Khan M.A., Mitra S., “Modifying volumetric adsorption setup for combined measurement of adsorption heat and uptake”, Measurement, vol. 258, Art. no. 119138, 2026, doi: 10.1016/j.measurement.2025.119138.
Mandal S., Raheem S., Mitra S., “Thermodynamic assessment of vapor compression refrigeration driven atmospheric water harvesting technologies”, Thermal Science and Engineering Progress, vol. 68, Art. no. 104383, 2025, doi: 10.1016/j.tsep.2025.104383.
Khan M.A., Mitra S., “Identifying consistent adsorption isotherm equation for water vapour/MIL-101(Cr) pair using calorimetric measurements”, International Communications in Heat and Mass Transfer, vol. 168, Art. no. 109443, 2025, doi: 10.1016/j.icheatmasstransfer.2025.109443.
Raheem S., Mitra S., “Theoretical and numerical studies on effect of silica gel bed thickness for atmospheric water harvesting application”, Applied Thermal Engineering, vol. 275, Art. no. 126839, 2025, doi: 10.1016/j.applthermaleng.2025.126839.
Khan M.A., Mitra S., “Enhancing Atmospheric Water Harvesting: A Comparative Study of Water Vapor Adsorption on Material Institute Lavoisier-101(Cr), Metal-Organic Framework-801 and Regular Density- Silica Gel”, Heat Transfer Engineering, 2025, doi: 10.1080/01457632.2025.2553979.
Khan M.A., Thu K., Mitra S., “Experimental evaluation of Adsorption Heat for Water vapour/Silica gel pair for chiller application”, Applied Thermal Engineering, vol. 249, Art. no. 123289, 2024, doi: 10.1016/j.applthermaleng.2024.123289.
Saren S., Mitra S., Miksik F., Miyazaki T., Ng K.C., Thu K., “Investigating maximum temperature lift potential of the adsorption heat transformer cycle using IUPAC classified isotherms”, International Journal of Heat and Mass Transfer, vol. 225, Art. no. 125384, 2024, doi: 10.1016/j.ijheatmasstransfer.2024.125384.
Mishra V.K., Dasthagiri P., Kumar E.A., Mitra S., “Simulation study of R134a based vapour compression-adsorption hybrid chiller with activated carbon as adsorbent”, Thermal Science and Engineering Progress, vol. 45, Art. no. 102086, 2023, doi: 10.1016/j.tsep.2023.102086.
Saren S., Mitra S., Miksik F., Miyazaki T., Ng K.C., Thu K., “Impacts of the internal heat recovery scheme on the performance of an adsorption heat transformer cycle for temperature upgrade”, International Communications in Heat and Mass Transfer, vol. 144, Art. no. 106774, 2023, doi: 10.1016/j.icheatmasstransfer.2023.106774.
Saren S., Mitra S., Miyazaki T., Ng K.C., Thu K., “Adsorption heat transformer cycle using multiple adsorbent + water pairs for waste heat upgrade”, Journal of Thermal Analysis and Calorimetry, vol. 148, no. 8, pp. 3059-3071, 2023, doi: 10.1007/s10973-022-11350-3.
Saren S., Mishra V.K., Thu K., Mitra S., “Scaling analysis of large pressure jump driven adsorption of water vapour in columnar porous silica gel bed”, International Communications in Heat and Mass Transfer, vol. 135, Art. no. 106101, 2022, doi: 10.1016/j.icheatmasstransfer.2022.106101.
Saren S., Mitra S., Miyazaki T., Ng K.C., Thu K., “A novel hybrid adsorption heat transformer - multi-effect distillation (AHT-MED) system for improved performance and waste heat upgrade”, Applied Energy, vol. 305, Art. no. 117744, 2022, doi: 10.1016/j.apenergy.2021.117744.
