Lathe Controller
Lathe Controller
Embedded Files
Standard Type 6 Series
Standard Type 6 Series
The basic 6 Series controller is specially designed for 2~4-axis lathe applications. It can be equipped with a variety of panel configurations and has complete and practical lathe functions.
Supports Yaskawa M3 bus communication control method, greatly reducing wiring costs and space requirements, and improving cost performance. The 6 series system does not support new generation spindle drives and can be used with new generation axial drives and third-party spindle drives.
1.Mainly designed for lathe with 2~4 axis
2.Complete and practical functions of lathe
3.Able to equipped with variable control panels
Standard Type 6 Series
Standard Type 6 Series
-Support Yaskawa serial bus communication
-Lower the distributon power cost
-Space saver
-Higher cost performance
Turning and milling
Turning and milling
21 series (bus)
21 series (bus)
The 21 Series controller is equipped with Yaskawa Mechatrolink-II/III bus communication control method, which improves the wiring and scalability problems of traditional pulse-type general-purpose controllers, making the system simpler, more scalable, and easier to assemble.
Type : 21TA-E,21TB-E
Type : 21TA-E,21TB-E
Equipped with the Yaskawa bus communication control method, it improves the wiring and scalability problems of traditional pulse-type general-purpose controllers, making the system simpler, more scalable, and easier to assemble.
Equipped with the Yaskawa bus communication control method, it improves the wiring and scalability problems of traditional pulse-type general-purpose controllers, making the system simpler, more scalable, and easier to assemble.
High-performance products supporting M3 serial communication
High-performance products supporting M3 serial communication
The new generation 21 series controller supports Yaskawa Mechatrolink-II/Mechatrolink-III serial communication servo system. The communication bandwidth is greatly increased to 100Mbps, and the resolution can be supported up to 24 bits, effectively improving the smoothness of processing.
The serial communication control method has simple wiring, high scalability, and strong anti-interference ability. Compared with general pulse control, it can improve the flexibility and reliability of the overall system.
Turning and milling
Turning and milling
22 PLUS series (tandem)
22 PLUS series (tandem)
The 22PLUS series controller is equipped with Yaskawa serial communication control method, which improves the timing problems of traditional pulse-type general-purpose controllers in multi-axis motion control, providing good synchronous control and taking into account timeliness.
Type : 22TA, 22TB
Type : 22TA, 22TB
Newly designed new generation controller
Newly designed new generation controller
New appearance design, open bus servo communication, supporting Mechatrolink 3 and EtherCAT, focusing on the pursuit of higher reliability
New appearance design, open bus servo communication, supporting Mechatrolink 3 and EtherCAT, focusing on the pursuit of higher reliability
Provide various servo products required for machine tools
Provide various servo products required for machine tools
Can be used with a variety of servo applications to meet variou
High-speed spindle positioning function
High-speed spindle positioning function
After enabling high-speed spindle positioning, the spindle can be positioned directly at any angle from high-speed rotation, increasing indexing efficiency.
*Software version: 10.116.24 or above; new generation spindle driver version 1.4.2 or above
After enabling high-speed spindle positioning, the spindle can be positioned directly at any angle from high-speed rotation, increasing indexing efficiency.
*Software version: 10.116.24 or above; new generation spindle driver version 1.4.2 or above
Optimization of drilling and tapping retraction actions
Optimization of drilling and tapping retraction actions
After setting the overlapping distance, the G00 idle time can be shortened and the processing efficiency can be optimized.
*Software version: 10.116.54 or above
After setting the overlapping distance, the G00 idle time can be shortened and the processing efficiency can be optimized.
*Software version: 10.116.54 or above
High speed thru hole -3-Jaw
High speed thru hole -3-Jaw
WEDGE-HOOK type 3-jaw with the large through-hole.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut.
High speed thru hole - 2 -Jaw
High speed thru hole - 2 -Jaw
WEDGE-HOOK type 2-jaw with the through-hole.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut.
If not notified, AUTOGRIP will adopt the K Default as K value.
K is the maximum thread specification and it could be customize
High speed thru hole - 4 -Jaw
High speed thru hole - 4 -Jaw
WEDGE-HOOK type is 4-jaw with the through-hole.
4-jaw chuck has four holes for controlling each jaw, one at a time.
4 jaw lathe chucks move independently and require operators to center the workpiece.
four jaw lathe chuck is mainly used for gripping square or octagon blocks.
