How to Fix Brother Printer Not Turning On Issue? (Easy Guide)

If your Brother printer is not turning on and you are looking for ways to fix the issue, you have come to the right place. In this guide, we will show you ‘how to fix Brother printer not turning on issue quickly‘.

Despite being one of the most trusted brands, Brother printers can face technical glitches like other brands. Many users encounter this Brother printer not turning on issue worldwide. When they are about to start their work, their Brother printer does not turn on, especially when they have urgent work to do in the office.

So, without wasting your valuable time, let’s proceed to troubleshooting steps to understand how to fix Brother printer not turning on issue.

How to Fix Brother Printer Not Turning On Issue?

The issue of Brother printer not turning on can be caused by several factors, including the defective power cable or your printer might be in sleep mode. To fix Brother printer not turning on issue, you will need to perform multiple troubleshooting methods.

Here are the methods that you can follow to learn ‘how to fix Brother printer not turning on issue‘:

Method 1: Unplug the Power Cable and Plug It Back

Let’s start with the basics before trying out any complex troubleshooting method. What you can do is unplug the power cable and plug it back into your Brother printer. This is because, at times, improper connections can cause this error to appear on your Brother printer.

Here is the right way to use this method:

1. Disconnect the power cable from your Brother printer and the power outlet.

2. Wait for a few moments.

3. Then, connect the power cable back in again to the printer and the power outlet.

4. Lastly, press the Power button on your Brother printer to see if the power light indicator starts blinking.

Method 2: Check the Power Cord and Printer’s Power Button

Sometimes, you may encounter the issue of Brother printer not turning on if the power cable you use is not in good condition or damaged. In this case, unplug the power cable from the power socket and check for any visible signs of damage. If you find any damage, it is advisable to replace it with a new cable as soon as possible.

In case the power cable is in good condition and working properly, then inspect the power button of your Brother printer. Make sure the power button is in a proper working condition. If not, you should connect with a printer expert.

Method 3: Clean Your Brother Printer

If your ‘Brother printer has a leaking cartridge’, then this might result in a short circuit, causing the Brother printer not to turn on issue. So, to avoid this problem, clean the ink cartridge section of your Brother printer, then replace the leaking cartridge.

Thoroughly clean the outside and interior of your Brother printer. After that, press the power button of the printer to turn it on and check if the problem has been resolved.

Method 4: Examine the Printhead and Cartridge

In order to perform this troubleshooting method, you will need to remove the printhead. Then, check if there is any issue and make sure everything is in good condition. The most common culprits behind printhead failures are microscopic dust particles, air bubbles, or dried ink.

If the printhead of your Brother printer is working fine, then check for the ink level in the cartridge. If the cartridge has dried up and you are still trying to use your printer, it will overheat your printer beyond the limit. Also, it may result in permanently damaged print nozzles, and in some cases, the print nozzles might catch fire.

So, it is recommended to remove the printhead gently and turn off the printer for at least an hour. Then, try turning on your Brother printer without installing the print head. After you have completed this, check if it fixes the Brother printer not turning on issue.

Method 5: Check If Your Brother Printer Is In Sleep Mode

It is possible that Sleep Mode is the reason for the Brother printer not turning on issue. This is a common issue where the printer appears “off” when it’s actually in a power-saving sleep state. In this case, a specific action is required to wake it up again.

Depending on your Brother Printer model, if the printer is not used for a specified time period, it will enter Sleep Mode. So, if your Brother printer isn’t turning on, it’s very likely that it could be in Sleep Mode. You can simply exit the Sleep Mode by pressing on the display LCD.

Method 6: Restore the Power

After confirming that your Brother printer is not in Sleep Mode, the power cable is firmly connected, and the printhead and cartridge are in good working condition. Now, it is time to try to restore power to the printer to fix Brother printer not turning on issue.

There are three different ways or procedures you can use to restore power to your Brother printer.

Procedure 1:

1. First, remove the power cord and wait for at least 15 seconds.

2. Press and hold down the Power button while inserting the power cord back in.

3. Continue to hold the Power button down until the printer is powered on completely.

4. If it does not work, repeat this procedure up to three times.

Procedure 2:

1. Remove the power cord and wait for at least 15 seconds.

2. Then, remove the paper tray from your Brother printer.

3. After that, reconnect the power cord and turn on the printer.

4. Once your Brother printer is fully powered on, reinsert the paper tray back into it.

Procedure 3:

1. First, remove the paper tray from your Brother printer.

2. After that, remove the power cord and wait for at least 15 seconds.

3. Next, press and hold down the Power button while inserting the power cord back in.

4. After 10 seconds, the display should illuminate with this message: “Please put the paper tray firmly back in the machine.”

5. Now, reinsert the paper tray back into your Brother printer.

Method 7: Remove Power For 1 Hour

This is another troubleshooting method how to fix Brother printer not turning on issue. However, it does take some time.

To perform this method, you will need to remove the power cable from the printer and wait at least an hour. After an hour, reconnect the power cord back in and try to turn on your Brother printer.

Conclusion

If you encounter a ‘Brother printer not turning on issue‘, don’t worry. This is a common issue faced by many Brother printer users. Fixing the Brother printer not turning on issue is a simple and straightforward process. By following the above-mentioned methods, you can easily fix Brother printer not turning on issue.

Thank you for reading this guide. We hope you find this guide helpful!

Frequently Asked Questions (FAQs)

How do I soft reset my Brother printer?

To soft reset your Brother printer, simply unplug the power cord from the printer, wait for at least 30 seconds, then plug it back in and turn the printer on. This essentially restarts the printer and can often resolve minor issues.

What Do I Do If My Brother Printer Is Not Powering On?

If you cannot power your Brother printer on by pressing and holding the power button on the printer’s control panel, do the following:

• Check if the Brother printer is in Sleep Mode

• Check that the power cord and power outlet are working properly.

• Try to restore power to your printer.

For more information, read the above-mentioned troubleshooting methods.

Why does my Brother printer keep turning itself off?

A Brother printer turns off on its own because it likely has the “Auto Power Off” feature enabled, which automatically shuts down the printer after a period of inactivity to save energy; you can adjust this setting in your printer’s settings to either disable it or change the idle time before it turns off.

If you want your printer to stay on continuously, simply navigate to the power settings and set the “Auto Power Off” time to “0 minutes“.

Source URL: - How to Fix Brother Printer Not Turning On Issue