Smart Structures Research Laboratory

PEER-REVIEWED JOURNAL PUBLICATIONS 

1. Kaynardağ, K., Chi, Y., Salamone, S., (2023). “A rail defect detection system based on laser Doppler vibrometer measurements”, NDT&E International, Vol. 137, doi.org/10.1016/j.ndteint.2023.102858 

2. Yang, C., Kaynardağ, K., Salamone, S., (2023). “Missing rail fastener detection based on laser doppler vibrometer measurements”, Journal of Nondestructive Evaluation, accepted.

3. Sitaropoulus, K., Salamone, S., Sela, P. (2023). “Frequency-based Leak Signature Investigation using Acoustic Sensors in Urban Water Distribution Networks”, Advanced Engineering Informatics, Vol. 55, https://doi.org/10.1016/j.aei.2023.101905.

4. Yang, C., Kaynardağ, K., Salamone, S., (2023). “Investigation of wave propagation and attenuation in periodic supported rails using wave finite element method”, Acta Mechanica, https://doi.org/10.1007/s00707-023-03484-8. 

5. Kaynardağ, K., Chi, Y., Salamone, S., (2022). “The numerical simulations to examine the interaction of train-induced guided waves with transverse cracks”, Transportation Research Record, Vol. 2676(12), pp. 166–179, doi:10.1177/03611981221094576 

6. Yang, C., Kaynardağ, K., Salamone, S., (2022). “Evaluation of fastening modeling approaches for dynamic assessment of rail based on finite element methods, Journal of Engineering Mechanics, Vol.148 (9), doi:10.1061/(ASCE)EM.1943-7889.0002137. 

7. Livadiotis, S., Sitaropoulos, K., Ebrahimkhanlou, A., Salamone, S., (2022). “Acoustic emission monitoring of corrosion in steel pipes using lamb-type helical waves”, Structural Heath Monitoring, doi:10.1177/14759217221105644 

8. Ebrahimkhanlou, A., Schneider, M., Dubuc, B., Salamone, S., (2021). “A deep learning framework for acoustic emission sources localization and characterization in complex aerospace panels”, Material Evaluations, Vol. 79 (4), pp. 391-400. (2022 ASNT Outstanding Paper Award)

9. Dubuc, B., Sitaropoulos, K., Ebrahimkhanlou, A., Salamone, S., (2021). “Acoustic emission diagnostics of corrosion monitoring in prestressed concrete using hidden Markov and semi Markov models, Structural Heath Monitoring, in print. 

10. Kaynardağ, K., Battaglia, G., Chi, Y., Salamone, S., (2020). “Experimental Investigation of the Modal Response of a Rail Span During and After Wheel Passage”, Transportation Research Record, in print 

11. Kaynardağ, K., Battaglia, G., Pirrotta, A., Salamone, S., (2020). “Identification of flexural modes of vibration in rails by a laser doppler vibrometer on a moving platform”, Experimental Techniques, in print. 

12. Livadiotis, S., Ebrahimkhanlou, A., Salamone, S., (2021). “Monitoring internal corrosion in steel pipelines: A two-step helical guided wave approach for localization and quantification”, Structural Heath Monitoring, in print 

13. Dubuc, B., Livadiotis, S., Ebrahimkhanlou, A., Salamone, S., (2020). “Crack-induced guided wave motion and modal excitability in plates using elastodynamic reciprocity”, Journal of Sound and Vibration, Vol. 476(23), 115287.

14. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2020). “Stress monitoring of prestressing strands in corrosive environments using modulated higher-order guided ultrasonic waves”, Structural Heath Monitoring, Vol. 19(1), pp. 202–214.

15. Athanasiou, A., Ebrahimkhanlou, A., Zaborac, J., Hrynyk, T., Salamone, S., (2020). “A machine learning approach based on multifractal features for crack assessment of reinforced concrete shells”, Computer-Aided Civil and Infrastructure Engineering, Vol. 35(6), pp. 565–578.

16. Zaborac, J., Athanasiou, A., Salamone, S., Bayrak, O., Hrynyk, T., (2019). “Crack-Based Shear Strength Assessment of Reinforced Concrete Members Using a Fixed-Crack Continuum Modeling”, Journal of Structural Engineering, Vol. 146(4), 17 pp.

