As a remote Architectural Technologist, your input is invaluable! The measurements and photos you provide form the foundation of your project. They allow me to clearly understand your existing space and design your proposed adaptation with all the necessary detail. Don't worry – you don't need to be a surveyor; I'll guide you every step of the way.
Please gather the following key dimensions. A tape measure (preferably a longer one for external walls), a notepad, and a pen are all you'll need!
Drawing a Sketch: It's often very helpful to sketch a rough floorplan as you measure, noting down the dimensions directly onto your drawing. This helps ensure you don't miss anything.
Overall Dimensions: Measure the full length and width of your property, or at least the specific part you intend to adapt (e.g., the rear of the house for an extension).
Room by Room: For each room involved in the adaptation, measure:
-The full length and width of the room.
-The height from the floor to the ceiling.
-The specific position and width of all doors and windows (measure the opening from frame to frame).
-The height from the floor to the bottom of the window (cill height) and from the window cill to the top of the window(window head height).
Key Features: Note the location and dimensions of any fixed elements that can't be moved, such as chimney breasts, internal walls you want to remove, boilers, or existing plumbing points that you wish to retain.
You should aim to produce something like this.
Take photos of each room you plan to adapt, from multiple angles. Try to capture entire walls in one shot.
Include photos looking towards and away from existing windows and doors.
Capture details of any existing features you want to keep or remove (e.g., fireplaces, built-in storage, radiators).
Take photos of all sides of your property relevant to the adaptation.
Include photos showing the proposed extension area, and how it relates to the garden, adjacent structures, and neighbouring properties (if visible).
Capture details of existing drainage, vents, downpipes, or utility meters on the outside walls.
Take photos in good daylight where possible, but avoid direct glare.
Try to remove clutter to give a clear view of the space.
Use a wide-angle if your phone has one, or stand back as much as possible to capture the full room/area.
Once you have your measurements and photos, please compile them into a folder (e.g., a PDF, a series of images, or a Word document). I will provide you with a secure link to easily upload these files after our initial consultation.
Once received, I'll carefully review your information. If anything is unclear or additional details are needed, I'll be in touch. Remember, I'm here to guide you – if you have any questions at all about taking measurements or photos, please just ask!