Publications
[2024]
- Muhammad Soban Khan, Mushtaq Ali, Song Ha Lee, Keun Young Jang, Seong Jae Lee, and Jinsoo Park, “Acoustofluidic separation of prolate and spherical micro-objects,” Microsystems & Nanoengineering, 10, 6 (2024).
- Appurva Tiwari, Seong Jae Lee, Dhiraj Kumar Garg, Sehyun Shin, Ashish Kumar Thokchom, “Characterizing the microparticles deposition structure and its photonic nature in surfactant-laden evaporating colloidal sessile droplets,” Langmuir, 40(16), 8711-8720 (2024).
[2023]
- Hyeon Sik Eom, Dong Won Kim, Keun-Soo Jang, and Seong Jae Lee, "Electrical and thermal properties of surface-modified copper nanowire/polystyrene nanocomposites through latex blending," ACS Omega, 8, 46955-46966 (2023).
- Yewon Lee, Seong Hwan Kim, Seong Jae Lee, Joona Bang, and Hyun Wook Jung, "Light-scattering analysis of drying behavior in suspension droplets with silica and polystyrene particles and a hydrosoluble polymer," Langmuir, 39(48), 17222-17231 (2023).
- Yeong Jae Kim, Seung Chang Lee, Hyun Ho Park, Keon-Soo Jang, and Seong Jae Lee, "Electromagnetic interference shielding performance of poly(styrene-co-butyl acrylate)/carbon nanotube nanocomposites fabricated by latex technology," Ind. Eng. Chem. Res., 62, 5015-5023 (2023).
- Song Hee Lee, Hong Hee Shin, Seon Gyeom Kim, and Seong Jae Lee, "Fabrication and characteristics of sulfonated carbon foam via high internal phase emulsions with polypyrrole-modified carbon nanotubes," Polymer, 281, 126144 (2023).
- Appurva Tiwari, Sehyun Shin, Seong Jae Lee, and Ashish Kumar Thokchom, "Understanding the formation of particle bands and fingering patterns during evaporation of a sessile droplet containing colloids," Colloid Interf. Sci. Commun., 56, 100740 (2023).
[2022]
- Song Hee Lee, Ji Hun An, Yeong Jae Kim, and Seong Jae Lee, "Electrically conductive foams from high internal phase emulsions with polypyrrole-modified carbon nanotubes: Morphology, properties, and rheology," Polymer, 242, 124600 (2022).
- Hye Won Jeong, Ju Won Park, Hyang Mi Lee, Kyu Hwan Choi, Seong Jae Lee, Jin Woong Kim, and Bum Jun Park, "Retardation of capillary force between Janus particles at the oil-water interface," J. Phys. Chem. Lett., 13, 10018-10024 (2022).
[2021]
- Tae Gon Kim, Jung Mock Kim, Keon-Soo Jang, and Seong Jae Lee, "Dispersibility-tailored conductive epoxy nanocomposites with silica nanoparticle-embedded silver nanowires," Polymer Testing, 96, 107111 (2021).
- Jae Phil Song, Sung Ho Choi, Dae-Won Chung, and Seong Jae Lee, "Latex-based polystyrene nanocomposites with non-covalently modified carbon nanotubes," Polymers, 13, 1168 (2021).
- Yeong Jae Kim, Sung-Ho Choi, Seong Jae Lee, and Keon-Soo Jang, "Latent curing, chemorheological, kinetic, and thermal behaviors of epoxy resin matrix for prepregs," Ind. Eng. Chem. Res., 60(17), 6153-6161 (2021).
- Keon-Soo Jang, Hyo Yeol Yeom, Ju Won Park, Song Hee Lee, and Seong Jae Lee, "Morphology, electrical conductivity, and rheology of latex-based polymer/nanocarbon nanocomposites," Korea-Australia Rheol. J., 33(4), 357-366 (2021).