17. Dubuc, B., Ebrahimkhanlou, A., Livadiotis, S., Salamone, S., (2019). “Inversion algorithm for Lamb-wave-based depth characterization of acoustic emission sources in plate-like structures”, Ultrasonics, Vol. 99.

18. Ebrahimkhanlou, A., Dubuc, B., Salamone, S., (2019). “A generalizable deep learning framework for localizing and characterizing acoustic emission sources in riveted metallic panels”, Mechanical Systems and Signal Processing, Vol. 130, pp. 248-272. 

19. Livadiotis, S., Ebrahimkhanlou, A., Salamone, S., (2019). “An algebraic reconstruction imaging approach for corrosion damage monitoring of pipelines”, Smart Materials and Structures, Vol. 28, 13 pp. 

20. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2019). “Corrosion monitoring of prestressed concrete structures by using topological analysis of acoustic emission data”, Smart Materials and Structures, Vol. 28, 12 pp. 

21. Ebrahimkhanlou, A., Athanasiou, A., Hrynyk, D.T., Bayrak, O., Salamone, S., (2019). “Fractal and multifractal analysis of crack patterns in prestressed concrete girders”, Journal of Bridge Engineering, in print. 

22. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2018). “The effect of applied stress on the phase velocity of guided waves in anisotropic composite plates”, Journal of Acoustical Society of America, Vol. 142 (6), pp. 3553-3563.

23. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2018). “Computation of propagating and non-propagating guided modes in nonuniformly stressed plates using spectral methods”, Journal of Acoustical Society of America, Vol. 143 (6), pp. 3220-3230. 

24. Ebrahimkhanlou, A., Salamone, S., (2018). “Single-sensor acoustic emission source localization in plate-like structures using deep learning”, Aerospace, Special Issue - selected papers from IWSHM 2017, pp. 1-22. 

25. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2018). “Localization of multiple acoustic emission events occurring closely in time using sparse reconstruction”, Journal Intelligent Material Systems & Structures, Vol. 29 (11), pp. 2362–2373.

26. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2018). “Stress measurement in seven-wire strands using higher order guided ultrasonic wave modes”, Journal of the Transportation Research Record, pp. 1–9. 

27. Delgado D.C., Clayton, P., O'Brien, W.J., Seepersad, C., Juenger, M., Ferron, R., Salamone, S., (2018). “Applications of additive manufacturing in the construction industry – A forward-looking review, Automation in Construction, Vol. 89, pp. 110–119. 

28. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2018). “Higher order longitudinal guided wave modes in axially stressed seven-wire strands”, Ultrasonics, Vol. 84, pp.382-391. 

29. Ebrahimkhanlou, A., Salamone, S., (2017). “Acoustic emission source localization in thin metallic plates: a single-sensor approach based on edge reflections”, Ultrasonics, Vol. 78, pp. 134-145.

30. Ebrahimkhanlou, A., Salamone, S., (2017). “A probabilistic framework for single-sensor acoustic emission source localization in thin metallic plates”, Smart Material and Structures, Vol. 26, 095026, 19 pp.

31. Dubuc, B., Ebrahimkhanlou, A., Salamone, S., (2017). “Effect of pressurization on helical guided wave energy velocity in fluid-filled pipes”, Ultrasonics, Vol. 75, pp.145-154.

32. Ebrahimkhanlou, A., Dubuc, B., Salamone, S., (2016). “Damage localization in metallic plate structures using edge-reflected lamb waves”, Smart Materials and Structures, Vol. 25, 085035, 13 pp.

33. Dehghan Niri, E., Salamone, S., (2016). “Quantitative corrosion imaging of pipelines using multi helical guided ultrasonic waves”, Structural Monitoring and Maintenance: an international journal, Vol.3 (3).

34. Matovu, M., Farhidzadeh, A., Salamone, S., (2016). “Damage assessment of steel-plate concrete composite walls by using infrared thermography: a preliminary study”, Journal of Civil Structural Health Monitoring, Vol. 6(2), pp.303-313.

35. Ebrahimkhanlou, A., Farhidzadeh, A., Salamone, S., (2016). “Multifractal analysis of crack patterns in reinforced concrete shear walls”, Structural Heath Monitoring, Vol. 15(1), pp.81-92.

36. Ercolino M., Farhidzadeh, A., Salamone, S., Magliulo, G., (2015). “Detection of onset of failure in prestressed strands by cluster analysis of acoustic emissions”, Structural Monitoring and Maintenance: an international journal, Vol.2 (4).

