Joining, 28(9), 941-945.
Mukherjee, T., Gao, M., Palmer, T. A., & DebRoy, T. (2023). Keyhole mode wobble laser welding of a nickel base superalloy-Modeling, experiments, and process maps. Journal of Manufacturing Processes, 106, 465-479.
Mukherjee, T., & DebRoy, T. (2023). Theory and practice of additive manufacturing. John Wiley & Sons.
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023). Control of grain structure, phases, and defects in additive manufacturing of high-performance metallic components. Progress in Materials Science, 138, 101153.