Q.MIND

Our group is very open to sharing infrastructure, including research facilities, equipment, instrumentation, etc.
For inquiries about research services, technical support, and collaborative research, please contact Prof. Yoon directly (hoonhahnyoon@gist.ac.kr)

(1) VIS-NIR Vacuum System (VIS-NIR Tunable Monochromatic Light Source Built-in Vacuum Chamber Probe Station)

VIS-NIR Tunable Monochromatic Light Source (Newport/Oriel #SPTLS260B-XIR): [1] White Light Source with Customer CS260B Monochromator (Newport/Oriel #CS260B-3-MC-D) and Pre-Configured Gratings (250–1,825 nm, 600 lines/mm, 400 nm & 1,000 nm Blaze Wavelength, ±1.0 nm Wavelength Accuracy, ±0.15 nm Wavelength Precision), [2] 250W QTH Lamp Power Supply (Newport/Oriel #OPS-Q250), [3] Motorized Filter Wheel (Newport/Oriel #USFW-100): Filter Diameter: 1 inch (25.4 mm), Maximum Optic Thickness: 0.6 inch (15.24 mm), Number of Filters: 6, Communication Interfaces: USB 2.0, 1.5 Inch Flange Type, [4] Lens Tube for Filter Wheel (Newport/Oriel #LT10-05): Optical Diameter: 25.4 mm, [5] Other Modules: Socket Adaptor & Cables, Fused Silica Lens, Two-Element Plano-Convex Condenser, 1.5 inch Flange Series Size, 260 mm Focal Length, Dual Output & Micrometer Slits, PC Controlled Internal Shutter, Fiber Focusing Lens, and Biconvex Lens

Vacuum Chamber Probe Station (MSTECH #M4VC): [1] Vacuum Chamber: Pressure (<2 mTorr), Temperature (70-523 K), Vacuum Pressure of <2 mTorr, Main Chamber with 215 mm Diameter and 250 mm Height, 110 × 6 mm Quarts Windows, Safety Door Lock, Manual Handle Door, Main Chuck 80 mm Diameter, 2 Jocket, 100/1 Surface Uniformity, Cool-down Tank & Hot SID Hitter, Temperature Range of 77–570 K, 77 K Seed 5 min LN2 with ~1 K Resolution, [2] Vacuum Positioner Body Set: Manipulator LM Lead Guide, Micrometer Knob, X/Y/Z Fine Manual Handle of 1 μm Resolution, 40 mm Travel Length, NW 50 x 120 mm Welded Bellows, NW Multi Port 25 mm x 6 Probe Arms, ISO 63 for Turbo Port, [3] Triaxial Probe Positioner: 6 ea, [4] RTD Temp Sensor & Chuck Surface Holding Type, [5] Hot Chuck Controller, Automatic PID Temperature Control & USB Interface, [6] Microscope System: Zoom: 1–7x / LED Ring Guide & Volume Control White, CCD Camera Precision: 2.1M pixel HDMI, CCD C-mount 1/3", 15" LED Monitor, RG179, Copper Bottom Plate: 35 × 35 × 6.4 mm, Tilt Unit, IV/FET Measurement Program

Electronic Modules & Optical and Optoelectronic Tools: [1] Automatic Voltage Regulator (AVR 2kW), [2] Source Measure Unit #1 (Keithley #2636B): ±200 V, DC: ±1.5 A & 5 µV, Source Resolution: 20 fA & 100 nV, Measure Resolution: 0.1 fA, Maximum per Channel: 30.3 W, [3] Programmable 3-Channel DC Power Supply (Keithley #2230-60-3): CH 1&2 Max. 60 V & 3 A, CH 3 Max. 5 V & 3 A, Resolution: 1 mV & 1 mA, Maximum power: 375 W, [4] Optical Power Meter (Newport/Oriel #2936-R): Benchtop, Dual Channel, Power and Energy, RoHS, Measurement Rate Photodiode: Up to 10 kHz for CW, 250 kHz (10 kHz accessible by user), Photodiode for Average Power, Peak-to-Peak Power, Frequency Measurements, Communication Interfaces: USB and RS-232, [5] Calibrated Si Detector (Newport/Oriel #SP7N6157A, 200–1,100 nm), [6] Calibrated Ge Detector (Newport/Oriel #SP7N6159A, 780–1,800 nm), [7] VIS-NIR Spectrometer (Ocean Optics #QEPRO-XR300): 300–1,100 nm, 300 lines/mm, 300 nm Blaze Wavelength, FWHM 1.62–7.21 nm, [8] NIR Spectrometer (Ibsen Photonics #PEBBL): 150 lines/mm, 1,250 nm Blaze Wavelength, FWHM 9.5–12.9 nm, E-NIR. 950–1,700 nm, Wavelength Accuracy 1 nm, [9] Optical Fiber (Core Diameter: 940 µm, NA: 0.22, Length: 1.5 meters), [10] Rack: 600 × 700 × 1,400 mm with a Total of 27 Units Spaced 45 mm apart, Customizable, Currently Used with 6 Compartments

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Junho Min, (Deputy) Junheon Ha

(2) VIS-NIR Mapping System (VIS-NIR Tunable Monochromatic Light Source Built-in Dark Box Dual-Chuck Probe Station with Spatially-Resolvable Stage)

VIS-NIR Tunable Monochromatic Light Source (Newport/Oriel #SPTLS260B-XIR): [1] White Light Source with Customer CS260B Monochromator (Newport/Oriel #CS260B-3-MC-D) and Pre-Configured Gratings (250–1,825 nm, 600 lines/mm, 400 nm & 1,000 nm Blaze Wavelength, ±1.0 nm Wavelength Accuracy, ±0.15 nm Wavelength Precision), [2] 250W QTH Lamp Power Supply (Newport/Oriel #OPS-Q250), [3] Motorized Filter Wheel (Newport/Oriel #USFW-100): Filter Diameter: 1 inch (25.4 mm), Maximum Optic Thickness: 0.6 inch (15.24 mm), Number of Filters: 6, Communication Interfaces: USB 2.0, 1.5 Inch Flange Type, [4] Lens Tube for Filter Wheel (Newport/Oriel #LT10-05): Optical Diameter: 25.4 mm, [5] Other Modules: Socket Adaptor & Cables, Fused Silica Lens, Two-Element Plano-Convex Condenser, 1.5 inch Flange Series Size, 260 mm Focal Length, Dual Output & Micrometer Slits, PC Controlled Internal Shutter, Fiber Focusing Lens, and Biconvex Lens