37. Farhidzadeh, A., Epackachi, S., Salamone, S., Whittaker, A., (2015). “Bayesian decision and mixture models for ae monitoring steel-concrete composite shear walls”, Smart Materials and Structures, Vol. 24, 115018, 11 pp.

38. Farhidzadeh, A., Salamone, S., (2015). “Reference-free corrosion damage diagnosis in steel strands using guided ultrasonic waves”, Ultrasonics, Vol. 57(3), pp.198-208.

39. Dehghan Niri, E., Farhidzadeh, A., Salamone, S., (2015). “Determination of the probability zone for acoustic emission source location in cylindrical shell structures”, Mechanical Systems and Signal Processing, Vol. 60, pp. 971-985.

40. Dehghan Niri, E., Salamone, S., (2015). “A multi-helical ultrasonic imaging approach for the structural health monitoring of cylindrical structures”, Structural Health Monitoring, Vol. 14(1), pp.73-85.

41. Farhidzadeh, A., Dehghan Niri, E., Zhong, Z., Salamone, S., Aref, A., Filiatrault, A., (2014). “Post-earthquake evaluation of pipelines rehabilitated with cured in place lining technology using acoustic emission”, Construction & Building Materials, Vol.54, pp.326-338.

42. Moustafa, A., Dehghan Niri, E., Farhidzadeh, A., Salamone, S., (2014). “Corrosion monitoring of post-tensioned concrete structures using fractal analysis of guided ultrasonic waves”, Structural Control and Health Monitoring, Vol. 21(3), pp. 438-448.

43. Dehghan Niri, E., Farhidzadeh, A., Salamone, S., (2014). “Nonlinear kalman filtering for acoustic emission source localization in anisotropic panels”, Ultrasonics, Vol. 54(2), pp. 486-501.

44. Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I., Al-Nazer, L., (2013).”Ultrasonic tomography for three-dimensional imaging of internal rail flaws: proof-of-principle numerical simulations”, Journal of the Transportation Research Board, Vol.2374, pp.162-168.

45. Farhidzadeh, A., Dehghan Niri, E., Moustafa, A., Salamone, S., Whittaker, A., (2013). “Damage assessment of reinforced concrete structures using fractal analysis of residual crack patterns”, Experimental Mechanics, Vol. 53(9), pp. 1607-1619.

46. Farhidzadeh, A., Salamone, S., Singla, P., (2013). “A probabilistic approach for damage identification a crack mode classification in reinforced concrete structures”, Journal Intelligent Material Systems & Structures, Vol. 24(14), pp.1722-1735.

47. Dehghan Niri, E., Farhidzadeh, A., Salamone, S., (2013). “Adaptive multisensor data fusion for acoustic emission (AE) source localization in noisy environment”, Structural Heath Monitoring, Vol. 12(1), pp.59-77. 

48. Farhidzadeh, A., Salamone, S., Luna, B., Whittaker, A., (2013). “Acoustic emission monitoring of a reinforced concrete shear wall by b-value based outlier analysis”, Structural Heath Monitoring, Vol. 12(1), pp. 3-13. 

49. Farhidzadeh, A., Dehghan Niri, E., Salamone, S., Luna, B., Whittaker, A., (2013). “Monitoring crack propagation in reinforced concrete shear walls by acoustic emission”, Journal of Structural Engineering, Vol. 139(12), 04013010.

50. Dehghan Niri, E., Salamone, S., (2012). “Passively tunable mechanism for dual bimorph energy harvester with variable tip stiffness and axial load”, Smart Materials and Structures, Vol. 21(12), 125025, 15 pp.

51. Dehghan Niri, E., Salamone, S., (2012). “A probabilistic framework for acoustic emission source localization in plate-like structures”, Smart Materials and Structures, Vol. 21(3), 035009, 16 pp. 

52. Moustafa, A., Salamone, S., (2012). “Fractal dimension based Lamb wave tomography algorithm for damage detection in plate-like structures”, Journal Intelligent Material Systems & Structures, Vol. 23, pp. 1269-1276.

53. Marzani, A., Salamone, S., (2012). “Numerical prediction and experimental verification of temperature effect on plate waves generated and received by piezoceramic sensors”, Mechanical Systems and Signal Processing, Vol.30, pp.204-217.

