Embedded Files
1 P.K. Rohatgi, R. Asthana & S. Das, Solidification, structure and properties of cast metal-ceramic particle composites, International Metals Reviews, 31 (3) (1986) pp. 115- 139.
2 S. Das, T.K. Dan,S.V. Prasad and P.K. Rohatgi Aluminium alloy-rice husk ash particle composites J. Mater. Sci. Lett., Vol. 5 (1986) pp. 562-564.
3 N. Chand, S. Das, P.K. Rohatgi Mechanical behaviour of rapidly solidified Al-Si ribbon-polyester composite, J. Mater. Sci. Lett., Vol. 5 (1986) pp. 823 - 826.
4 S. Das, T.K. Dan and P.K. Rohatgi Solidification of Al-Si alloy in the presence of graphite particles, R. Asthana, J. Mater.Sci. Lett., Vol. 5 (1986) pp. 1083 - 1086.
5 S. Das, A.H. Yegneswaran & P.K. Rohatgi, Characterization of rapidly solidified Al-Si alloys, J. Mater. Sci., Vol. 22 (1987) pp. 3173-3177.
6 P.K. Rohatgi, S. Das & T.K. Dan Cast Al - graphite particle composites - A potential engineering material, Journal of the Institution of Engineers (India), Vol. 67, Part MM2, March (1987) pp. 77-83.
7 S. Das, S.V. Prasad, P.K. Rohatgi & T.R. Ramachandran, Some observation on the matrix microstructure of Al-Si alloy - graphite particle composites, Met. Trans., Vol. 19A, May (1988) pp. 1365-1367.
8 S.Das, T.R. Ramachandran & S.V. Prasad Microstructure of rapidly solidified Al - Si - Graphite composites, Scripta Met., Vol. 23 (1989) pp. 3-6.
9. S. Das, S.V. Prasad and T.R. Ramachandran, Microstructure and Wear of Cast Al-Si alloy – Graphite
composites, Wear, Vol. 133 (1989), pp. 173-187.
10. P.K. Rohatgi, S. Das, S.V. Prasad and R. Asthana, Some modified structures of the matrix in cast Al-alloy-graphite particle composites, Z. Metallkde, Bd. 80 (1989), H.6. pp. 444-446 .
11. S. Das, S.V. Prasad & T.R. Ramachandran Tribology of Al-Si alloy- graphite composites: Tribo induced graphite films & the role of silicon morphology, , Materials Science & Engineering, Vol. A138 (1990) pp. 123-132.
12. S. Das, S.V. Prasad, T.R. Ramachandran, P.K.Rohatgi Microstructure of cast Al-Si alloys in presence of dispersed graphite particles, , Materials Trans., Japan Institute of Metal, Vol. 32 (2) (1991) pp. 189-194.
13. B.K. Prasad and S. Das The significance of the matrix microstructure on the solid lubrication characteristics of graphite in aluminum alloy,Materials Science and Engineering, Vol. A144 (1991) pp. 229-235.
14. S. Das and B.K. Prasad, Tribological behaviour of Aluminium Alloy Composites: a comparative study with a copper - based alloy, Wear, Vol. 162-164 (1993) pp. 64-74.
15. S. Das, B.K. Prasad, A.K. Jha, O.P. Modi, and A.H. Yegneswaran Three-body abrasive wear of 0.98% C steel, , Wear, Vol. 162-164 (1993) pp. 802-810.
16. O.P. Modi, B.K. Prasad, S. Das, A.K. Jha, and A.H. Yegneswaran, Abrasive wear behaviour of an AISI 5132 steel under low stresses, Materials Trans., Japan Institute of Metals, Vol. 35, No.1 (1994) pp. 67-73.
17. B.K. Prasad, A.K. Jha, O.P. Modi, S. Das and A.H. Yegneswaran Abrasive wear characteristics of a Zn-37.2 Al - 2.5 Cu - 0.2 Mg Alloy dispersed with SiC particles, Materials Trans., Japan Institute of Metals, Vol. 36 (1995) pp. 1048-1057.
18. A.K. Jha, S. Das, O.P. Modi, B.K. Prasad, R. Dasgupta and A.H. Yegneswaran Development of materials for shovel teeth for mining industries, , MINETECH, Vol. 17 No. 2 & 3 (1996) pp. 78-82
19. S. Das The influence of matrix microstructure and particle reinforcement on the two - body abrasive wear of cast Al-Si-Alloy composites, J. Mater. Sci. Lett., Vol. 16 (1997) pp. 1757-1760.
20. B.K. Prasad, S. Das, A.K. Jha, O.P.Modi, R. Dasgupta and A.H. Yegneswaran Factors Controlling the Abrasive Wear Response of a Zinc-Based Alloy Silicon Carbide Particle Composite, , Composites A, Vol. 28A (1997), 301-308.