- Tae Gon Kim, Hyeon Sik Eom, Jong Hwi Kim, Jik Kyo Jung, Keon-Soo Jang, and Seong Jae Lee, "Electrically conductive silicone-based nanocomposites incorporated with carbon nanotube and silver nanowire for stretchable electrodes," ACS Omega, 6, 31876 (2021).
[2020]
- Seong Jae Lee and Sang Jae Ahn, "Method for preparing oblate polymer particle," US Patent 10,557,000 (2020).
- Kevin Injoe Jung, Baek Sung Park, Seong Jae Lee, Seung Man Noh, and Hyun Wook Jung, "Effect of immiscible secondary fluid on particle dynamics and coffee ring characteristics during suspension drying," Materials, 13(15), 3438 (2020).
- Seungchul Hong, Deoksu Han, Jangkuk Kwon, Sung Jun Kim, Seong Jae Lee, and Keon-Soo Jang, "Influence of abrasive morphology and size dispersity of Cu barrier metal slurry on removal rates and wafer surface quality in chemical mechanical planarization," Microelectron. Eng., 232, 111417 (2020).
- Bookun Kim, Hwang Lee, Seong Jae Lee, Jung-Hwan Kwon, and Ju Min Kim, "Image cytometry of irregular microplastic particles in a cross-slot microchannel utilizing viscoelastic focusing," Korean J. Chem. Eng., 37(12), 2136-2142 (2020).
[2019]
- Jeonghun Nam, Hyunseul Jee, Woong Sik Jang, Jung Yoon, Borae G. Park, Seong Jae Lee, and Chae Seung Lim, "Sheathless shape-based separation of Candida Albicans using a viscoelastic non-Newtonian fluid," Micromachines, 10(12), 817 (2019).
- Jun Young Kim, Sung Ho Choi, Ji Hun An, and Seong Jae Lee, "Facile and affordable process to control shell thickness of polydopamine-assisted polystyrene/silver core-shell particles," Macromol. Res., 27(11), 1104-1109 (2019).
- Jung Mock Kim, Keon-Soo Jang, and Seong Jae Lee, "Electrically conductive polystyrene nanocomposites incorporated with aspect ratio-controlled silver nanowires," J. Appl. Polym. Sci., 136(36), 47927 (2019).
- Jae Sang Park, Ji Hun An, Keon-Soo Jang, and Seong Jae Lee, "Rheological and electrical properties of polystyrene nanocomposites via incorporation of polymer-wrapped carbon nanotubes," Korea-Australia Rheol. J., 31(2), 111-118 (2019).
- Dong Woo Kang, Kyu Hwan Choi, Seong Jae Lee, and Bum Jun Park, "Mapping anisotropic and heterogeneous colloidal interactions via optical laser tweezers," J. Phys. Chem. Lett., 10, 1691-1697 (2019).
[2018]
- Dong Woo Kang, Byung Gyu Park, Kyu Hwan Choi, Jin Hyun Lim, Seong Jae Lee, and Bum Jun Park, "Geometric effects of colloidal particles on stochastic interface adsorption," Langmuir, 34(30), 8839-8847 (2018).
- Baek Sung Park, Kevin Injoe Jung, Seong Jae Lee, Kwan-Young Lee, and Hyun Wook Jung, "Effect of particle shape on drying dynamics in suspension drops using multi-speckle diffusing wave spectroscopy," Colloid Polym. Sci., 296(5), 971-979 (2018).
- Baek Sung Park, Won-Gi Ahn, Kevin Injoe Jung, Seong Jae Lee, Kwan-Young Lee, and Hyun Wook Jung, "Analysis of the drying behavior of suspension drops with spherical and ellipsoidal particles," Drying Technol., 36(16), 2022-2029 (2018).