Dark Box Dual-Chuck Probe Station (Customized): [1] Dark Box: 2,000 × 1,200 × 1,600 mm, [2] Vacuum Chuck: 65 × 150 × 12 mm, [3] Triaxial Probe Positioner: 6 ea, [4] Damped Optical Post: Gear Rack, Mounting Base, 14 in. Height, 1.5 in. Diameter, [5] Post Clamp: 38.1 mm Diameter Gear Rack Posts, M6 Thread, [6] Vibration Isolator: Mechanical, 9 lbs. (4.1 kg) to 20 lbs. (9.1 kg), [7] Mounting Adaptor: Adjustable, VIB100 Mechanical Vibration Isolators, [8] Optical Breadboard Plate: Solid Aluminum, 450 x 600 mm, 25 mm M6 Grid

Spatially-Resolvable Mapping Stage: [1] Motorized Linear Stage & Stepper Motor (#M6): Max. Travel Distance 100 × 100 mm, Min. Incremental Motion: 1 μm, Max. Speed: 50 mm/s, Bidirectional Repeatability: ±1 μm, [2] Motion Controller & Driver (Newport/Oriel #ESP302): 2-Axis, Ethernet, RS232, [3] VIS Spectroscopic Microscope: Edmund #ReflxTM Objectives, 10X, NA: 0.23

Electronic Modules & Optical and Optoelectronic Tools: [1] Automatic Voltage Regulator (AVR 2kW), [2] Source Measure Unit #1 (Keithley #2636B): ±200 V, DC: ±1.5 A & 5 µV, Source Resolution: 20 fA & 100 nV, Measure Resolution: 0.1 fA, Maximum per Channel: 30.3 W, [3] Programmable 3-Channel DC Power Supply (Keithley #2230-60-3): CH 1&2 Max. 60 V & 3 A, CH 3 Max. 5 V & 3 A, Resolution: 1 mV & 1 mA, Maximum power: 375 W, [4] Oscilloscope (Tektronix #MSO22): Bandwidth: 100 MHz, Maximum Sample Rate: 2.5 GS/s, [5] Optical Power Meter (Newport/Oriel #2936-R): Benchtop, Dual Channel, Power and Energy, RoHS, Measurement Rate Photodiode: Up to 10 kHz for CW, 250 kHz (10 kHz accessible by user), Photodiode for Average Power, Peak-to-Peak Power, Frequency Measurements, Communication Interfaces: USB and RS-232, [6] Calibrated Si Detector (Newport/Oriel #SP7N6157A, 200–1,100 nm), [7] Calibrated Ge Detector (Newport/Oriel #SP7N6159A, 780–1,800 nm), [8] VIS-NIR Spectrometer (Ocean Optics #QEPRO-XR300): 300–1,100 nm, 300 lines/mm, 300 nm Blaze Wavelength, FWHM 1.62–7.21 nm, [9] NIR Spectrometer (Ibsen Photonics #PEBBL): 150 lines/mm, 1,250 nm Blaze Wavelength, FWHM 9.5–12.9 nm, E-NIR. 950–1,700 nm, Wavelength Accuracy 1 nm, [10] Optical Fiber (Core Diameter: 940 µm, NA: 0.22, Length: 1.5 meters), [11] Rack: 600 × 700 × 1,400 mm with a Total of 27 Units Spaced 45 mm apart, Customizable, Currently Used with 6 Compartments

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Hyeon Hak Jung, (Deputy) Junho Min

(3) VIS-NIR POL-CA System (VIS-NIR Tunable Monochromatic Light Source Built-in Dark Box Dual-Chuck Probe Station with Waveplate Polarizer and Coded Aperture)

VIS-NIR Tunable Monochromatic Light Source (Newport/Oriel #SPTLS260B-XIR): [1] White Light Source with Customer CS260B Monochromator (Newport/Oriel #CS260B-3-MC-D) and Pre-Configured Gratings (250–1,825 nm, 600 lines/mm, 400 nm & 1,000 nm Blaze Wavelength, ±1.0 nm Wavelength Accuracy, ±0.15 nm Wavelength Precision), [2] 250W QTH Lamp Power Supply (Newport/Oriel #OPS-Q250), [3] Motorized Filter Wheel (Newport/Oriel #USFW-100): Filter Diameter: 1 inch (25.4 mm), Maximum Optic Thickness: 0.6 inch (15.24 mm), Number of Filters: 6, Communication Interfaces: USB 2.0, 1.5 Inch Flange Type, [4] Lens Tube for Filter Wheel (Newport/Oriel #LT10-05): Optical Diameter: 25.4 mm, [5] Other Modules: Socket Adaptor & Cables, Fused Silica Lens, Two-Element Plano-Convex Condenser, 1.5 inch Flange Series Size, 260 mm Focal Length, Dual Output & Micrometer Slits, PC Controlled Internal Shutter, Fiber Focusing Lens, and Biconvex Lens

Dark Box Dual-Chuck Probe Station (Customized): [1] Dark Box: 2,000 × 1,200 × 1,600 mm, [2] Vacuum Chuck: 65 × 150 × 12 mm, [3] Triaxial Probe Positioner: 6 ea, [4] Damped Optical Post: Gear Rack, Mounting Base, 14 in. Height, 1.5 in. Diameter, [5] Post Clamp: 38.1 mm Diameter Gear Rack Posts, M6 Thread, [6] Vibration Isolator: Mechanical, 9 lbs. (4.1 kg) to 20 lbs. (9.1 kg), [7] Mounting Adaptor: Adjustable, VIB100 Mechanical Vibration Isolators, [8] Optical Breadboard Plate: Solid Aluminum, 450 x 600 mm, 25 mm M6 Grid