21. R. Dasgupta, B.K. Prasad, O.P. Modi, S. Das, A.K. Jha and A.H. Yegneswaran, Surface Engineering for Improving Performance of Mining and Agricultural Implements, Surface Engineering, (1997) Vol. 13 No. 2, 123-127.
22. R. Dasgupta, A.K. Prasad, A.K. Jha, O.P. Modi, S. Das and A.H. Yegneswaran, Slurry erosive wear characteristics of a hard faced steel: Effect of experimental parameters, Wear, Vol. 213 (1997) pp. 41-46.
23. R. Dasgupta, B.K. Prasad, A.K. Jha, O.P. Modi, S. Das and A.H. Yegneswaran, Wear characteristics of hard faced steel in slurry - Wear, Vol. 209 (1997) pp. 255-262.
24. B.K. Prasad, K. Venkateshwarlu, S. Das, A.K. Jha and R. Dasgupta Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under the conditions of varying abrasive size and applied load, Journal of Materials Science Letters,Vol.16 (1997) pp.1113-1115.
25. R. Dasgupta, B.K. Prasad, A.K. Jha, S. Das, O.P. Modi and A.H. Yegneswaran, Wear characteristics of a hard faced steel in slurry, Wear, Vol. 209 (1997) pp. 255-262.
26. O.P. Modi, MohiniSaxena, B.K. Prasad, A.K. Jha, S. Das and A.H. Yegneswaran, Role of alloy matrix and dispersoid on corrosion behaviour of cast Al alloy composites by Corrosion. Vol. 54, No. 2 (1998) pp. 129-134.
27. R. Dasgupta, B.K. Prasad, O.P. Modi, A.K. Jha, S. Das and A.H. Yegneswaran Low stress abrasive wear behaviour of hardfaced steel, , Journal of Materials Engineering and Performance, Vol. 7, No. 2, (1998), pp. 221-226.
28. B.K. Prasad, K. Venkateshwarlu, O.P. Modi, A.K. Jha, S. Das, RupaDasgupta and A.H. Yegneswaran, Sliding wear behaviour of some Al-Si alloys: Role of shape and size of Si particles and test conditions, Metallurgical Transactions, Vol. 29A, 11 (1998), pp. 2747 - 2752.
29. B.K. Prasad, K. Venkateshwarlu, O.P. Modi, A.K. Jha, S. Das, R. Dasgupta and A.H. Yegneswaran The Effects of Primary Silicon Particles on the Sliding Wear Behaviour of Aluminium-Silicon Alloys, Journal of Materials Science Letters, Vol. 17 (1998), pp. 1381-1383.
30. B.K. Prasad, K. Venkateshwarlu, O.P. Modi, A.K. Jha, S. Das, R. Dasgupta and A.H. Yegneswaran, Sliding Wear Response of an Al-Cu Alloy: The Influence of SiC Particle Reinforcement and Test Parameters, Journal of Materials Science Letters, Vol. 17 (1998), pp. 1121-1123.
31. B.K. Prasad, K. Venkateshwarlu, O.P. Modi, A.K. Jha, S. Das, R. Dasgupta and A.H. Yegneswaran, Two-Body Abrasion Characteristics of a Zinc-Based Alloy: Effects of SiC Particle Reinforcement and Related Fields, Journal of Materials Science Letters, Vol. 17 (1998), pp. 901-903.
32. R. Dasgupta, B.K. Prasad, A.K. Jha, O.P. Modi, S. Das, A.H. Yegneswaran Surface Engineering : An Avenue for Improving Life of Agricultural Implements, , Institute of Engineers, MM, Vol. 79, Dec. (1998) pp. 36-43
33. R. Dasgupta, B.K. Prasad, A.K. Jha, O.P. Modi, S. Das and A.H. Yegneswaran Hardfacing : A Technique for Combating Abrasive/ Erosive Wear, Materials Trans., Japan Institute of Metals, Vol. 39, No. 12, (1998) pp. 1191-1196.
34. D.P. Mondal, S. Das, A.K. Jha, A.H. Yegneswaran,Abrasive wear of Al alloy-Al2O3 particle composite: A study on the combined effect of load and size of abrasive, Wear, Vol. 223 (1998) pp. 131-138.
35. D.P. Mondal, S. Das, B.K. Prasad Study of erosive-corrosive wear characteristics of an aluminium alloy composite through factorial design of experiments, Wear, Vol. 217 (1998) pp. 1-6.
36. R. Dasgupta, B.K. Prasad, A.K. Jha, O.P. Modi, S. Das and A.H. Yegneswaran,
Effect of Sand Concentration on Slurry Erosion of Steels, Materials Trans., Japan Institute of Metals, Vol. 39, No. 12 (1998) pp. 1185-1190.