Islam M.A., Mitra S., Thu K., Saha B.B., “Study on thermodynamic and environmental effects of vapor compression refrigeration system employing first to next-generation popular refrigerants”, International Journal of Refrigeration, vol. 131, pp. 568-580, 2021, doi: 10.1016/j.ijrefrig.2021.08.014.
Rupa M.J., Pal A., Mitra S., Saha B.B., “Time adapted linear driving force model for gas adsorption onto solids”, Chemical Engineering Journal, vol. 420, Art. no. 129785, 2021, doi: 10.1016/j.cej.2021.129785.
Manila M.R., Mitra S., Dutta P., “Studies on dynamics of two-stage air cooled water/silica gel adsorption system”, Applied Thermal Engineering, vol. 178, Art. no. 115552, 2020, doi: 10.1016/j.applthermaleng.2020.115552.
Pal A., Kondor A., Mitra S., Thu K., Harish S., Saha B.B., “On surface energy and acid-base properties of highly porous parent and surface treated activated carbons using inverse gas chromatography”, Journal of Industrial and Engineering Chemistry, vol. 69, pp. 432-443, 2019, doi: 10.1016/j.jiec.2018.09.046.
Palash M.L., Mitra S., Harish S., Thu K., Saha B.B., “An approach for quantitative analysis of pore size distribution of silica gel using atomic force microscopy”, International Journal of Refrigeration, vol. 105, pp. 72-79, 2019, doi: 10.1016/j.ijrefrig.2018.08.017.
Younes M.M., El-sharkawy I.I., Kabeel A.E., Uddin K., Pal A., Mitra S., Thu K., Saha B.B., “Synthesis and characterization of silica gel composite with polymer binders for adsorption cooling applications”, International Journal of Refrigeration, vol. 98, pp. 161-170, 2019, doi: 10.1016/j.ijrefrig.2018.09.003.
Berdenova B., Pal A., Muttakin M., Mitra S., Thu K., Saha B.B., Kaltayev A., “A comprehensive study to evaluate absolute uptake of carbon dioxide adsorption onto composite adsorbent”, International Journal of Refrigeration, vol. 100, pp. 131-140, 2019, doi: 10.1016/j.ijrefrig.2019.01.014.
Uddin K., Islam M.A., Mitra S., Lee J.-B., Thu K., Saha B.B., Koyama S., “Specific heat capacities of carbon-based adsorbents for adsorption heat pump application”, Applied Thermal Engineering, vol. 129, pp. 117-126, 2018, doi: 10.1016/j.applthermaleng.2017.09.057.
Azahar F.H.M., Mitra S., Yabushita A., Harata A., Saha B.B., Thu K., “Improved model for the isosteric heat of adsorption and impacts on the performance of heat pump cycles”, Applied Thermal Engineering, vol. 143, pp. 688-700, 2018, doi: 10.1016/j.applthermaleng.2018.07.131.
Thu K., Mitra S., Saha B.B., Srinivasa Murthy S., “Thermodynamic feasibility evaluation of hybrid dehumidification - mechanical vapour compression systems”, Applied Energy, vol. 213, pp. 31-44, 2018, doi: 10.1016/j.apenergy.2018.01.024.
Mitra S., Muttakin M., Thu K., Saha B.B., “Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics”, Applied Thermal Engineering, vol. 133, pp. 764-773, 2018, doi: 10.1016/j.applthermaleng.2018.01.015.
Muttakin M., Mitra S., Thu K., Ito K., Saha B.B., “Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms”, International Journal of Heat and Mass Transfer, vol. 122, pp. 795-805, 2018, doi: 10.1016/j.ijheatmasstransfer.2018.01.107.
Pal A., Thu K., Mitra S., El-Sharkawy I.I., Saha B.B., Kil H.-S., Yoon S.-H., Miyawaki J., “Study on biomass derived activated carbons for adsorptive heat pump application”, International Journal of Heat and Mass Transfer, vol. 110, pp. 7-19, 2017, doi: 10.1016/j.ijheatmasstransfer.2017.02.081.