POL-CA Motion Stage: [1] Manual Linear Stage (Newport/Oriel #M-426): Crossed-Roller Bearings, 25.4 mm Travel, M6), [2] Mounting Breadboard: X-stage, Travel: 240 mm, Pitch: 4 mm & Top Plate: 150x200x10 mm, Size: 350x200x79 mm

Tunable Waveplate Polarizer: [1] VIS Linear Polarizer (Newport #05LP-VIS-B): Polymer Film, 700:1, 430–670 nm, 12.7 mm, [2] NIR Linear Polarizer (Newport #05LP-NIR): Polymer Film, 1000:1, 1100–1750 nm, 12.7 mm, [3] VIS Zero-Order Waveplate (Newport #05RP04-24): Quarter-Wave, Quartz, 12.7 mm Diameter, 632.8 nm, [4] NIR Zero-Order Waveplate (Newport #05RP04-40): Quarter-Wave, Quartz, 12.7 mm Diameter, 1550 nm, [5] Adapter (Oriel #LT10-UADPT): 1.5-Inch Series Flange to Newport 1 inch LT Series), [6] Focusing Lens Tube (Newport #LT10-F): 1 inch Diameter Lenses, [7] Plano-Convex Lens (Newport #SPX016): Fused Silica, 25.4 mm, 50.2 mm EFL, Uncoated, [8] Lens Tube Coupler (Newport #LT10-LX): 1.0 inch Lens Tubes, 1.035–40 External Thread, [9] Focusing Assembly (Newport #77776): Fiber Bundle, FS Aspheric, F/2.2, 800 µm Spot, [10] Ferrule Converter (Newport #77670): SMA Termination to 11mm Standard Ferrule, [11] Air Mass Filter (Newport #81094): AM 1.5 Global, Glass Only, [12] Multiple Filter Holder (Newport #62020): 2.0 in. Filters, 1.5 inch Series Flange, [13] Post Clamp (Newport #370-RC): 1.5 inch Diameter Gear Rack Posts, 1/4-20 Thread, [14] Optical Rod (Newport #72) Height: 610 mm, [15] Rod Clamp (Newport #M-370-RC), [16] Collimation Lens: 38.1 mm Diameter with Manual Iris & Lens Mount

Coded Aperture (HOLOEYE #LC-2012): Spatial Light Modulator, Transmissive LC Display Type, 1024 x 768 Pixel, 36 µm Pixel Pitch, 58 % Fill Factor, 36.9 x 27.6 mm (1.8” Diagonal) Active Area, 8 Bit (256 Grey Levels) Addressing, HDMI – XGA Resolution Signal Formats, 60 Hz Input Frame Rate, Automatically Aperture Controller & Software

Electronic Modules & Optical and Optoelectronic Tools: [1] Automatic Voltage Regulator (AVR 2kW), [2] Source Measure Unit #1 (Keithley #2636B): ±200 V, DC: ±1.5 A & 5 µV, Source Resolution: 20 fA & 100 nV, Measure Resolution: 0.1 fA, Maximum per Channel: 30.3 W, [3] Programmable 3-Channel DC Power Supply (Keithley #2230-60-3): CH 1&2 Max. 60 V & 3 A, CH 3 Max. 5 V & 3 A, Resolution: 1 mV & 1 mA, Maximum power: 375 W, [4] Oscilloscope (Tektronix #MSO22): Bandwidth: 100 MHz, Maximum Sample Rate: 2.5 GS/s, [5] Optical Power Meter (Newport/Oriel #2936-R): Benchtop, Dual Channel, Power and Energy, RoHS, Measurement Rate Photodiode: Up to 10 kHz for CW, 250 kHz (10 kHz accessible by user), Photodiode for Average Power, Peak-to-Peak Power, Frequency Measurements, Communication Interfaces: USB and RS-232, [6] Calibrated Si Detector (Newport/Oriel #SP7N6157A, 200–1,100 nm), [7] Calibrated Ge Detector (Newport/Oriel #SP7N6159A, 780–1,800 nm), [8] VIS-NIR Spectrometer (Ocean Optics #QEPRO-XR300): 300–1,100 nm, 300 lines/mm, 300 nm Blaze Wavelength, FWHM 1.62–7.21 nm, [9] NIR Spectrometer (Ibsen Photonics #PEBBL): 150 lines/mm, 1,250 nm Blaze Wavelength, FWHM 9.5–12.9 nm, E-NIR. 950–1,700 nm, Wavelength Accuracy 1 nm, [10] Optical Fiber (Core Diameter: 940 µm, NA: 0.22, Length: 1.5 meters), [11] Rack: 600 × 700 × 1,400 mm with a Total of 27 Units Spaced 45 mm apart, Customizable, Currently Used with 6 Compartments

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Junho Min, (Deputy) Jihun Park

(4) VIS-NIR Array System (VIS-NIR Tunable Monochromatic Light Source Built-in Dark Box Dual-Chuck Probe Station with Crossbar-Type Array Test Jig)

VIS-NIR Tunable Monochromatic Light Source (Newport/Oriel #SPTLS260B-XIR): [1] White Light Source with Customer CS260B Monochromator (Newport/Oriel #CS260B-3-MC-D) and Pre-Configured Gratings (250–1,825 nm, 600 lines/mm, 400 nm & 1,000 nm Blaze Wavelength, ±1.0 nm Wavelength Accuracy, ±0.15 nm Wavelength Precision), [2] 250W QTH Lamp Power Supply (Newport/Oriel #OPS-Q250), [3] Motorized Filter Wheel (Newport/Oriel #USFW-100): Filter Diameter: 1 inch (25.4 mm), Maximum Optic Thickness: 0.6 inch (15.24 mm), Number of Filters: 6, Communication Interfaces: USB 2.0, 1.5 Inch Flange Type, [4] Lens Tube for Filter Wheel (Newport/Oriel #LT10-05): Optical Diameter: 25.4 mm, [5] Other Modules: Socket Adaptor & Cables, Fused Silica Lens, Two-Element Plano-Convex Condenser, 1.5 inch Flange Series Size, 260 mm Focal Length, Dual Output & Micrometer Slits, PC Controlled Internal Shutter, Fiber Focusing Lens, and Biconvex Lens