37. D.P. Mondal, K.K. Roy and S. Das Strength of ferrite in annealed ARMCO Iron and hypoeutectoid steels, Z. Metallkunde, Vol. 89 (9) (1998) pp. 635-6411999-2000
38. O.P. Modi, B.K. Prasad, A.K. Jha, S. Das, RupaDasgupta and M.Singh Slurry Erosion-Corrosion of Aluminium (Al-Cu) Alloy-Silicon Carbide Composites: Effects of Some Material and Experimental Variables, Z. Metallkd., Vol. 90, 3, (1999) pp. 189-194.
39. B.K. Prasad, S. Das, O.P. Modi, A.K. Jha, R. Dasgupta and A.H. Yegneswaran,Wear response of a Zn-base Alloy in the Presence of SiC particle Reinforcement : A Comparative Study with a Copper-Base Alloy, , Journal of Materials Engineering and Performance, Vol. 8(6), Dec. (1999) pp. 693-700.
40. B.K. Prasad, A.K. Jha, S. Das, O.P. Modi, R. Dasgupta, A.H. Yegneswaran Sliding wear response of a Zinc-Aluminium alloy as affected by SiC particle dispersion and test conditions, Journal of Materials Science, Vol. 18 (1999) pp. 1731-1734.
41. O.P. Modi, R.P. Yadav, B.K. Prasad, A.K. Jha, S. Das and A.H. Yegneswaran Microstructure and Wear of Zinc-Aluminium Alloys: Influence of Secondary Processing and Alloy Composition, Zeitschrift fur Metallkunde, Vol. 90 (6) (1999) pp. 439-443.
42. S. Das, D.P. Mondal, O.P. Modi and R. Dasgupta Influence of Experimental Parameters on the Erosive-Corrosive Wear of Al-SiC Particle Composite, , Wear, Vol. 231 (1999) pp. 195-205
43. S. Das, D.P. Mondal, R. Dasgupta and B.K. Prasad,Mechanism of material removal during erosion-corrosion of an Al-SiC particle composite, , Wear, Vol. 236 (1999) pp. 295-302
44. S. Das, S. Gupta, D.P. Mondal and B.K. Prasad Influence of Load and Abrasive Size on the Two Body Abrasive Wear of Al-SiC Composites, Aluminium Trans., Vol. 2 (2000) pp. 27-36.
45. M. Singh, A.K. Jha, S. Das and A.H. Yegneswaran Preparation and Properties of Cast Al alloy - Granite Particle Composite, J. Mater. Sci., Vol. 35, issue no. 17 (2000), pp. 4421-4426
46. D.P. Mondal, S. Das, Y.L. Saraswati and A.H. Yegneswaran, The effect of heat treatment on the Erosive - Corrosive Wear of Aluminium and Aluminium Matrix Composites, Aluminium Trans., Vol. 2, (2000) pp. 215-224.
47. A.K. Jha, S. Das, O.P. Modi, B.K. Prasad, R. Dasgupta and A.H. Yegneswaran Role of Materials Engineering Towards Controlling the Working Efficiency of Coal Mining and Processing Industries, , Minetech, Vol. 21, No. 3 & 4, (2000), pp. 72-77.
2001-03
48. S. Das, D.P. Mondal and G. Dixit Correlation of Abrasive Wear with Microstructure and Mechanical Properties of Pressure Die Cast Aluminium Hard Particle Composite, , Metallurgical and Materials Transaction, Vol. 32A, No. 3 (2001) pp. 633-642
49. O.P. Modi, R.P. Yadav, D.P. Mondal, R. Dasgupta, S. Das, A.H. Yegneswaran Abrasive Wear behaviour of Zinc-Aluminium alloy - 10wt% Al2O3 Composite through Factorial Design of Experiment, , Journal of Material Science, Vol. 36 (2001) pp. 1601-1607.
50. M. Singh, D.P. Mondal, A.K. Jha, S. Das, A.H. Yegneswaran Preparation and properties of Cast Aluminium Alloy-Sillimanite Particle Composite, Composites : Part A, Vol. 32 (2001) pp. 787-795.
51. Y.L. Saraswathi, S. Das and D.P. Mondal A comparative study of corrosion behaviour of Al-SiCp composite with cast iron, Corrosion, Vol. 57, No. 7, (2001), pp. 643-653.
52. B.K. Prasad, O.P. Modi, A.K. Jha, R. Dasgupta, S. Das, D.P. Mondal and A.H. Yegneswaran Erosion-Corrosion-Abrasion Characteristics of a Zinc-Based Alloy and Its Composite Containing Alumina Particle Dispersoid, Materials Science & Technology, U.K., Vol. 17 (2001), pp. 1444-1450.
