This board project was intended to provide us the chance to familiarize ourselves with the entire board design flow and process. We got a glimpse at the board layout for board 2 from the professor's version of board 2's switching noise measurement. For this task, we were able to produce our own version. The design of two identical hex inverter circuits on this board set it apart from others. We set up one circuit with a continuous return plane, a decoupling capacitor, and the power pin of the IC in the right design manner. On the second circuit, however, we committed every conceivable error. Instead, we just used a trace to route the ground connections. The decoupling capacitor was also far from the IC pin. There was no ground plane supporting the IC and its routing.