- Jin Hyun Lim, Jun Young Kim, Dong Woo Kang, Kyu Hwan Choi, Seong Jae Lee, Sang Hyuk Im, and Bum Jun Park, "Heterogeneous capillary interactions of interface-trapped ellipsoid particles using the trap-release method," Langmuir, 34, 384-394 (2018).
[2017]
- Junghee Kim, Jun Young Kim, Younghun Kim, Seong Jae Lee, and Ju Min Kim, “Shape measurement of ellipsoidal particles in a cross-slot microchannel utilizing viscoelastic particle focusing,” Anal. Chem., 89(17), 8662-8669 (2017).
- Jae Phil Song, Jun Young Kim, and Seong Jae Lee, “Rheological and electrical properties of hydrophilic polymer-coated carbon nanotube/polystyrene nanocomposites,“ Polymer-Korea, 41(4), 686-693 (2017).
- Gwi Jeong Oh, Ji Won Hwang, Ki Wan Bong, Hyun Wook Jung, and Seong Jae Lee, "Particle dynamics and relaxation in bimodal suspensions during drying using multi-speckle diffusing wave spectroscopy," AIChE J., 63(3), 1114-1121 (2017).
- Haseung Kim, Kyung Hyun Ahn, and Seong Jae Lee, "Conductive poly(high internal phase emulsion) foams incorporated with polydopamine-coated carbon nanotubes," Polymer, 110, 187-195 (2017).
[2016]
- Won Kyo Oh, Jungmock Kim, Jae Phil Song, and Seong Jae Lee, "Effect of silica nanoparticles on the electrical properties of epoxy/silver nanowire nanocomposites," Polymer-Korea, 40(4), 614-621 (2016).
- Sang Jae Ahn, Kyung Hyun Ahn, and Seong Jae Lee, "Film squeezing process for generating oblate spheroidal particles with high yield and uniform sizes," Colloid Polym. Sci., 294(5), 859-867 (2016).
- Joo Yong Moon, Seong Jae Lee, Kyung Hyun Ahn, and Seung Jong Lee, "Heterogeneity in the final stage of filament breakup of silicone oil/PMMA suspensions," Rheol. Acta, 55(2), 91-101 (2016).
[2015]
- Jooyoung Lee, Seong Jae Lee, Kyung Hyun Ahn, and Seung Jong Lee, "Nanoparticle-induced gelation of bimodal slurries with highly size-asymmetric particles: effect of surface chemistry and concentration," Langmuir, 31, 13639-13646 (2015).
- Jooyoung Lee, Seong Jae Lee, Kyung Hyun Ahn, and Seung Jong Lee, "Bimodal colloid gels of highly size-asymmetric particles", Phys. Rev. E, 92, 012313 (2015).
- Hyo Yeol Na, Manthiriyappan Sureshkumar, and Seong Jae Lee, "Preparation and properties of electrically conductive polystyrene/silver nanowire nanocomposites," Polymer-Korea, 39(4), 655-661 (2015).
- Joo Yong Moon, Seong Jae Lee, Kyung Hyun Ahn, and Seung Jong Lee, "Filament thinning of silicone oil/poly(methyl methacrylate) suspensions under extensional flow," Rheol. Acta, 54(8), 705-714 (2015).
- Hyo Yeol Yeom, Hyo Yeol Na, Dae-won Chung, and Seong Jae Lee, "Preparation and properties of polystyrene/graphene nanofiller nanocomposites via latex technology," Polymer-Korea, 39(3), 468-474 (2015).
- Ha Seung Kim, Hyo Yeol Na, Jong Heon Lee, and Seong Jae Lee,"Preparation, morphology and electrical conductivity of polystyrene/polydopamine-carbon nanotube microcellular foams via high internal phase emulsion polymerization," Polymer-Korea, 39(2), 293-299 (2015).
- Sung Won Ahn, Sung Sik Lee, Seong Jae Lee, and Ju Min Kim, "Microfluidic particle separator utilizing sheathless elasto-inertial focusing," Chem. Eng. Sci., 126, 237-243 (2015).