53. S. Das, D.P. Mondal, S. Sawla and S. Dixit High Stress Abrasive Wear Mechanism of LM13-SiC Composite under Varying Experimental Conditions, Metallurgical & Materials Transactions A, Vol. 33A (2002), pp. 3031-3044.
54. A.K. Jha, B.K. Prasad, O.P. Modi, S. Das and A.H. Yegneswaran Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel, Wear, UK, Vol. 254 (2003), pp. 120-128.
55. R. Dasgupta, H. Meenai and S. Das Age hardening of Al 201-alloy and 2014-SiC composites, Journal of Materials Science Letters, Vol. 22 (2003) pp. 391-394.
56. B.K. Prasad, O.P. Modi, S. Das, A.K. Jha, R. Dasgupta and A.H. Yegneswaran Zinc-Based Alloys: A Potential Engineering Material System, Indian Foundry Journal, Vol. 19 (2003), pp. 19-23.
2004-05
57. S. Das, D.P. Mondal & S. Sawla Solid Particle Erosion of Al-Alloy and Al-Alloy Composites: Effect of Heat Treatment & Angle of Impingement” by, Metallurgical and Material Transitions A, Vol. 35A, April 2004, pp.1369-79
58. S. Das, Development of Aluminium Alloy Composites for Engineering Applications, Transaction IIM, Vol. 57, No.4, August 2004. 325- 334.
59. S. Sawla and S. Das Combined effect of reinforcement and heat treatment on the two – body abrasive wear of aluminium alloy and aluminium particle composites, , Wear, Vol. 257 No. 5-6, Sept. (2004) 556-561.
60. Y.L. Saraswathi, S. Das and DP Mondal Erosion – Corrosion behavior of SiC particle reinforced Al-Si alloy in NaOH Slurry (Metallurgical & Materials Transactions A, volume 36 A, August (2005) 2259-2262)
61. D.P. Mondal, S. Das, R.N. Rao, M. Singh Effect of SiC addition and running-in-wear on the sliding wears behavior of Al-Zn-Mg Aluminium alloy. (Materials Science and Engineering A 402(2005)307-319)
62. D.P. Mondal, S. Das, V. Rajput Effect of zinc concentration and experimental parameters on high stress abrasive wears behavior of Al-Zn alloys. (Materials Science and Engineering A 406(2005)24-33).
63. D. P. Mondal, S. Das and V. Rajput Synthesis and characterization of Al-Zn Alloys with varying Aluminum and Zinc Concentrations. (Indian Foundry Journal) Vol. 51, No. 10/October, (2005).
2006-08
64. S. Das, Y.L. Saraswathi, D.P. Mondal Erosive-corrosive wear of aluminum alloy composites: Influence of slurry composition and speed. (Wear 261 (2006) 180-190.
65. DP Mondal and S. Das High Stress Abrasive Wear Behaviour of Aluminium Hard Particle composites: Effect of Experimental Parameters, Particle Size and Volume Fraction, (Tribology International) 39 (2006) 470-478.
66. M. Singh, D. P. Mondal and S. Das Abrasive wears response of Aluminum Alloy- Siliminite Particles Reinforced composites under low stress condition, Material Science Engg. A, 419 (2006) 59 68).
67. Y.L. Saraswathi, S. Das, D.P. Mondal Influence of microstructure and experimental parameters on the erosion corrosion behavior of aluminium alloy composites, Materials Science Engineering A, 425 (2006) 244-254.
68. D.P.Mondal, N. Ramakrishanan, S.Das, FEM modeling of the Interface and Its effect on elasto-plastic behaviour of metal matrix composites, Mater. Sci. Engg. A 433(2006), 286-290.
69. D.P. Mondal, N.V. Ganesh, V.S. Muneshwar, S.Das, and N. Ramakrishnan. Effect of SiC Concentration and strain rate on the compressive deformation behaviour of 2014 Al-SiCp composites. Materials Science and Engineering; Volume 433, Issues 1-2, (2006). Pages 18-31.
70. DP Mondal, S. Das, KS Suresh, N Ramakrishnan Compressive deformation behaviour of coarse SiC particle reinforced composite: Effect of age hardening and SiC content, Material Science and Engg. A 460-461 (2007) 550-560
71. S. Sawla, S. Das, D.P. Mondal, N. Ramakrishnan Microstructure and mechanical properties of Al alloy and Al alloy-SiCp composite foam, Transactions of IIM, Vol. 60, No. 5, October (2007), pp.495-504.