54. Salamone, S., Veletzos, M.J, Lanza di Scalea, F., Restrepo. J.I., (2012). “Detection of initial yield and onset of failure in bonded post-tensioned concrete beams”, Journal of Bridge Engineering, Vol. 17(6), pp.966-974 (SPECIAL ISSUE: Nondestructive Evaluation and Testing for Bridge Inspection and Evaluation).

55. Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F., (2011). “Use of interwire ultrasonic leakage to quantify loss of prestress in multiwire tendons”, Journal of Engineering Mechanics, Vol. 137(5), pp: 324–334.

56. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., Lanza di Scalea, F., (2011). “Health monitoring of prestressing tendons in post-tensioned concrete bridges”, Journal of the Transportation Research Record, Vol. 2220, pp: 21–27.

57. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M., Carr, G., (2011). “Noncontact ultrasonic guided-wave system for rail inspection”, Journal of the Transportation Research Record, Vol. 2261, pp: 143–147.

58. Coccia, S., Bartoli, I., Marzani, A., Lanza di Scalea, F., Salamone, S., Fateh, M., (2011). “Numerical and experimental study of guided waves for detection of defects in the rail head”, NDT&E International, Vol. 44(1), pp: 93–100.

59. Salamone, S., Bartoli, I., Di Leo, P., Lanza di Scalea, F., Ajovalasit, A., D'Acquisto, L., Rhymer, J., Kim, H., (2010). “High velocity impact location on aircraft panels using macro fiber composite piezoelectric rosettes”, Journal of Intelligent Material Systems and Structures, Vol. 21(9), pp: 887–896

60. Srivastava, A., Bartoli, I., Salamone, S., Lanza di Scalea, F., (2010). “Higher harmonic generation in nonlinear waveguides of arbitrary cross-section”, Journal of the Acoustical Society of America, Vol. 127(5), pp: 2790–2796.

61. Rizzo, P., Cammarata, M., Bartoli, I., Lanza di Scalea, F., Salamone, S., Coccia, S., and Phillips, R., (2010). “Ultrasonic guided waves-based monitoring of rail head: laboratory and field tests”, Advances in Civil Engineering, Vol.2010 (ID.291293).

62. Salamone, S., Lanza di Scalea, F., Bartoli, I., Coccia, S., (2009). “Guided-wave health monitoring of aircraft composite panels under changing temperature”, Journal of Intelligent Material Systems and Structures, Vol. 20(9), pp: 1079–1090.

63. Salamone, S., Fasel, T., Bartoli, I., Srivastava, A., Lanza di Scalea, F., Todd, M., (2009). “Health monitoring approach for adhesively bonded joints”, Materials Evaluation, Vol. 67(7), pp: 828–836.

64. Coccia, S., Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F., Fateh, M., (2009). “Non-contact ultrasonic guided wave detection of rail defects”, Transportation Research Record: Journal of the Transportation Research Board, Vol. 2117, pp: 77–84.

65. Bilello, C., Di Paola, M., Salamone, S., (2008). “A correction method for the analysis of continuous linear one-dimensional systems under moving loads”, Journal of Sound and Vibration, Vol. 315, pp: 226–238.

66. Cottone, G., Pirrotta, A., Salamone, S., (2008). “Incipient damage identification through characteristics of the analytical signal response”, Structural Control and Health Monitoring, Vol. 15(8), pp: 1122-1142.

67. Lanza di Scalea, F., Salamone, S., (2008). “Temperature effects in ultrasonic Lamb wave structural health monitoring systems”, Journal of the Acoustical Society of America, Vol. 124(1), pp: 161–174.

68. Salamone, S., Bartoli, I., Lanza di Scalea, F., Coccia, S., (2008). “Temperature effect on guided wave based macrofiber composite transduction”, Materials Evaluation, Vol. 66(10), pp: 1071–1076.

69. Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F., Coccia, S., Sikorsky, C., (2008). “Monitoring pre-stress level in seven wire prestressing tendons by inter wire ultrasonic wave propagation”, Journal of Advances in Science and Technology–Embodying Intelligence in Structures and Integrated Systems, Vol. 56, pp: 200–205. 

70. Bilello, C., Di Paola, M., Salamone, S., (2005). “A correction method for dynamic analysis of linear continuous systems”, Computer and Structures, Vol. 83, pp: 662–670.