- Manthiriyappan Sureshkumar, Hyo Yeol Na, Kyung Hyun Ahn, and Seong Jae Lee, "Conductive nanocomposites based on polystyrene microspheres and silver nanowires by latex blending," ACS Appl. Mater. Interfaces, 7, 756-764 (2015).
[2014]
- Hyo Yeol Yeom, Hyo Yeol Na, and Seong Jae Lee, "Effect of adding crosslinked particles on rheological and electrical properties of polystyrene/carbon nanotube nanocomposites,” Polymer-Korea, 38(6), 767-773 (2014).
- Hyo Yeol Yeom, Hyo Yeol Na, and Seong Jae Lee, "Influence of graphene oxide and graphite nanoplatelets on rheological and electrical properties of polystyrene nanocomposites,” Polymer-Korea, 38(4), 502-509 (2014).
- Hyo Yeol Na, Hyo Yeol Yeom, Byung Chul Yoon, and Seong Jae Lee, "Cure behavior and chemorheology of low temperature cure epoxy matrix resin,” Polymer-Korea, 38(2), 171-179 (2014).
[2013]
- Kyowon Kang, Sung Sik Lee, Kyu Hyun, Seong Jae Lee, and Ju Min Kim, "DNA-based highly tunable particle focuser," Nature Commun., 4:2567 doi: 10.1038/ncomms3567 (2013).
- Myung Hwan Kang, Hyo Yeol Yeom, Hyo Yeol Na, and Seong Jae Lee, "Comparative study of physical dispersion method on properties of polystyrene/multi-walled carbon nanotuve nanocomposites," Polymer-Korea, 37(4), 526-532 (2013).
- Hyo Yeol Na, Byung Chul Yoon, Seung Hwan Kim, and Seong Jae Lee, "Chemorheological behavior of cyanate ester resin and properties of carbon fiber reinforced polymer composites," Elastomers and Composites, 48(2), 133-140 (2013).
- Jeong Yong Lee, Ji Won Hwang, Hyun Wook Jung, Sung Hyun Kim, Seong Jae Lee, Kisun Yoon, and David A. Weitz, "Fast dynamics and relaxation of colloidal drops during the drying process using multi-speckle diffusing wave spectroscopy," Langmuir, 29(3), 861-866 (2013).
[2012]
- Sukgyun Cha, Taeho Shin, Sung Sik Lee, Wooyoung Shim, Gwang Lee, Seong Jae Lee, Younghun Kim, and Ju Min Kim, "Cell stretching measurement utilizing viscoelastic particle focusing," Anal. Chem., 84(23), 10471-10477 (2012).
- Won-Jin Noh, Myung Hwan Kang, and Seong Jae Lee, "Morphology and electrical conductivity of polystyrene/carbon nanotube microcellular foams polymerized by high internal phase emulsions," Polymer-Korea, 36(5), 579-585 (2012).
- Myung Hwan Kang and Seong Jae Lee, "Rheological and electrical properties of polystyrene/multi-walled carbon nanotube nanocomposites prepared by latex technology," Korea-Australia Rheol. J., 24(2), 97-103 (2012).
- Myung Hwan Kang, Won-Jin Noh, Dong Kyun Woo, and Seong Jae Lee, "Effect of surfactant on rheological and electrical properties of latex-blended polystyrene/single-walled carbon nanotube nanocomposites," Polymer-Korea, 36(3), 364-371 (2012).
[2011]
- Ah Reum Kang, Sung Won Ahn, Seong Jae Lee, Byunghwan Lee, Sung Sik Lee, and Ju Min Kim, “Medium viscoelastic effect on particle segregation in concentrated suspensions under rectangular microchannel flows,” Korea-Australia Rheol. J., 23(4), 247-254 (2011).