Dark Box Dual-Chuck Probe Station (Customized): [1] Dark Box: 2,000 × 1,200 × 1,600 mm, [2] Vacuum Chuck: 65 × 150 × 12 mm, [3] Triaxial Probe Positioner: 6 ea, [4] Damped Optical Post: Gear Rack, Mounting Base, 14 in. Height, 1.5 in. Diameter, [5] Post Clamp: 38.1 mm Diameter Gear Rack Posts, M6 Thread, [6] Vibration Isolator: Mechanical, 9 lbs. (4.1 kg) to 20 lbs. (9.1 kg), [7] Mounting Adaptor: Adjustable, VIB100 Mechanical Vibration Isolators, [8] Optical Breadboard Plate: Solid Aluminum, 450 x 600 mm, 25 mm M6 Grid

Crossbar-Type Active and Passive Array Test Jig (Customized): [1] Low Leakage Switching Matrix Mainframe (Keithley #707A): 432 × 574 × 356 mm, 6 Slots Capacity, Controls up to 576 Matrix Cross-Points of 2-Pole Switching (Expandable to 2,880 Cross-Points with Slave Units), Memory: Stores up to 100 Switch Configurations, Programmable Settling Delay from 0 to 65 seconds in 1 ms Increments, 8 Digital I/O, [2] Matrix Card (Keithley #7174A): 8 Rows by 12 Columns Configuration, 2-Pole Switching, 3-Lug Triaxial Connections, Current: Max. 2 A (200 V), Maximum Offset Current: 100 fA (Typically below 10 fA), Signal-to-Signal Isolation: 2 × 1014 Ω, Fast Relay Settling Time under 1 ms, Settling: Reaches 400 fA Level under 2.5 seconds after 10 V Step, Bandwidth: Up to 30 MHz at 50 Ω, [3] Customized Probe Card: 72-Line Array Addressing (36 Row Lines and 36 Column Lines) for Sequential Addressing of a 36 × 36 Logical Array with 1,296 Pixels, MMCX Connector Type, [4] Customized Probe Card Jig with Optical Microscope: 245 × 310 × 501 mm, Manual X/Y Alignment, Manual Z-axis Contact Approach, Zoom: 0.7–4.5x, Total Magnification: Up to 120x, CCD Camera, Monitor Included, Sliding, 360° Rotating Rack, [5] Cables & Adaptors: 72 Ports Low Noise Triaxial Connector (Triaxial to BNC) & 72 Ports Low Noise BNC Cable (MMCX to BNC), [6] Anti-Vibration Table: 530 × 630 × 100 mm, 3 Auto Level Control, ±0.1 mm Flatness, Pneumatic Support, Combined Quad-Turned Plus Broadband Damping

Electronic Modules & Optical and Optoelectronic Tools: [1] Source Measure Unit #1 (Keithley #2636B): ±200 V, DC: ±1.5 A & 5 µV, Source Resolution: 20 fA & 100 nV, Measure Resolution: 0.1 fA, Maximum per Channel: 30.3 W, [2] Optical Power Meter (Newport/Oriel #2936-R): Benchtop, Dual Channel, Power and Energy, RoHS, Measurement Rate Photodiode: Up to 10 kHz for CW, 250 kHz (10 kHz accessible by user), Photodiode for Average Power, Peak-to-Peak Power, Frequency Measurements, Communication Interfaces: USB and RS-232, [3] Calibrated Si Detector (Newport/Oriel #SP7N6157A, 200–1,100 nm), [4] Calibrated Ge Detector (Newport/Oriel #SP7N6159A, 780–1,800 nm), [5] VIS-NIR Spectrometer (Ocean Optics #QEPRO-XR300): 300–1,100 nm, 300 lines/mm, 300 nm Blaze Wavelength, FWHM 1.62–7.21 nm, [6] NIR Spectrometer (Ibsen Photonics #PEBBL): 150 lines/mm, 1,250 nm Blaze Wavelength, FWHM 9.5–12.9 nm, E-NIR. 950–1,700 nm, Wavelength Accuracy 1 nm, [7] Optical Fiber (Core Diameter: 940 µm, NA: 0.22, Length: 1.5 meters), [8] Rack: 600 × 700 × 1,400 mm with a Total of 27 Units Spaced 45 mm apart, Customizable, Currently Used with 6 Compartments

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Jihun Park, (Deputy) Changhyun Park

(5) Broadband IR System (Broadband IR Tunable Monochromatic Light Source & Dark Box Dual-Chuck Probe Station & Radiometry System & Gas Chamber)

Broadband IR Tunable Monochromatic Light Source (Newport/Oriel #SMID-SPTLS260B): [1] Lamp Type & Watt: IR Emitter & 22 W, Nominal Radiating Area: 3×10 mm, Color Temperature: 1,600–2,000 K, [2] Customer CS260B Monochromator (Newport/Oriel #71SI000804) and Gratings (Newport/Oriel #74080B: 2,500–12,000 nm, 150 lines/mm, 4,000 nm Blaze Wavelength & Newport/Oriel #74082B,: 4,500–20,000 nm, 75 lines/mm, 7,000 nm Blaze Wavelength), [3] Motorized Filter Wheel (Newport/Oriel #USFW-100): Filter Diameter: 1 inch (25.4 mm), Maximum Optic Thickness: 0.6 inch (15.24 mm), Number of Filters: 6, Communication Interfaces: USB 2.0, 1.5 Inch Flange Type, [4] Motorized Input/Output Slits, [5] Interference & Pass (IP) Filter for Noise Removal

Dark Box Dual-Chuck Probe Station (Customized): [1] Dark Box: 700 × 800 × 700 mm, [2] Vacuum Chuck: Size 65 × 110 × 12 mm, Wing Size: 120 × 110 mm, Material: Al6061, [3] Triaxial Probe Positioner: 1 ea, [4] BNC Probe Positioner: 2 ea, [5] Manual Linear Stage: Crossed-Roller Bearings, 25.4 mm Travel, M6, [6] Optical Breadboard Plate: Size 450 × 450 × 12 mm, Mounting Hole: M6, Mounting Hole Pattern: 25 mm Grid, Number of Counterbored Holes: Four M6 Located at Corners, Inset 25 mm from Edge, Materials: A:6061 with Black Anodized, [7] Optical Post: 25 mm Diameter, 230 mm Height, [8] Fixed Angle Joining Clamp: 12.7–25.4 mm (0.5–1.0 inch) Diameter, 90° Angle