72. D.P. Mondal, N. Ramakrishnan, K.S. Suresh and S. Das On the moduli of closed cell Aluminium foam, Scripta Mater, 57 (2007) 929-932
73. V. Rajput, D.P. Mondal , S. Das and N. Ramakrishnan Effect of SiC addition on age-hardening of Aluminium composite and closed cell Aluminium composite foam J. Mater Sci. Engg, 42 (2007) 7408-7414.
74. S. Das, D.P.Mondal, S. Sawla, and N. Ramakrishnan Synergic effect of reinforcement and heat treatment on the two body abrasive wear of an Al-Si alloy under varying loads and abrasive sizes. Wear 264 (2008) 47-59.
75. D.P. Mondal, E.M. Vinod, S. Das & T S V C Rao High stress abrasive wear behaviour of shot peened AA2014 Al-alloy. Indian Journal of Engineering & Materials Sciences, Vol. 15, February 2008, pp. 41-50.2009-10
76. I.B. Singh, D.P. Mondal, M. Singh and S. Das Influence of SiC particles addition on the corrosion behavior of 2014 Al-Cu alloy in 3.5% NaCl solution”, Corrosion Science 51 (2009) 234-241.
77. R.N. Rao, S. Das, D.P. Mondal, G. Dixit Dry sliding wear behavior of cast high strength aluminium alloy (Al-Zn-Mg) and hard particle composite”, , Wear, 267 (2009) 1688-1695
78. D.P. Mondal, M.D. Goel, S. Das Effect of strain rate and relative density on compressive deformation behaviour of closed cell Aluminium-fly ash composite foam”, Materials and design, vol. 30,(4) (2009) pp. 1268-1274.
79. D.P.Mondal, S. Das and Nidhi Jha Dry sliding wear behaviour of aluminum syntactic foam, Materials and Design, vol. 30 (2009) pp. 2563-2568.
80. D.P.Mondal, S. Das, N. Ramakrishnan and K. Udaybhaskar, Casting technique Composites Part A, vol.40 (3) (2009) p. 279-288.
81. D.P.Mondal, MD Goel, S. Das ,Compressive Deformation and Energy absorption behavior of Closed Cell Aluminum-fly ash composite foam”, Mater. Sci. Engg. A vol. 507 (1-2), (2009) p. 102-109
82. Rajesh Kumar Bhushan, Sudhir Kumar, Dr. S. Das Optimization of porosity of 7075 Al alloy 10% SiC composite produced by stir casting process through Taguchi method” Int. J. Materials Engineering Innovation, Vol. 1, No. 1, (2009) 116-129.
83. D. P. Mondal, S. Das, Ansul Bodkul and Nidhi Jha Modelling of Evaporative Cooling of Porous Medium filled with Evaporative liquid, CMC, vol.404 (1), 2010, pp.1-20
84. D.P.Mondal and S. Das Effect of Thickening agent, foaming agent and foaming temperature on the Micro architecture and deformation behaviour of closed cell aluminum foam, Materials Science and Engineering Technology”, vol.41(5), May,2010, pp.276–282
85. R.N. Rao and S. Das Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites” Materials and Design 31(2010) 1200-1207
86. R.N. Rao, S. Das, D.P Mondal and G Dixit Effect of heat treatment on the sliding wear behaviour of aluminium alloy (Al-Zn-Mg) hard particle composite”, Tribology International 43 (2010) pp. 330-339
87. Rajesh Kumar Bhushan, Sudhir Kumar, S. Das Effect of machining parameters on surface roughness and tool wear for 7075 Alloy SiC composites”, International J Advance Manuf. Technology, Vol. 50 (5-8), 2010, pp. 459-469
88. R.N. Rao and S. Das Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite, Materials and design 31(2010) pp. 3227-3233
89. Rajesh Kumar Bhushan, Sudhir Kumar and S. Das Cutting Forces and surface roughness analysis of Aluminium – Silicon alloy–SiC Composite, Int. Jr. Manu. Tech. and Ind. Engg., 1 (1), June 2010, pp-57-66.
90. Sanjay Soni, S.Das, G Dixit Effect of SiC content on mechanical and Tribological properties of Al alloy SiC Composites, , Engineering Today Quarterly Journal, Vol. II (4) (2010) pp. 51-59
91. Nidhi Jha, Anshul Badkul, D.P. Mondal, S. Das, M. Singh Sliding Wear behaviour of aluminium syntactic foam: A comparision with Al-10wt% SiC Composites, , Tribology International, 44 (2010) pp. 220-231
92. R. Dasgupta, S. Das, S. Chaturvedi, A.K. Jha Effect of extrusion on properties of Al-based composite, , Transaction of Nonferrous Metals Society of China, vol. 20, 2010, pp.2229-2233
93. Rajesh Kumar Bhushan, Sudhir Kumar and S. Das Effect of process parameters on Microstructure, Compression Strength and CTE of 7075 Al alloy composite:, Journal of Manufacturing Technology and Industrial Engineering (JMTR) vol. 1, issue 1-2, (2010) pp. 77-92
94. R. N. Rao, S. Das Effect of applied pressure on the tribology behaviour of SiCp reinforced AA2024 alloy, , Journal of Tribology International,44 (2011) pp.454-462
95. R.N. Rao, S. Das Effect of sliding distance on the wear and friction behaviour of as cast and heat treated Al-SiCp composites, Materials and Design, 32(2011) pp. 3051-3058.