- Myung Hwan Kang, Won-Jin Noh, and Seong Jae Lee, "Effect of latex particle size on rheological and electrical properties of polystyrene/multi-walled carbon nanotube nanocomposites," Polymer-Korea, 35(5), 451-457 (2011).
- Seungyoung Yang, Jae Young Kim, Seong Jae Lee, Sung Sik Lee and Ju Min Kim, "Sheathless elasto-inertial particle focusing and continuous separation in a straight rectangular microchannel," Lab Chip, 11(2), 266-273 (2011).
[2010]
- Dong Kyun Woo, Won-Jin Noh, and Seong Jae Lee, "Effect of nanotube length on rheological characteristics of polystyrene/multi-walled carbon nanotube nanocomposites prepared by latex technology,” Polymer-Korea, 34(6), 534-539 (2010).
- Dong Kyun Woo and Seong Jae Lee, "Effect of treatment method on rheological properties of latex-blended polystyrene/multi-walled carbon nanotube nanocomposites," Korea-Australia Rheol. J., 22(3), 219-227 (2010).
- Byung Chul Kim, Jin Hong Park, and Seong Jae Lee, "Preparation of composite particles via electroless nickel plating on polystyrene microspheres and effect of plating conditions," Polymer-Korea), 34(1), 25-31 (2010).
[2009]
- Dong Kyun Woo, Byung Chul Kim and Seong Jae Lee, "Preparation and rheological behavior of polystyrene/multi-walled carbon nanotube composites by latex technology," Korea-Australia Rheol. J., 21(3), 185-191 (2009).
[2008]
- Byung Chul Kim and Seong Jae Lee, "Silicate dispersion and rheological properties of high impact polystyrene/organoclay nanocomposites via in situ polymerization," Korea-Australia Rheol. J., 20(4), 227-233 (2008).
- Sung Jun Hwang, Yong Lak Joo, and Seong Jae Lee, "Properties of high-impact polystyrene/organoclay nanocomposites synthesized via in situ polymerization," J. Appl. Polym. Sci., 110(5), 1441-1450 (2008).
- Sung Jun Hwang, Dae-won Chung, and Seong Jae Lee, "Synthesis and properties of high impact polystyrene nanocomposites based upon organoclay having reactive group," Polymer-Korea, 32(4), 347-352 (2008).
- In Hee Song, Byung Chul Kim, and Seong Jae Lee, "Reinforced polymer/clay nanocomposite foams with open cell prepared via high internal phase emulsion polymerization," Polymer-Korea, 32(2), 183-188 (2008).
[2006]
- Seong Jae Lee, "Emulsion rheology and properties of polymerized high internal phase emulsions", Korea-Australia Rheol. J., 18(4), 183-189 (2006).
[2005]
- Hyun-Ok Park, Joung Sook Hong, Kyung Hyun Ahn, Seong Jong Lee and Seong Jae Lee, "Influence of preparation parameters on rheological behavior and microstructure of aqueous mixtures of hyaluronic acid/poly(vinyl alcohol)", Korea-Australia Rheol. J., 17(2), 79-85 (2005).
- Jun Uk Park, Saehan Cho, Kwang Soo Cho, Kyung Hyun Ahn, Seung Jong Lee and Seong Jae Lee, "Effective in-situ preparation and characteristics of polystyrene-grafted carbon nanotube composites", Korea-Australia Rheol. J., 17(2), 41-45 (2005).
[2004]
- Byoung Chul Chun, Seong Jae Lee, Mi Hwa Chung, Jung Hwan Park, Hee Woo Park, Yong-Chan Chung, and Oh Cheul Kweon, "Freshness maintenance of polyethylene film containing surface-modified zeolite," Korean J. of Food Preservation, 11(4), 478-484 (2004).
- Seong Jae Lee, "Flow behavior of high internal phase emulsions and preparation to microcellular foam", Korea-Australia Rheol. J., 16(3), 153-160 (2004).