Radiometry System (Newport/Oriel #LIDA-SRS-KIT-220 V): [1] Lock-In Digital Amplifier (Stanford Research System #SR860): Input Sensitivity: 2 nV – 1 V, Dynamic Reserve: 100 dB, Input Noise: 6 nV/√Hz, [2] Optical Chopper (Newport/Oriel #75160NF): Frequency Range: 1 mHz – 102 kHz, [3] Low Noise Current Preamplifier (Stanford Research System #SR570): Input Sensitivity: 1 pA/V – 1 mA/V, Bandwidth: ~1 MHz, Input Voltage: ±5 V, [4] GPIB/USB Interface

Gas Chamber (Customized): Mass Flow Controller, Gas Types of CO2, N2O, ETC. (To Be Added)

Electronic Modules & Optical and Optoelectronic Tools: [1] Source Measure Unit #2 (Keithley #2636B): ±200 V, DC: ±1.5 A & 5 µV, Source Resolution: 20 fA & 100 nV, Measure Resolution: 0.1 fA, Maximum per Channel: 30.3 W, [2] DC Power Supply (Keithley #2231A-30-3): CH 1&2 Max. 30 V & 3 A, CH 3 Max. 5 V & 3 A, Resolution: 10 mV & 1 mA, [3] Oscilloscope (Tektronix #MSO22): Bandwidth: 100 MHz, Maximum Sample Rate: 2.5 GS/s, [4] Wide Range Thermal Detector Module (Newport/Oriel #ZOL-740-17C): Broadband Pyroelectric Detector with 1–14.5 μm NIST-Traceable Calibration, 5 mm Active Area, KRS-5 Infrared Optical Window, Frequency Response: 1 Hz – 2 kHz with 1 × 10^9 V/A Internal Gain, High-Sensitivity Infrared Detection with NEP: 1.5 × 10^-8 W/√Hz, [5] Optical Table: 1,800 × 900 × 800 mm, [6] Rack: 560 × 600 × 1360 mm with a Total of 7 Compartments, each 150 mm Height, and 5 Currently Being Used

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Changhyun Park, (Deputy) Junho Min

(6) DA-AC Dark Box Probe Station

Dark Box Dual-Chuck Probe Station (MSTECH #MST8500CL): [1] Probe Station Main Body Unit: X/Y Stage Travel Length: 100 × 100 mm, Resolution: 10 μm ＆ Z Travel Length: Up & Down 15 mm, Resolution: 5 μm, [2] High Positioner Body Unit: X/Y Stage Travel Length: 10 mm ＆ Z Travel Length: 16 mm, Resolution: 1 μm. [3] Coaxial Probe Positioner: 2 ea & Triaxial Probe Positioner: 3 ea with Coaxial Cables (MSTECH #PH-C14) for DC & Triaxial Cables (MSTECH #PH-C15) for AC, [4] Vacuum Hot Chuck & Controller: 45 x 60 x 15 mm Chuck, Temperature Range: RT~400 K, Resolution: ~1 ℃, PID Control, RTD Sensor, [5] Vacuum Pump (MSTECH #MSA002): 620 mL/sec, [6] CCD Camera: 4 K, 1080 p, 60 FPS, Zoom ~200x

Electronic Modules & Optical and Optoelectronic Tools: [1] Source Measure Unit #2 (Keithley #2636B): ±200 V, DC: ±1.5 A & 5 µV, Source Resolution: 20 fA & 100 nV, Measure Resolution: 0.1 fA, Maximum per Channel: 30.3 W, [2] DC Power Supply (Keithley #2231A-30-3): CH 1&2 Max. 30 V & 3 A, CH 3 Max. 5 V & 3 A, Resolution: 10 mV & 1 mA, [3] LCR Meter (Keysight #E4980A): 20 Hz to 2 MHz, DC: Max. ±40 and 100 mA with ~0.3 mV Resolution, AC Max. 20.0 Vrms with 100 mArms Resolution, [4] Nanovoltmeter (Keithley #2182A): Range: 10 mV to 100 V, Resolution: 1 nV to 10 uV, [5] Oscilloscope (Tektronix #MSO22): Bandwidth: 100 MHz, Maximum Sample Rate: 2.5 GS/s, [6] Vector Network Analyzer (Agilent Technologies #E5071B): Frequency Range: 300 kHz~8.5 GHz, Source Resolution: 1 Hz, [7] Function Generator (RIGOL #DG852 Pro): 2 Channel, Bandwidth: 50 MHz, Sampling rate: 625 MS/s, Output Waveform: Sine, Square, Ramp, Pulse, Noise, Harmonic, [8] RF Amplifier (Mini-Circuits #ZFL-1000LN+): Frequency Range: 0.1 to 1000 MHz, Gain: 20 dB, [9] RF Amplifier (Mini-Circuits #ZX60-V63+): Frequency Range: 0.05 to 6 GHz, Gain: 19 dB, [10] Bias-Tee (Mini-Circuits #ZFBT-4R2GW+): Frequency Range: 0.1 to 4200 MHz, Insertion Loss: 0.6 dB, [11] RF Probe Tip (GGB Industries #40A): GSG Type, Frequency Range: DC to 40 GHz, Insertion Loss: 0.7 dB, [12] Si APD (MenloSystems #APD210): Bandwidth: 5 to 1600 MHz, Integrated TIA, Maximum Conversion Gain: 250 kV/W @ 800 nm, [13] Optical Fibers (Core Diameter: 940 µm, NA: 0.22, Length: 5 meters & Core Diameter: 50 µm, NA: 0.12, Length: 5 meters), [14] Rack: 560 × 600 × 1360 mm with a Total of 7 Compartments, each 150 mm Height, and 5 Currently Being Used

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Wonseok Kim, (Deputy) Gyunghyun Jang

(7) Tunable Laser System (Tunable Telecom Laser & Laser Diode Set)