Pal A., Kil H.-S., Mitra S., Thu K., Saha B.B., Yoon S.-H., Miyawaki J., Miyazaki T., Koyama S., “Ethanol adsorption uptake and kinetics onto waste palm trunk and mangrove based activated carbons”, Applied Thermal Engineering, vol. 122, pp. 389-397, 2017, doi: 10.1016/j.applthermaleng.2017.04.099.
Mitra S., Thu K., Saha B.B., Srinivasan K., Dutta P., “Modeling study of two-stage, multi-bed air cooled silica gel + water adsorption cooling cum desalination system”, Applied Thermal Engineering, vol. 114, pp. 704-712, 2017, doi: 10.1016/j.applthermaleng.2016.12.011.
Pal A., Shahrom M.S.R., Moniruzzaman M., Wilfred C.D., Mitra S., Thu K., Saha B.B., “Ionic liquid as a new binder for activated carbon based consolidated composite adsorbents”, Chemical Engineering Journal, vol. 326, pp. 980-986, 2017, doi: 10.1016/j.cej.2017.06.031.
Mitra S., Thu K., Saha B.B., Dutta P., “Performance evaluation and determination of minimum desorption temperature of a two-stage air cooled silica gel/water adsorption system”, Applied Energy, vol. 206, pp. 507-518, 2017, doi: 10.1016/j.apenergy.2017.08.198.
Thu K., Saha B.B., Mitra S., Chua K.J., “Modeling and Simulation of Mass Recovery Process in Adsorption System for Cooling and Desalination”, Energy Procedia, vol. 105, pp. 2004-2009, 2017, doi: 10.1016/j.egypro.2017.03.574.
Mitra S., Thu K., Saha B.B., Dutta P., “Modeling the Effect of Heat Source Temperature on the Performance of Two-stage Air Cooled Silica Gel + Water Adsorption System”, Energy Procedia, vol. 105, pp. 2010-2015, 2017, doi: 10.1016/j.egypro.2017.03.575.
Mitra S., Srinivasan K., Kumar P., Dutta P., “Silica gel + water adsorber chiller and desalination system: A transient heat transfer study”, Journal of Thermal Science and Engineering Applications, vol. 8, no. 2.0, Art. no. 21014, 2016, doi: 10.1115/1.4032007.
Mitra S., Kumar P., Srinivasan K., Dutta P., “Development and performance studies of an air cooled two-stage multi-bed silica-gel + water adsorption system”, International Journal of Refrigeration, vol. 67, pp. 174-189, 2016, doi: 10.1016/j.ijrefrig.2015.10.028.
Mitra S., Aswin N., Dutta P., “Scaling analysis and numerical studies on water vapour adsorption in a columnar porous silica gel bed”, International Journal of Heat and Mass Transfer, vol. 95, pp. 853-864, 2016, doi: 10.1016/j.ijheatmasstransfer.2015.12.011.
Mitra S., Kumar P., Srinivasan K., Dutta P., “Instrumentation and control of a two-stage 4-bed silica gel + water adsorption cooling cum desalination system”, Measurement, vol. 79, pp. 29-43, 2016, doi: 10.1016/j.measurement.2015.10.014.
Singh M.K., Yadav D., Arpit S., Mitra S., Saha S.K., “Effect of nanofluid concentration and composition on laminar jet impinged cooling of heated steel plate”, Applied Thermal Engineering, vol. 100, pp. 237-246, 2016, doi: 10.1016/j.applthermaleng.2016.01.032.
Jaiswal A.K., Mitra S., Dutta P., Srinivasan K., Srinivasa Murthy S., “Influence of cycle time and collector area on solar driven adsorption chillers”, Solar Energy, vol. 136, pp. 450-459, 2016, doi: 10.1016/j.solener.2016.07.023.