- Sun Woong Hwang, Yong-Chan Chung, Byoung Chul Chun, and Seong Jae Lee, "Gas permeability of polyethylene films containing zeolite powder," Polymer-Korea, 28(5), 374-381 (2004).
- Seong Jae Lee, Byoung Chul Chun, Kyung Hyun Ahn and Seung Jong Lee, "Time evolution of rubber particle size distribution in bulk polymerization of high impact polystyrene", J. Chem. Eng. Japan, 37(2), 279-285 (2004).
[2003]
- Chan Ik Park, Wan Gu Cho and Seong Jae Lee, "Emulsion stability of cosmetic creams based on water-in-oil high internal phase emulsions", Korea-Australia Rheol. J., 15(3), 125-130 (2003).
- Chan Ik Park, Tae Jun Kang, and Seong Jae Lee, "Effect of rheological properties of emulsions having sunscreening agent on sun protection efficacy," Hwahak Konghak (Korean Chemical Engineering Research), 41(5), 598-603 (2003).
- Kwan Young Kim, Hyo Jin Lim, Sang Min Park, and Seong Jae Lee, "Synthesis and characterization of high impact polystyrene/organically modified layered silicate nanocomposites," Polymer-Korea, 27(4), 377-384 (2003).
- Ji Sun Choi, Byoung Chul Chun and Seong Jae Lee, "Effect of rubber on microcellular structures from high internal phase emulsion polymerization", Macromolecular Research, 11(2), 104-109 (2003).
- Seong Jae Lee, Han Gyun Jeoung and Kyung Hyun Ahn, "Influence of solvent contents on rubber-phase particle size distribution of high impact polystyrene", J. Appl. Polym. Sci., 89(13), 3672-3679 (2003).
[2002]
- Han Gyun Jeoung, Su Jin Ji, and Seong Jae Lee, "Morphology and properties of microcellular foams by high internal phase emulsion polymerization: effect of emulsion compositions," Polymer-Korea, 26(6), 759-766 (2002).
- Han Gyun Jeoung, Jung Shin Park, Dae Suk Jang, and Seong Jae Lee, "Effect of solvent content on morphology and rubber particle size distribution of high impact polystyrene," Polymer-Korea, 26(3), 307-315 (2002).
- Ki Byung Sunwoo, Seung Joon Park, Seong Jae Lee, Kyung Hyun Ahn and Seung Jong Lee, "Three-dimensional viscoelastic simulation of coextrusion process: comparison with experimental data", Rheol. Acta, 41(1/2), 144-153 (2002).
[2001]
- Dong-Hak Kim, Do Young Moon and Seong Jae Lee, "Evaluation of liquid gas-assisted injection molding", J. Injection Molding Tech., 5(4), 224-228 (2001).
- Kyung Sun Chae, Seong Jae Lee, Kyung Hyun Ahn and Seung Jong Lee, "Coupled approach of analytical and numerical methods for shape prediction in sheet casting process", Korea-Australia Rheol. J., 13(3), 131-139 (2001).
- Han Gun Jeoung, Dae-won Chung, Kyung Hyun Ahn, Seung Jong Lee, and Seong Jae Lee, "Interpretation of morphology and rubber-phase particle size distribution of high impact polystyrene," Polymer-Korea, 25(5), 744-753 (2001).
- Ki Byung Sunwoo, Seung Joon Park, Seong Jae Lee, Kyung Hyun Ahn and Seung Jong Lee, "Numerical simulation of three-dimensional viscoelastic flow using the open boundary condition method in coextrusion process", J. Non-Newt. Fluid Mech., 99(2/3), 125-144 (2001).
- Ju Min Kim, Kyung Hyun Ahn, Seong Jae Lee and Seung Jong Lee, "Numerical simulation of moving free surface problems in polymer processing using volume-of-fluid method", Polym. Eng. Sci., 41(5), 858-866 (2001).