Tunable Semiconductor Telecom Laser (Santex #TSL-210): Wavelength Range: 1530-1610 nm (Tuning Range: 80 nm), Wavelength Resolution: 0.01 nm, Maximum Output Power: 8 mW, Modulation Frequency: ~10 kHz, Max Power: 8 mW, Dimensions: 210 x 110 x 370 mm, External Cavity Tunable Semiconductor Laser (ECL) Type

Laser Diode Set (OZ Optics #OZ-2000 Series): Range: 405-1,550 nm, Stability: ±0.2 nm, Max Power: 5-10 mW, Dimensions: 114 X 80 X 61 mm, Laser Type: Fiber-Coupled, Thermally Stabilized Laser Diode, Wavelength Options: 405, 532, 635, 780, 830, 1060, 1550 nm, Wavelength Stability: ±0.2 nm, Maximum Output Power: 5~10 mW, Modulation Frequency: 20 kHz ~ 1 MHz, OZ-X000 Controller with 5 V Power Supply

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Harry John Braganza, (Deputy) Hyeon Hak Jung

(8) Cryomagnetic System (Cryofree Integrated Superconducting Magnet System for 1.5 K Magnetotransport Measurements)

Cryomagnet (Oxford Instruments #TeslatronPT-12T): Variable Temperature Insert (VTI) of ~1.5–300 K with a Nominal 50 mm Sample Space Diameter, with Static Exchange-Gas Cooling and Sealed Circulation Loop (the Circulation Loop is Fully Separated from the Sample Exchange-Gas Space for Blockage-Free Operation), Magnetic Field Range up to 12 T, Dimensions: 550 × 670 × 1,880 mm, Weight: 220 kg, ATM to 10^-5 Torr, Superconducting Magnet Wire (High-Grade, Low-Hysteresis-Loss Nb3Sn Superconducting Wire, Designed to Minimize Remanent Field and Low-Field Flux Jumping), Temperature Stability: ±50 mK, Typical Sample Cooldown: <2 h from Room Temperature to <2 K for a Basic Probe Loaded into a Cold VTI.

Outer Vacuum Chamber (OVC) Pumping System: [1] Dual-Stage Oil-Sealed Rotary Vane Vacuum Pump (Woosung Vacuum Co., Ltd. #MVP12): Pumping Speed: 12 m^3/h (200 L/min) at 60Hz, Ultimate Pressure: 5×10^-4 Torr (Gas Ballast Closed), Inlet / Outlet Connection: NW 25 (DN 25KF), Motor Power: 0.4 kW (0.54 HP), Oil Capacity: 1.2 Liters, Weight: 22.5 kg, Anti-Suckback Valve, Forced Oil Circulation, [2] Bench Turbo Pumping Station (Agilent Technologies #G8700A-TPS) with Vacuum Gauge from ATM to 10^-8 Torr, [3] Turbomolecular Pump (Pfeiffer Vacuum #HiPace-80): Pumping Speed (N2): 67 L/sec, Ultimate Pressure: <10^-7 mbar (approx. 7.5×10^-8 Torr), Inlet Flange: DN 63 ISO-K with Diameter Nominal: 63 mm, Forevacuum/Outlet Connection: DN 16 ISO-KF, [4] Oil-Free Dry Scroll Pump (Agilent Technologies #IDP-3) 3.6 m^3/hr (60 L/min, 2.1 CFM) at 60 Hz, Ultimate/Base Pressure: ~0.25 Torr (0.33 mbar), Inlet: NW16, Pump Weight: ~9.5 kg (21 lb), [5] Helium Compressor (Sumitomo Heavy Industries & Cryogenics #F-70LP): 5N High Purity Helium Compressor for Cool Down, Cooling Method: Water-Cooled, Electrical Supply: Low Voltage (3-Phase) 200 V, 50/60 Hz, Power Consumption: 7.5~9.8 kW at 60Hz, Dimensions: 532 × 443 × 493 mm, Weight: 100 kg (220 lbs.), Cooling Water Flow: 6 ~ 9 L/min (Inlet Temp: 5 ~ 25 °C), Ambient Operating Temperature: 4–40 °C, Maintenance Interval: 30,000 Hours

Water Cooled Type Water Chiller (Daeho Cooler #DH-5W): Temperature Control Range: 5 to 25 ℃ (±1 ℃), Scroll Type Compressor, Cooling Capacity:14,000 Kcal/h at 20 ℃, Rated Output: 3.75 kW (5 HP), Compressor: DANFOSS MLZ038T2LC9A, Circulation Pump: KMP CMI 3– 4T, Pump Flow Rate: 72 L/min, Pump Head: m, Rated Output: 0.75 kW (1 HP), Water Tank Capacity:110 L, Temperature Control Type: ON/OFF, Temperature Sensor: PT-100Ω, Refrigerant Control Type: T.E.V, Refrigerant: R-407C (3,500g+α), Water Line Material: STS304, Copper, Plate Heat Exchanger Type Condenser, Cooling Water Required Flow Rate: 51 L/min, Flooded Evaporator, Safety Devices (Low Water Level Alarm, High/Low Pressure Alarm, Current Overload Cut-Off, Reverse Phase Prevention, and Freeze Protection), Dimensions: 850 × 665 × 1,280 mm, Weight: 250 kg, Total Power Consumption Normal 4.9 kW/h (Max. 6 kW), Power Voltage: 3PH 220 V 60 Hz