96. Nidhi Jha, D. P. Mondal, S. Das, Ansul Badkul, M.S.Yadav Sliding wear behaviour of aluminum syntactic foam: A comparison with Al–10 wt% SiC composites,Tribology InternationalVol 44, 2011, pp. 220-231
97. D.P. Mondal Nidhi Jha, Anshul Badkul, S. Das, M.S. Yadav and PK. Jain , Effect of Calcium Addition on The microstructure and Compressive Deformation Behaviour of 7178 Aluminum AlloyMater. and Design Volume 32, Issue 5, May, 2011, pp. 2803-2812
98. Anshul Badkul, Nidhi Jha, D P Mondal, S Das & M S Yadav, Age hardening behaviour of 2014 Al alloy-SiC composites: Effect of porosity and strontium addition Indian Journal of engineering & Materials Sciences Vol. 18 No 1, Feb 2011, pp 79-85
99. Aruna Patel, S.Das, B.K.Prasad “Compressive deformation of Al (2014) – 10wt%. SiC composites: Effect of strain rates and temperatures”, Material Science. & Eng. A530 (2011) 225-232.
100. DP Mondal, J. Datta Majumdar, Nidhi Jha, Ansul Badkul, S. Das, Aruna Patel, Gaurav Gupta Titanium-cenosphere syntactic foam made through powder metallurgy route”, Material & Design 34 (2012) pp. 82-89.
101. IB Singh, M Singh, S Das and Anil K Gupta, A comparative corrosion studies of LM13 alloy, LM13-10wt% SiCp composite and cast iron in NACL solution, Indian Journal of Chemical Technology, November 2012)Vol.19 pp. 385-391.
102. R.S. Rana, Rajesh Purohit and S. Das Review on the influence of alloying elements on the microstructure and mechanical properties of Aluminium alloys and Aluminium, Inter. Jr. of Scientific & Research Publication (June, 2012) Vol. 2 Issue 6,
103. S. Das and BK Prasad Al and Mg based Lightweight Metallic Materials for Automobile Applications, Invertis Journal of Science and Technology, Vol 5, No. 2 (2012)pp.1-10
104 R.K. Bhushun, S. Kumar and S. Das GA Approach for Optimization of Surface Roughness Parameters in Machining of Al alloy SiC Particle Composites, J Mater. Engg & Perfor.4 November 2011,. Pp. 1-11 (DOI:10.1007/s11665-011-0066-2)
105. D.P. Mondal, Nidhi Jha, Anshul Badkul, S. Das and Raghavendra Khedle High Temperature compressive deformation behaviour of Aluminium syntactic foam, Mater. Sci and Engg A Volume 534, 1 February 2012, (2012)pp. 521-529
106. Rupa Dasgupta, S. Das, A.K. Jha Sliding Wear Behaviour of Al-7075 based Metal Matrix Composites: Effect of Processing Parameters, Key Engineering Materials Vol. 504-506 (2012) pp. 556-560, Trans Tech Publication Switzerland
107. A Rehman, S. Das and G. Dixit Analysis of stir die cast Al - SiC composite brake drums based on coefficient of friction, Tribology International, Vol 51, (July 2012) pp. 36-41
108. RN Rao, S. Das, D.P. Mondal and G. Dixit Mechanism of material removal during tribological behaviour of aluminium matrix (Al-Zn-Mg-Cu) composites Tribology International Volume 53, (April 2012), pp. 179–184.
109. AK Gupta, BK Prasad, RK Pajnoo and S. Das Effect of T6 heat treatment on mechanical, abrasive and erosive – corrosive wear properties of eutectic Al-Si alloy, Trans. Nonferrous Met Soc China, 22 (2012) pp. 1041-1050.
