Education

• Ph.D. in Mechanical Engineering from Dr B R Ambedkar National Insitute of Technology, Jalandhar, Punjab (August 2018-present)

• M.Tech. in Design Engineering from Lovely Professional University, Jalandhar, Punjab ( Awarded in July 2017)

• B.Tech. in Mechanical Engineering from Lovely Professional University, Jalandhar, Punjab (Awarded in July 2015)

Outline of Ph.D. work

Supervisor (s): 

• Dr Ashok Kumar Bagha, Assistant Professor, Department of Mechanical Engineering, Dr B R Ambedkar National Insitute of Technology, Jalandhar, Punjab

• Prof. Raman Bedi, Associate Professor, Department of Mechanical Engineering, Dr B R Ambedkar National Insitute of Technology, Jalandhar, Punjab

Thesis Title: Characterization and dynamic analysis of microwave welded metals 

• To develop joints between similar and dissimilar metals using microwave hybrid heating.

• To characterize the microwave-induced joints of metallic materials by various available techniques (structural, chemical, mechanical and vibrational). 

Outline of M. Tech. work

Supervisor (s): 

• Dr Ashok Kumar Bagha, Assistant Professor, Department of Mechanical Engineering, Dr B R Ambedkar National Insitute of Technology, Jalandhar, Punjab

• Thesis Title: Modal analysis of composite structure for different fiber orientations

• Modal analysis of composite panel for different fiber orientation (at 0°, 30°, 45°, 60° and 90°) was studied using ABAQUS software and through experimentation. Different boundary conditions such as clamped-free, free-free, simply supported and clamped-clamped can be introduced in a composite panel. It was observed that mode shapes are dependent on the fiber orientation based on viewing and further comparing the different mode shapes of the composite panel. The optimal location of the sensor can be selected by viewing these mode shapes.