Electronic Modules: [1] Dry-Type Transformer (Hanil Trans #HIDW-15): Dry-Type Double-Wound Isolation Transformer, Capacity: 3-Phase, 15 kVA, Double Wound Type, Primary Voltage: 220V, Secondary Voltage: 220V, Frequency: 60 Hz, Efficiency: 95%, Insulation Class H (Allowable Temp up to 180°C), Insulation Resistance: DC 500V >5MΩ, FAN Cooling Method, Dimensions: 500 × 500 × 700 mm, Weight: 80 kg, [2] Synchronous Source Measure System (LakeShore #M81-SSM): Configurable for 2, 4, or Total 6 Channel Capacities (up to 3 Source and 3 Measure Channels per Unit), 100 μHz to 100 kHz Frequency Range: for AC/Lock-In Functions, 375 kSa/s Total Sample Rate per Measure Channel, >0.0001° RMS Phase Noise with >120 dB Dynamic Reserve for Lock-In Performance, Integrated DC/AC Source Measure Unit Combining Low-Noise Sourcing (<100 fA Current Floor up to 100 mA and Voltage up to 10 V) with Lock-In Detection, Voltage Measure Module up to 10 V Supporting DC, AC, and Differential Inputs with Sub-Nanovolt Sensitivity, [3] Breakout Box (Customized): 24 Port, Al Frame, BNC Input/Output, [4] Switching System (Keithley #DAQ6510 + Tektronix #7700) Standard LAN/LXI USB-TMC Communication Interfaces) 6½-Digit DMM Mainframe, Two Plug-In Module Slots, #7700: 20-Channel Differential Multiplexer, Configured as 20 Channels in 2-Pole Mode or 10 Channels in 4-Pole Mode, for General-Purpose Switching including van der Pauw and Hall-Bar Measurements, [5] Oxford Instruments Basic TeslatronPT Probe: Compatible with #TeslatronPT-12T, Nominal Sample Space Diameter: 50 mm, Probe/Insert Diameter compatible with the 50 mm VTI, Mechanical Interface: NW50, Length: nominal 1.4 m, [6] Cryogenic Sample Holder: Compatible with #TeslatronPT-12T, Gold-Plated Oxygen-Free High-Conductivity (OFHC) Copper Body, Socket Connector and PCB Sample Holder

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Gyunghyun Jang, (Deputy) Jaewon An

(9) Wire Bonder

Manual Wire Bonder (TPT #HB05): Bonding Method: Wedge-Wedge, Ball-Wedge, Ribbon & Bump Bonding, Wire & Ribbon Size: Gold Wire Diameter: 17–75 µm, Aluminum Wire Diameter: 17–75 µm, Ribbon Size: Maximum 25 × 250 µm, Ultrasonic System: 63.3 kHz Transducer PLL Control, Ultrasonic Power: 0–10 W, Bond Time: 0–20,000 ms, Bond Force: 5–200 cN (350 cN Option), Bonding Tool: Diameter: 1.58 mm, Length: 19 mm, Wire Handling System: Manual Wire Spool: 50.8 mm (2"), Wire Termination: Bond Head Tear, Wire Feed Angle: 90°, Clamp Movement: Motorized Up/Down, Electronic Ball Size Control, Bonding Stage & Access: Throat Depth: 165 mm, Fine Table Motion: 15 mm, Mouse Ratio: 6:1, Deep-Access Wedge: 16 mm, Deep-Access Ball: 13 mm, Control Interface: 4.3" TFT Display & Multi Button, 20 Program Storage Capacities, Motorized Tail Control, [8] Temperature Controller: Up to 250°C ±1°C, Electrical Requirements: 100–240 V ±10%, 50/60 Hz, 10 A Maximum, Dimensions: 550 × 450 × 250 mm, Weight: 25 kg, CE Standards

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Gyunghyun Jang, (Deputy) Jaewon An

(10) Transfer Stage in Clean Booth

Transfer Stage (Customized): [1] Precision Manual 100 mm Stage: X/Y Stage: 100 × 100 mm, Travel Length: 12.5 mm, Resolution: 10 μm, Micrometer, [2] Precision Manual 25 mm Stage: X/Y Stage: 25 × 25 mm, Thickness: 28 mm, Stroke: ±3 mm, Travel Length: 12.5 mm, Resolution: 10 μm, Crossed Roller Bearing, [3] Precision Manual Lab Jack: X/Y Stage: 160 × 220 mm, Height: 90–160 mm, Z Travel Length: 70mm, Weight: 3.72 kg, Precision Screw, [4] S/T Support Jack: X/Y Stage: 200 × 200 mm, Height: 70–270 mm, Z Travel Length: 200 mm, Weight: 5 kg, Weight: 80 kg, [5] Medium Positioner Body Unit: X/Y/Z Stage Travel Length: 6 mm, Resolution: 1 μm, Manipulator LM Lead Guide, Fine Knob, [6] Holder: Theta Micro Leveling Control: 15˚, 4 Point Holding Type, [7] Rotary Stage: Stage Diameter: 100 mm, Travel Angle: 360˚±5˚, Thickness: 35 mm, [8] Goniometer: X/Y Stage: 60 × 60 mm, Rotation Center: 60 mm, Travel Angle: 15˚, Thickness: 20 mm, [9] Vacuum Hot Plate: 80 × 90 × 22 mm, Digital Temperature Controller: RT ~300 ℃, Resolution: ~1 ℃, PID Control & RTD Sensor, [10] Vacuum Pump: 620 mL/sec, Anti-Vibration Housing Cover

Optical Metallurgical Microscope (Olympus #BX53MRF): UIS2 Infinity-Corrected Optical System, 10× Wide-Field Eyepiece, Field Number (FN): 22, Objective Lenses: 5x, 10x, 20x, 50x, 100x, Total Magnification: 50x, 100x, 200x, 500x, 1,000x, Observation Mode: Reflected Bright-Field Observation & Dark-Field Differential Interference Contrast, Focusing Mechanism: Coarse and Fine Focusing & 25 mm Focusing Stroke & 100 μm Fine-Focus Movement per Rotation & 1 μm Minimum Graduation, CCD Camera: 4K@1080p@60FPS, CCD C-Mount 1/2", 24" LED Monitor Dual Port

Clean Booth (Customized): Dimensions: 3,800 × 1,400 × 1,900 mm, Cleanliness (ISO 6, Class 1,000)

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Jihun Park, (Deputy) Wonseok Kim

(11) Automated 2D Material Scanning & Transfer System in Clean Booth

Automated 2D Material Scanning & Transfer System (Sejong Scientific Instruments #SLG-STR01): [1] Scanner: Scan Range: 5 × 5 cm, Magnification: 20x, Detection Speed: 1.3 sec/frame, Detectable Materials: Graphene, h-BN, TMDC, MXene, ETC., Detection Resolution: Graphene Monolayer, ETC., Supported Substrates: SiO2, Si, Glass, etc., Position Recording: Automatic Coordinate Recording for Detected Flakes, Detection Method: Optical Contrast-Based Automatic Detection + CNN-Based Classification, Auto-Focusing Support, Drift Compensation for Continuous Large-Area Scanning for over 10 hours, Supports JPG Image Format, [2] Transfer Stage: Precision X/Y/Z Positioning and Rotational Alignment for Deterministic Transfer and Stacking of 2D Materials