- Sungbok Kwak, Mi Ae Choi, and Seong Jae Lee, "Mechanical properties of composites of HDPE and recycled tire crumb," Elastomer, 36(1), 22-29 (2001).
[~ 2000]
- Ki Byung Sunwoo, Seung Joon Park, Seong Jae Lee, Kyun Hyun Ahn and Seung Jong Lee, “Three-dimensional numerical simulation of nonisothermal coextrusion process with generalized Newtonian fluids”, Korea-Australia Rheol. J., 12(3), 165-173 (2000).
- Byoung Chul Chun, Seong Jae Lee, Sang Hyuk Cha, Kyu Sik Bae, Sung-Yong Park, and In-Bum Jeong, "Effect curing agent content on the thermal and physical properties of conductive Ag/Epoxy system," J. of the Korean Fiber Society, 37(12), 689-695 (2000).
- Kyung Sun Chae, Mi Hye Lee, Seong Jae Lee and Seung Jong Lee, “Three-dimensional numerical simulation for the prediction of product shape in sheet casting process”, Korea-Australia Rheol. J., 12(2), 107-117 (2000).
- Seong Jae Lee and Seung Lee, "Analysis of particle size distribution of HIPS prepared by agitated dispersions with polymerization," Transport Phenomena (by Korean Institute of Chemical Engineers), 14(1), 22-27 (2000).
- Seong Jae and Seung Jong Lee, "Modeling and prediction of the particle size distribution of a high-impact polymer in the multicomponent dispersed polymerization reactor," Hwahak Konghak (Korean Chemical Engineering Research), 38(4), 467-473 (2000).
- Kyung-Ho Chung, Seong Jae Lee, and Young-Wook Chang, "Adhesion properties of rubber composite with direct blending technique and adhesive composition," Elastomer, 34, 253-261 (1999).
- Seong Jae Lee, “Prediction of average drop size in turbulently agitated oil-in-oil dispersions”, Korean Journal of Rheology, 10(1), 1-6 (1998).
- Seong Jae Lee, “Simulation for the filling process of resin transfer molding by incorporating composite grids”, Korean J. of Rheology, 9(3), 103-110 (1997).
- Seong Jae Lee and Kyung-Ho Chung, “Average particle size prediction of rubber dispersed phase in high impact polystyrene”, J. of the Korean Institute of Rubber Industry, 31(5), 327-334 (1996).
- Seung Joon Park, Ilsoon Lee, Seong Jae Lee, and Seung Jong Lee, "The determination of continuous relaxation time spectrum of linear polymer”, Korean Journal of Rheology, 8(2), 103-118 (1996).
- Ki Soon Park, Seong Jae Lee, and Seung Jong Lee, “A rheological analysis on the semiconcentrated fiber suspensions including fiber-fiber interactions”, Korean Journal of Rheology, 8(1), 49-57 (1996).
- Seong Jae Lee and Seung Jong Lee, "Numerical simulation of complex flows of semiconcentrated fiber suspensions", Intern. J. of Polym. Mater. Polym. Biomater., 21, 65-73 (1993).
- Seong Jae Lee and Seung Jong Lee, "The effect of fiber orientation on the extrudate swell of fiber suspensions”, Korean Journal of Rheology, 4(1), 70-81 (1992).
- Seong Jae Lee and Seung Jong Lee, "Numerical simulation of extrudate swell of semiconcentrated fiber suspensions," in Recent Advances in Non-Newtonian Flows, ASME AMD 153, 87-92 (1992).
- Seong Jae Lee and Seung Jong Lee, “Numerical prediction of three-dimensional extrudate swell”, Korean Journal of Rheology, 2(2), 35-44 (1990).
- Seong Jae Lee, Dong Gil Suh, and Seung Jong Lee, “Study on the mold filling process of short fiber filled composite systems”, Hwahak Konghak (Korean Chemical Engineering Research), 27, 496-505 (1989).