Embedded Files
Landing Gear
Landing Gear
The Task: The student will design new landing gear for the drone. The design cannot be what the drone had on it the previous year. Any material or software can be used to create the landing gear. Once the gear is designed and made. It must be installed on the drone. Keep in mind that the gear must be tall enough for the dropping mechanism clear the ground while the drone is landed.
Start of Landing Gear
Start of Landing Gear
Base plate made with one extrude and one cut
Test Print for Landing Gear
Test Print for Landing Gear
Additional extrusion to make room to create a hole for zip ties to pass through to attach to drone.
Test Print in the PrusaSlicer
Test Print in the PrusaSlicer
The Solidworks in the PrusaSlicer.
Test Print
Test Print
Test Print
Test Print
Landing Gear Leg
Landing Gear Leg
Boss extrusion with fillets.
Landing Gear Foot
Landing Gear Foot
Fillets to get rid of some edges, and Extrusion on the bottom as the foot when landing.
Final Landing Gear
Final Landing Gear
The final landing gear along with addition to the top so it doesn't wiggle
Drone Final Landing Gear
Drone Final Landing Gear
Landing Gear in PrusaSlicer
Landing Gear in PrusaSlicer
Final Print of the Landing Gear
Final Print of the Landing Gear
Landing Gear Attached to the Drone
Landing Gear Attached to the Drone
Page updated
Google Sites
Report abuse