110. R.S. Rana, Rajesh Purohit and S. Das Review of recent studies in Al matrix composites, Inter. Jr. of Scientific & Engg. Res. Vol. 3 Issue 6, (June 2012)
111. Rajesh Kumar Bhushun, Sudhir Kumar, S. Das Fabrication and Characterization of 7075 Al Alloy Reinforced with SiC Particulates, the International Journal of Advanced Manufacturing Technology March 2013, Volume 65, Issue 5, pp 611-624
112. DP Mondal, Nidhi Jha, Bilal Gull, S. Das, Anshul Badkul Microarchitecture and compressive deformation behaviour of Al alloy (LM13) – cenosphere hybrid Al foam prepared using CaCO3 as foaming agent, Mater. Sci & Engg, A 560 (2013) pp. 601-610.
113. R.N. Rao, S. Das, D.P. Mondal, G. Dixit, S.L.Tulasi Devi Dry sliding wear maps for AA7010 (Al-Zn-Mg-Cu) aluminium matrix composite, Tribology International, Volume 60, (April 2013)pp. 77-82.
114. Nidhi Jha, D. P. Mondal, J. D. Majumdar,Ansul Badkul, A, K. Khare, A. K. Jha Highly Porous Open Cell Ti-foam using NaCl as Temporary Space Holder Through Powder Metallurgy Route, Materials and Design 47 (2013) 810–819
115. Rupa Dasgupta, AK Jha, and S. Das Effect of Addition of Fine SiC Particles on the Dry Sliding Wear Behaviour of Extruded 2014 Al-Alloy,”ISRN Tribology, vol. Article ID:648524, (2013), doi:10.5402/2013/648524.
116. Mondal, D P, Jha, Nidh, Badkul, A, Das, S, ; Gul Bilal Effect of Age-hardening on Compressive Deformation Behaviour of Al-Alloy (LM13)-Cenosphere Hybrid foam prepared using CaCO3 as Foaming Agent has been accepted for publication in the Journal of Materials Research.(2013)
117. N. Jha, D.P. Mondal, M.D.Goel, J.D. Majumder, S. Das, O. P. Modi, Titanium cenosphere syntactic foam with coarser cenosphere fabricated by powder metallurgy at lower compaction load, Trans. Nonferrous Met. Soc. China, 24 (2014) 89−99.
118. Aruna Patel, S. Das and BK Prasad Hot Deformation Behaviour of AA2014 - 10wt. % SiC composite, Transactions of the Indian Institute of Metals: Volume 67, Issue 4 (2014), 521-530
119. SonikaSahu, M.D. Goel, D.P. Mondal and S. Das High Temperature Compressive Deformation Behaviour of ZA27-SiC foam, Mater. Sci. & Engg., A 607, (March 2014) 162-172.
120. D.P. Mondal, Mahesh Patel, S. Das, A.K. Jha, Hemant Jain, G. Gupta, S.B. Arya, Titanium foam with coarser cell size and wide range of porosity using different types of evaporative space holders through powder metallurgy route, Materials & Design, Volume 63, (November 2014)89-99.
121. Dipen Kumar Rajak, L.A. Kumaraswamidhas and S. Das,Mechanical Behavior and energy absorption foam filled structures of square section under compression loading, Applied Mechanics and Materials, Trans Tech Publication, Vol. 592-594 (2014) pp – 1109-1113
122. R.N. Rao, S. Das and S.L.T. Devi Seizure pressure and sliding velocity diagrams on tribological behaviour of Al alloy composites in as cast and heat treated conditions, Tribology International, Volume 80, Year (2014) 1-6.
123. Dipen Kumar Rajak, L.A. Kumaraswamidhas and S. Das An energy absorption behavior of foam filled structure, Procedia Materials Science, Elsevier Vol 5 (2014) 164-172 2015-16
124. Dipen Kumar Rajak, L.A. Kumaraswamidhas and S. Das Energy absorption capabilities of Aluminium foam – filled square tube, Advanced Materials Letter, 6(1), (2014) 80-85.
125. DP. Mondal, Mahesh Patel, Hemant Jain, A.K. Jha, S. Das and R.Dasgupta The Effect of the Particle Shape and Strain Rate on Microstructure and Compressive Deformation Response of Pure Ti-Foam made using Acrowax as Space Holder" Mater. Sci. Engg. A, 625, (2015) 331-342.
126. DK Rajak, LA Kumaraswamidhas, S Das Energy absorption capacity of empty and foam filled mild steel tube under low strain rate at room temperature, Advanced Materials Letters 6 (6), (2015) 548-553
127. Amulya Bihari Pattnaik a, Satyabrata Das Bharat Bhushan Jha, Nedumbilly Prasantha Effect of Al–5Ti–1B grain refiner on the microstructure, mechanical properties and acoustic emission characteristics of Al5052 Aluminium alloy, Jr. of Mater. Res. and Tech. 4(2), (2015) 171-179.
128. A.K. Barnwal, D.P. Mondal, H. Jain, S. Das, A.K. Jha, R. Dasgupta and P. Banerjee Al2O3nano-particle reinforced Aluminium matrix composites through stir casting technique, Materials Science, an Indian Journal, Volume 13, Year (2015) 49-63.
