Embedded Files
I am a Ph.D. candidate in Division of Advanced materials Engineering at Kongju National University, under the supervision of Prof. Jihoon Kim. I have completed my Bachelor of science from S.V. University in 2011. Later I did my Master of Science in Physics from University of Hyderabad. After completing my M.Sc in 2014, I joined Raman Research Institute, Bengaluru as a visiting student, there I was working on developing analytical and computational models of inspiralling compact binaries.
My current research interest includes the multi-dimensional (2D, 2.5D, 3D, and 4D) printing of multi-functional materials, Rheology of Inks, Flexible and Stretchable Bio-integrated wearable systems, NFC and Wireless Power Transfer, RF Electronics, Soft Robotics, Self-Healing materials, Laser Sintering, Nanomaterial Synthesis, and Computer Aided Designing.
Education
Education
Ph. D. in Material Science
Ph. D. in Material Science
Kongju National University, South Korea; GPA: 4.42/4.5. March 2016-December 2019.
Kongju National University, South Korea; GPA: 4.42/4.5. March 2016-December 2019.
Advisor: Prof. Jihoon Kim;
Advisor: Prof. Jihoon Kim;
Thesis: “Direct Ink Printing of Multi-Functional Materials on Multi-Dimensional Surfaces for Wireless Power Transfer (WPT) Application.”
Thesis: “Direct Ink Printing of Multi-Functional Materials on Multi-Dimensional Surfaces for Wireless Power Transfer (WPT) Application.”
Master’s in Physics
Master’s in Physics
University of Hyderabad, India; GPA: 7.0/10. August 2012 – June 2014.
University of Hyderabad, India; GPA: 7.0/10. August 2012 – June 2014.
Advisor: Prof: Soma Sanyal;
Advisor: Prof: Soma Sanyal;
Thesis: “Particle Orbits in Curved Spacetime.”
Thesis: “Particle Orbits in Curved Spacetime.”
Bachelor’s in Science
Bachelor’s in Science
Sri Venkateshwara University, India; GPA: 7.0/10. June 2008 – April 2011.
Sri Venkateshwara University, India; GPA: 7.0/10. June 2008 – April 2011.
Technical Skills/Hands-on Experience
Technical Skills/Hands-on Experience
1) Multi-Dimensional printing techniques (2D, 2.5D, and 3D): InkJet Printing, AeroJet Printing, EHD Printing, and Extrusion-based screw dispenser 3D printing.
1) Multi-Dimensional printing techniques (2D, 2.5D, and 3D): InkJet Printing, AeroJet Printing, EHD Printing, and Extrusion-based screw dispenser 3D printing.
2) Design and testing of high-performance printed multi-dimensional WPT modules: integrating inorganic ceramic materials into flexible and 3D electronics.
2) Design and testing of high-performance printed multi-dimensional WPT modules: integrating inorganic ceramic materials into flexible and 3D electronics.
3) Laser sintering of printed ceramic materials.
3) Laser sintering of printed ceramic materials.
4) Rheological measurement and analysis of Newtonian and non-Newtonian inks.
4) Rheological measurement and analysis of Newtonian and non-Newtonian inks.
5) Nanomaterial synthesis, Thin film deposition: Thermal evaporation, Spin Coating.
5) Nanomaterial synthesis, Thin film deposition: Thermal evaporation, Spin Coating.
6) Material characterization and analytical skills: Rheometer, Contact angle measurement, Surface profilometer, Vibrating sample magnetometer (VSM), Inductance/Capacitance/Resistance (LCR) meter, X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), Optical microscopy, UV/Visible/NIR spectrophotometer.
6) Material characterization and analytical skills: Rheometer, Contact angle measurement, Surface profilometer, Vibrating sample magnetometer (VSM), Inductance/Capacitance/Resistance (LCR) meter, X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), Optical microscopy, UV/Visible/NIR spectrophotometer.
7) Excellent data interpretation, writing, and communication skills.
7) Excellent data interpretation, writing, and communication skills.
Programs/Software Skills
Programs/Software Skills
Simulation/ Languages : COMSOL (Basic), LabVIEW (Basic), MATLAB, Mathematica, C++.
Simulation/ Languages : COMSOL (Basic), LabVIEW (Basic), MATLAB, Mathematica, C++.
Software : 3Ds Max, KeyShot, ImageJ, OriginLab, IrfanView, Microsoft Office, LaTeX.
Software : 3Ds Max, KeyShot, ImageJ, OriginLab, IrfanView, Microsoft Office, LaTeX.
CAD Design : DraftSight, MuCAD, AutoCAD.
CAD Design : DraftSight, MuCAD, AutoCAD.
Work Experience
Work Experience
Visiting Research Student
Visiting Research Student
Raman Research Institute, Bengaluru, India.
Raman Research Institute, Bengaluru, India.
Advisor: Prof. Bala Iyer, June 2014 – April 2015,
Advisor: Prof. Bala Iyer, June 2014 – April 2015,
Research work involve:
Research work involve:
1) Computing the 3rd post-Newtonian a-e relation for inspiralling compact binaries in quasi-elliptical orbits.
1) Computing the 3rd post-Newtonian a-e relation for inspiralling compact binaries in quasi-elliptical orbits.
2) Source modelling of Inspiralling compact binaries using analytical methods.
2) Source modelling of Inspiralling compact binaries using analytical methods.
Page updated
Google Sites
Report abuse