Clean Booth (Customized): Dimensions: 3,800 × 1,400 × 1,900 mm, Cleanliness (ISO 6, Class 1,000)

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Jiwon Yoo, (Deputy) Wonseok Kim

(12) Automated 2D Material Scanning & Transfer System in Clean Booth

Transfer Stage (Customized): [1] Base Plate: Dimensions: 350 × 300 mm, Thickness: 12 mm, [2] 3-Axis X/Y/Z Motorized Stage: Dimensions: 80 × 80 mm, Travel Length: 30 mm, [3] Rotation Stage: Dimensions: 80 × 80 mm, [4] Objective Lens: 5x, 20x, 50x, [5] TrueCHROME-M HDMI Digital Camera, [6] 3-Axis Motion Control Box with 3-Axis Joystick, [7] Active Air Vibration Isolator: 500 × 600 × 110 mm, Maximum Load Capacity: 150 kg, Maximum Actuator Force: Vertical: 6 N, Horizontal: 3 N, Active Range: 0.5–100 Hz, [8] Sample Vacuum Plate, [9] Hot Plate (Misung Scientific Instruments, #HP150D): Temperature Range: Max. 380°C, Accuracy: ±1°C, Temperature Controller: Digital PID Auto-Tuning, Timer: 99 hr 59 min, Heater Power: 480 W, Top Plate: Ceramic-Coated Top Plate, Plate Area: 150 × 150 mm, Dimensions: 160 × 280 × 107 mm, Weight: 2.1 kg, Electrical Supply: 220 V, 50/60 Hz or 110 V, 50/60 Hz, [10] Digital Heater Controller (Sun Electronic Co. #SH-203K1): Power Supply: AC 220 V, 50/60 Hz, Max. Contact Rating: 20 A (Recommended Heater Capacity: <3 kW), Control Temperature Range: 0–999 ℃ (K-Type Thermocouple), Resolution: 1 ℃, Operating Ambient Temperature: -20–50 ℃, Measurement Temperature Range: 0–999 ℃, 1°C Resolution, 3 kW (20 A), AC 220 V, 50/60 Hz, [11] Slide Glass Vacuum Plate Assembly

Glove Box (KIYON, #KK-GB(R)-3S-Z & #KK-011AS EXTRA): [1] Support Stand: Dimensions: 1,800 × 900 × 780 mm, Thickness: 4 mm, Stainless Steel, 3 Port Hermetically Sealed Module, [2] Antechamber: Diameter: 390 mm, Length: 600 mm, High Vacuum Design, O-Ring Sealed, Sliding Shelf, [3] Mini Antechamber: Diameter: 150 mm, Length: 290 mm Single Center Knob Type Door, O-Ring Sealed, [4] Automatic Pressure Controller: Pressure Range: -12.5–12.5 mbar, Manual Foot Switch Operates, [5] Purification System (Oxygen/Moisture Removal to less than 1 ppm, Control: PLC type (Heat, Vacuum, Purge, Refill: 13 hours), [6] Moisture Analyzer: 0–1,000 ppm, [7] Oxygen Analyzer: Zirconia Oxygen Concentration Cell, 0.001 ppm – 100 %

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Gyunghyun Jang, (Deputy) Jaewon An

(13) UV Ozone Cleaner (Atmospheric UV/Ozone Surface Cleaning and Treatment System)

Atmospheric UV/Ozone Surface Cleaning and Treatment System (Ossila #L2002A3): UV Light Source: Low-Pressure Mercury Discharge Lamps, Number of Lamps: 4, Quartz Lamp Dimensions: 150 × 15 mm, Discharge Peaks: 185 nm & 254 nm, T80 Lamp Lifetime: 2,000 hr, Sample UV Intensity: 15 mW·cm^-2 at 185 nm, Surface-Cleaning Capability: Atmospheric UV/Ozone Treatment for Removal of Organic Surface Contaminants, Typical Cleaning Rate: 0.1–1.0 Å/s under Ambient Atmospheric-Oxygen Conditions, Depending on Contaminant Type and Process Conditions, Dimensions: 210 × 310 × 228 mm, Weight: 5.45 kg, Sample Tray: 150 mm Diameter, Maximum Sample Height: 12 mm, Compatible Substrates: Quartz, Silicon, Gold, Nickel, Aluminum, Gallium Arsenide, Alumina, and Glass Slides, Timer & User Interface: Programmable Time Adjustment in 1-Second, 10-Second, and 1-Minute Increments, Maximum Run Time: 59 min 59 sec, Electrical Requirements: 110–230 V ±10%, 50/60 Hz, 60 VA, Applications: Improvement of Surface Hydrophilicity, Surface Cleaning, Preparation for Thin-Film Deposition and Surface Treatment, Ultraviolet Curing, Removal of Surface Monolayers, and Surface Oxidation, Typical Removable Contaminants: Photoresist, Resins, Human Skin Oils, Cleaning-Solvent Residues, Plastic-Surface/Silicon-Oil Residues, and Solder Flux

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) (Chief) Jihun Park, (Deputy) Sion Park

(14) MATLAB-Illustrator PC

PC Hardware: Ryzen Threadripper Pro 5955WX, RTX 5050, 256 GB RAM

COMSOL Software: COMSOL Multiphysics 6.4 (Wave Optics Module Add-On), Simulation Dimensions: 2D, 2D Axisymmetric, 3D, Supported Analysis: Frequency Domain, Wavelength Domain, Eigenfrequency, Mode Analysis, Time-Dependent Analysis, Optical Analysis: Electromagnetic Field Distributions, Maxwell’s Equations-Based Electromagnetic Wave Popagation, Optical Coupling, Reflectance, Transmittance, Absorptance, Diffraction, Interference, Scattering, Resonance, ETC., Material Modeling: Refractive Index (n), Extinction Coefficient (k), Complex Permittivity, Dispersive/Anisotropic Optical Properties, Boundary Conditions: Periodic/Floquet/Scattering Boundaries, