Printing Setup

Machines

Bambu Labs X1C + AMS

Technology: FDM

Highlights:

Multicolor printing
PLA, ABS, PETG, Nylon, and PC compatible
0.6mm, 0.4mm, and 0.2mm nozzles

Build volume: 256mm x 256mm x 256mm (10" x 10" x 10")

Highest resolution comfortable with: 0.04mm with 0.2mm nozzle

Bambu Labs P1S + AMS

Technology: FDM

Highlights:

Multicolor printing
0.6mm, 0.4mm, and 0.2mm nozzles

Build volume: 256mm x 256mm x 256mm (10" x 10" x 10")

Highest resolution comfortable with: 0.04mm with 0.2mm nozzle

Note: Outdated picture

Creality CR-10S Pro

Technology: FDM

Build volume: 300mm x 300mm x 400mm (11.8" x 11.8" x 15.75")

Modifications:

Microswiss all metal hot end
BL Touch
Hero Me Gen 5 hot end chassis
Octoprint server
Mirror build plate with custom holder
Custom Marlin 2.0 firmware
Noctua fan upgrade
Z-sync timing belt
Z-axis bracing

Highest resolution comfortable with: 0.04mm with 0.2mm nozzle

Note: My CR-10S Pro is my workhorse.

Note: Outdated picture

Creality CR-30

Technology: FDM "PrintMill" (CoreXY)

Build volume: 200mm x 170mm x INFINITY (8.7" x 8.7" x ???)

Modifications:

0.8mm plated nozzle
Linear rails
Direct drive extruder
Octoprint server

Note: Testing for continuous printing purposes

Mosaic Palette 2

Technology: FDM Filament Splicer

Compatible with: PLA, PETG, ABS, TPU, PVA

Note: The P2P enables my CR-20S Pro to be able to use multiple materials or colors in a single print. With the latest slicing software you can "paint" onto an object and let the unit print it in. This is an impressive piece of technology however it has been prone to failure and thus adds risk to any print.

Elegoo Saturn

Technology: SLA

Build Volume: 192mm x 120mm x 200mm (7.5" x 4.7" x 7.8")

Highest resolution comfortable with: 0.03mm

Note: My SLA printer is my primary small parts and detail printer. I could get close to similar quality with my CR-10S Pro but the Anycubic makes it much easier to print these fine detail components with less risk of failure and less retooling needed on the CR-10S Pro. We are experimenting with doing full bodies in high impact resins.

OUTDATED PIC - new one coming soon

Anycubic Wash and Cure PLUS

Technology: SLA post processing (impeller mixing and UV)

Page updated

Google Sites

Report abuse