4 jaw power chuck with an accuracy level between 0 and 0.001.
Matching surfaces of all parts hardened, ground, and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of the blank draw nut.
If not notified, AUTOGRIP will adopt the K Default as the K value.
K is the maximum thread specification and it could be customized
High speed non-thru hole -2-Jaw
High speed non-thru hole -2-Jaw
WEDGE-HOOK type two jaw power chuck.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
High speed non-thru hole - 3 -Jaw
High speed non-thru hole - 3 -Jaw
WEDGE-HOOK type 3-jaw power chuck.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
High speed non-thru hole - 3 -Jaw
High speed non-thru hole - 3 -Jaw
WEDGE-HOOK type 3-jaw lathe chuck.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
3P-03：WEDGE-HOOK type 3-jaw mini lathe chuck, and suitable for bench lathe.
2H-2/2H-2A
2H-2/2H-2A
LARGE THRU-HOLE POWER CHUCK
LARGE THRU-HOLE | 2-JAW
WEDGE-HOOK type 2-jaw with the extra large through-hole.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut,
4H-2/4H-2A
4H-2/4H-2A
LARGE THRU-HOLE POWER CHUCK
LARGE THRU-HOLE | 4-JAW
WEDGE-HOOK type 4-jaw with the extra large through-hole.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut,
If not notified, Autogrip will adopt the K Default as K value.
K max is the maximum thread specification, and it could be customize.
3H-2/3H-2A
3H-2/3H-2A
LARGE THRU-HOLE POWER CHUCK
LARGE THRU-HOLE | 3-JAW
WEDGE-HOOK type 3-jaw with the extra large through-hole.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut,
If not notified, Autogrip will adopt the K Default as K value.
K max is the maximum thread specification, and it could be customize..
3L/3L-A
3L/3L-A
CRANK type Extra Long Stroke Thru-Hole 3-Jaw Power Chuck
Thru-Hole | Three JAW CHUCK
Our 3 jaw lathe chuck is widely used for Lathes and milling machines, it is best for holding and rotating the workpiece during machining operations such as turning, thread cutting, facing, boring, drilling, grinding, and parting.
Crankshaft three jaw lathe chuck with the large through-hole, and extra-long jaw stroke.
3 jaw power chuck has the same self-centering chuck, its jaws are interconnected via a scroll gear and can move at the same time.
Matching surfaces of all parts hardened, ground, and lubricated directly.
High rigidity and high repeatability precision.
three jaw chuck is the best option for holding circular or hexagonal cross-sections
3 jaw lathe chuck with an accuracy level of around 0.010
J is the hole diameter of the blank draw nut, K is the maximum thread specification, and it could be customized.
1L
1L
Extra Long Jaw Stroke Power Chuck
Non-Thru-Hole | 1-JAW
WEDGE-HOOK type 3-jaw with the extra large through-hole.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut,
If not notified, Autogrip will adopt the K Default as K value.
K max is the maximum thread specification, and it could be customize..
2L/2L-A
2L/2L-A
CRANK type 2-Jaw Extra Long Jaw Stroke Thru-Hole Power Chuck
Thru-Hole | 2-JAW
CRANK type 2-jaw with the large through-hole, and extra long jaw stroke.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
J is the hole diameter of blank draw nut, K is the maximum thread specification, and it could be customize.
3M
3M
WEDGE-HOOK type 3-Jaw Long Jaw Stroke Power Chuck
Non-Thru-Hole | 3-JAW
WEDGE-HOOK type 3-jaw power chuck, and long jaw stroke.
Matching surfaces of all parts hardened, ground and lubricated directly.
High rigidity and high repeatability precision.
2M
2M
WEDGE-HOOK type Long Stroke 2 Jaw Lathe Chuck
Non-Thru-Hole | Two JAW CHUCK
2M 2 jaw chuck is a device used in machining and turning operations to hold and secure a workpiece on a lathe or similar machine tool. It is called a "two-jaw" chuck because it consists of two jaws that can be adjusted to grip and center the workpiece.
Key features and functions of AUTOGRIP® 2 jaw lathe chuck:
The primary function of a 2 jaw power chuck is to securely grip the workpiece. The jaws of the chuck can be adjusted independently to hold the workpiece with a firm and concentric grip.
WEDGE-HOOK type two jaw chuck, and long jaw stroke.
Matching surfaces of all parts hardened, ground, and lubricated directly.
High rigidity and high repeatability precision.