Mitra S., Kumar P., Srinivasan K., Dutta P., “Performance evaluation of a two-stage silica gel + water adsorption based cooling-cum-desalination system”, International Journal of Refrigeration, vol. 58, pp. 186-198, 2015, doi: 10.1016/j.ijrefrig.2015.06.018.
Mitra S., Oh S.T., Saha B.B., Dutta P., Srinivasan K., “Simulation study of the adsorption dynamics of cylindrical silica gel particles”, Heat Transfer Research, vol. 46, no. 2.0, pp. 123-140, 2015, doi: 10.1615/HeatTransRes.2014007318.
Mitra S., Kumar P., Srinivasan K., Dutta P., “Simulation study of a two-stage adsorber system”, Applied Thermal Engineering, vol. 72, no. 2.0, pp. 283-288, 2014, doi: 10.1016/j.applthermaleng.2014.04.023.
Mitra S., Srinivasan K., Kumar P., Murthy S.S., Dutta P., “Solar driven Adsorption Desalination system”, Energy Procedia, vol. 49, pp. 2261-2269, 2014, doi: 10.1016/j.egypro.2014.03.239.
Mitra S., Saha S.K., Chakraborty S., Das S., “Study on boiling heat transfer of water-TiO2 and water-MWCNT nanofluids based laminar jet impingement on heated steel surface”, Applied Thermal Engineering, vol. 37, pp. 353-359, 2012, doi: 10.1016/j.applthermaleng.2011.11.048.
Khan M.A., Raheem S., Mitra S., “Investigating Dynamic Adsorption-Desorption Kinetics for the Optimal Design of Adsorption Heat Exchangers”, Proceedings of the 11th Thermal and Fluids Engineering Conference (TFEC), 2026.
Raheem S., Mitra S., “Numerical Analysis of Adsorption-Desorption Dynamics in a Compact Silica gel based Atmospheric Water Harvesting System”, Proceedings of the 11th Thermal and Fluids Engineering Conference (TFEC), 2026.
Khan M.A., Mitra S., “Kinetic Study of the Water/MIL-101(Cr) Pair under Adsorption Chiller Operating Conditions: Influence of Adsorbent Layer Height”, Proceedings of the 17th International Conference on Applied Energy (ICAE), 2025.
Raheem S., Mitra S., “Numerical Investigation of Adsorbent Height Effect in Adsorption Cooling Systems Employing Ethanol and R134a”, Proceedings of the 28th National and 6th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), 2025.
Nanda S., Mitra S., “The effect of varying operating pressures on sCO2 flow in a miniaturized multi-channel heat exchanger”, Proceedings of the 28th National and 6th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), 2025.
Nanda S., Mitra S., “A comparative numerical study on heat transfer analysis between single-channel-type large diameter heat exchanger with that of multi-channel-type small hydraulic diameter heat exchanger using Super-critical CO2”, Proceedings of the 16th International Conference on Applied Energy (ICAE2024), 2024, doi: 10.46855/energy-proceedings-11558.
Mishra VK., Nanda S., Mitra S., “Novel operational strategy for operating a hybrid mechanical compression and adsorption based chiller”, Proceedings of the 16th International Conference on Applied Energy (ICAE2024), 2024, doi: 10.46855/energy-proceedings-11557.
Vingelsgård E., Tolstorebrov I., Widell K.N., Mitra S., Maddali R., Eikevik T.M., “Small-scale solar-based adsorption ice maker for Indian climate”, Proceedings of the 14th IIR-Gustav Lorentzen Conference on Natural Refrigerants - GL2020, 2020, doi: 10.18462/iir.gl.2020.1111.
Mitra S., Pal A., Thu K., Saha B.B., “Transient numerical study of novel composite adsorbent for cooling applications”, Proceedings of the Thermal and Fluids Engineering Conference, 2017, doi: 10.1615/TFEC2017.aes.018467.