129. I.B. Singh, M. Singh and S. Das A comparative corrosion behaviour of Mg, AZ31 and AZ91 alloys in 3.5% NaCl solution, Journal of Magnesium and Alloys, Volume 3, Year (2015) 142-148.
130. Dipen Kumar Rajak, L. A. Kumaraswamidhas, and S. Das Evaluation of Microstructure and Compression Behaviour of Aluminium-Alloy Foams, International Conference on Chemical, Metallurgy and Material Science Engineering (CMMSE-2015) August 10-11, (2015) Pattaya, Thailand, PP 10-14
131. Dipen Kumar Rajak, L. A. Kumaraswamidhas, and S. Das Improved Deformation Behaviour of Groove Square Mild Steel Tube under Compressive Loading, International Conference on Chemical, Metallurgy and Material Science Engineering (CMMSE-2015) August 10-11, (2015) Pattaya, Thailand, PP23-
132. Dipen Kumar Rajak, L. A. Kumaraswamidhas, and S. Das Investigation and characterization of aluminium allou foams with TiH2 as a foaming agent, Materials Science and Technology, DOI10.1080/02670836.2015.1123846.
133. Dipen Kumar Rajak, L.A. Kumaraswamidhas, S. Das, S. Senthil Kumaran, Characterization and analysis of compression load behaviour of aluminium alloy foam under the diverse strain rate, Journal of Alloys and Compounds, 656 (2016) 218-225.
134. Sarika Verma, S. S. Amritphale, Satyabrata Das, Synchronizing effect of microwave and Cytosine for the synthesis of hybrid homogenized nano sized cerium oxide and cerium Oxy-carbonate hydrate material, Journal of chemical Research, (2016) 40(6).
135. Sarika Verma, Sudhir Sitaram Amritphale, Satyabrata Das Synthesis and characterization of Advanced Red Mud and MWCNTs Based EMI Shielding Material via Ceramic processing Materials Sciences and Applications, (2016) 7, 192-201, Published Online April 2016 in Sci.
136. Dipen Kumar Rajak, L A Kumaraswamidhas, S Das Experimental analysis to improve Energy absorption properties of rectangular metal section subjected to axial loading, Materials Today: Proceedings 3 (2016) 2207–2212.
137. L A Kumaraswamidhas, Dipen Kumar Rajak, S Das, An investigation on axial deformation behaviour of thin-wall unfilled and filled tube with Aluminium alloy (Al-Si7-Mg) foam-reinforced with SiC particles, J Mater. Engg and Performance (DOI: 10.1007/s11665-016-2175-4) June 2016.
138. Dipen Kumar Rajak, L.A. Kumaraswamidhas, S. Das Technical overview of Aluminium alloy foam, Reviews on Advanced Materials Science (Accepted September 2016)
139. Sarika Verma, S.S. Amritphale,Satyabrata Das Development of advanced, X- ray radiation shielding panels by utilizing red mud based polymeric organo shielding gel type material authored by has been accepted for publication in Waste and Biomass Valorization (Springer) WAVE-D-16-00452R1 (September 2016)
140. Shyam Birla, D.P. Mondal, S Das, N. Prasanth, A.K. Jha, Venkat A.N.Ch Compressive Deformation Behaviour of highly porous AA2014-cenosphere closed cell hybrid foam prepared using CaH2 as foaming agent: comparison with aluminium foam and syntactic foam, Accepted in Transaction IIM, Ms No. TIIM-D-1500478 R1 (2016)
141. Sarika Verma, S.S. Amritphale, Mohd Akram Khan, Avneesh Anshul Satyabrata Das Development of Advanced Geopolymerized Brine Sludge Based Composites, J Polym Environ DOI 10.1007/s10924-016-0877-1 Springer. Published online: 28 October 2016
142. Shyam Birla, D.P. Mondal S. Das, Anup Khare, Jai Prakash Singh, Effect of cenosphere particle size and relative density on the compressive deformation behavior of aluminum-cenosphere hybrid foam, Materials & Design, Available online 28 December 2016
143. Shyam Birla, D.P. Mondal S. Das, Deepak Kumar Kashyap, Venkat A.N.Ch Effect of cenosphere content on the compressive deformation behavior of aluminium – cenosphere hybrid foam, Mater. Sci. Engg A, DOI10.1016/j.msea.2016.12.131.
144. Sarika Verma, S.S. Amritphale, Satyabrata Das "Development of functionalized Nano precursor gel useful for making flexible and moldable radiation shielding material", Journal of Materials Engineering and Performance (ASM) Accepted January 2017.
Google Sites
Report abuse