Deliver up to 20% more speed, gripping force, and bore size when compared to conventional chucks.
Allowing for rapid removal and replacement of workpieces. This feature saves time and enhances efficiency in machining processes.
Can be flipped around to accommodate different types and sizes of workpieces which increases flexibility and adaptability when machining various parts.
3V-A
3V-A
Power Chuck for Vertical Lathe
Non-Thru-Hole | 3-JAW
WEDGE-HOOK type 3-jaw high speed power chuck.
Sealed against swarf, chips and coolant, suitable for vertical lathe.
For models above type 40,sealed against swarf, chips and coolant, suitable for vertical lathe.
4V-A
4V-A
Power Chuck for Vertical Lathe
Non-Thru-Hole | 4-JAW
WEDGE-HOOK type 4-jaw high speed power chuck.
With manual radial setting of master jaws for the workpiece centering.
Sealed against swarf, chips and coolant, suitable for vertical lathe.
3HS
3HS
THRU-HOLE FULLY SEALED TYPE POWER CHUCK
Fully sealed type | 3-Jaw THRU-HOLE
Fully sealed design extends maintenance intervals, improving production efficiency.
Sealed design ensures constant lubrication and protects against the ingress of coolant and chips, which guarantees clamping precision and durability.
Suitable for lights-out manufacturing; dry machining of castings and forgings; or when high-pressure coolant is utilized. Especially ideal for vertical lathes.
Media fed through central bore - available for coolant or air. (optional)
3PS
3PS
Fully sealed type lathe chuck
Fully sealed type | 3-Jaw Lathe Chuck
Fully sealed design extends maintenance intervals, improving production efficiency.
3 jaw lathe chuck with sealed design ensures constant lubrication and protects against the ingress of coolant and chips, which guarantees clamping precision and durability.
Suitable for lights-out manufacturing; dry machining of castings and forgings; or when high-pressure coolant is utilized. Especially ideal for vertical lathes.
Media fed through central bore – available for coolant or air (optional).
Standard Soft Jaws
machining soft jaws for cnc lathe chucks
soft jaws can be machined to grip the object around most of its circumference.
lathe soft jaws can use is to hold thin workpieces.
GFS-100
GFS-100
Gripping force sensor
The 2nd generation of AUTOGRIP gripping force sensor .
Stable Bluetooth 5.0 Transmission: Equipped with the latest Bluetooth 5.0 technology, ensuring stability in wireless connections.
Convenient Type-C Charging: Supports Type-C charging for added convenience in recharging.
High-Performance Lithium Battery: Provides a longer-lasting battery life, eliminating concerns about power during work.
Supports Android and iOS: Whether you use Android or iOS systems, the GFS-100 is perfectly compatible, offering a seamless experience.
Configurable for 2-Jaw or 3-Jaw Operation: Based on your specific needs, the GFS-100 can easily be configured for either 2-jaw or 3-jaw operation, providing greater flexibility.
Note: The first-generation gripping force sensor (GFS-100) and the second-generation gripping force sensor (GFS-100) APP are not compatible and cannot be used interchangeably.
iOS System: Apple iOS 16.1.2。Android System: Android version 12
Sleeve MT1 MT2 MT3 MT4 MT5
Remark :
Size :
2-1 (A)
3-1 (A)
3-2 (A)
4-1 (A)
4-2 (A)
4-3 (A)
5-1 (A)
5-2 (A)
5-3 (A)
5-4 (A)
Size explanation:
Outer diameter size MT2 (which goes into the machine) while the inner hole size MT1 (drill bit goes in here)
Sleeve / Drill Joint / Drill Handle / Drill Adapter / Drill Sock functions to enlarge the taper drill handle so that it can fit the machine.
For example, the adapter on the MT2 machine but you want to use a drill (MT 1 drill handle) then you must use the MT2 to MT1 sleeve.
Please ask first "Stock availability first" before ordering
VISE
Vise Up
The UP vise is a bench vise used to clamp work pieces on a drill machine.
Vise cross
Cross vise is a clamping tool that functions to clamp workpieces with three-way settings. Cross vise is often used in the metal industry, such as metal workshops and engineering.
VISE K-Type
A hydraulic vise is a clamping tool that uses a hydraulic system to move and clamp workpieces.
VISE HIDROLIK
A hydraulic vise is a clamping tool that uses a hydraulic system to move and clamp workpieces.
Not all stocks are updated yet, please contact admin for other size requirements.
Page updated
Google Sites
Report abuse