Pal A., Mitra S., Thu K., Jribi S., Saha B.B., “Enhanced CO2 adsorption onto biomass based activated carbon”, Proceedings of the International Sorption Heat Pump Conference (ISHPC), 2017.
Pal A., Saha B.B., Kil H.S., Miyawaki J., Yoon S.H., Mitra S., Thu K., Miyazaki T., Koyama S., “Adsorption uptake of ethanol onto WPT and Mangrove-derived ACs”, Proceedings of the 4th International Symposium on Innovative Materials for Processes in Energy Systems (IMPRES), 2016.
Mitra S., Thu K., Saha B.B., Dutta P., “Modeling the effect of heat source temperature on the performance of two-stage air cooled silica gel + water adsorption system”, Proceedings of the 8th International Conference on Applied Energy (ICAE), 2016.
Thu K., Saha B.B., Mitra S., Chua K.J., “Modeling and simulation of mass recovery process in adsorption system for cooling and desalination”, Proceedings of the 8th International Conference on Applied Energy (ICAE), 2016.
Jaiswal A.K., Mitra S., Srinivasa Murthy S., Srinivasan K., Dutta P., “Dynamics of Solar Powered Silica gel + water adsorption chiller”, Proceedings of the 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, 2015.
Jaiswal A.K., Mitra S., Srinivasan K., Srinivasa Murthy S., Dutta P., “Air Cooled Solar Driven Silica gel + Water Adsorption Chiller”, Proceedings of the International Conference on Aerospace and Mechanical Engineering (ICAME 2015), 2015.
Mitra S., Kumar P., Srinivasan K., Dutta P., “Water + silica gel adsorber chiller and desalination system: a transient heat transfer study”, Proceedings of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, 2013.
Mitra S., Kumar P., Srinivasan K., Srinivasa Murthy S., Dutta P., “Solar driven adsorption desalination system”, Proceedings of Solar PACES, 2013.
Mitra S., Srinivasan K., Kumar P., Dutta P., “Simulation study of a two-stage adsorber system”, Proceedings of the 3rd International Symposium on Innovative Materials for Processes in Energy Systems (IMPRES 2013), 2013.
Mitra S., Murlidhara, Vasa N.J., Singaperumal M., “Investigation on particle generation by micro-electro discharge machining”, Proceedings of SPIE Photonics West, 2010, doi: 10.1117/12.845709.
Khan M.A., Mitra S., “Measurement of heat of adsorption as a framework for identifying consistent isotherm equation”, Gas-Solid Adsorption Thermodynamics, pp. 253-288, 2025, doi: 10.1016/B978-0-443-29815-8.00006-9.
Chakraborty S., Mitra S., Bandopadhyay A., “Fluid Mechanics and Hydraulic Machinery”, 2nd year Diploma level book as per AICTE model curriculum, AICTE, 2024 (available online on https://ekumbh.aicte-india.org/dbook.php).
Roy R., Umamahesh B., Mitra S., “Theoretical Investigations on Thermodynamic and Environmental Properties of Zeotropic Mixtures of Carbon Dioxide and Hydrofluoroolefins”, Advancing Sustainable Engineering Through Next-Generation Thermo-Fluid Systems, pp. 381-402, 2025, doi: 10.4018/979-8-3373-3621-3.ch016.
Boddepalli U., Roy R., Mitra S., Maddali R., “Evaluation of Low GWP Hydrocarbons-CO2 Blends for Refrigeration Applications”, Advancing Sustainable Engineering Through Next-Generation Thermo-Fluid Systems, pp. 125-148, 2025, doi: 10.4018/979-8-3373-3621-3.ch007.
Mitra S., Dutta P., Saha B.B., “Scaling of heat and mass transfer processes in adsorption column”, Advances in Heat Transfer, vol. 56, pp. 319-354, 2023, doi: 10.1016/bs.aiht.2023.05.007.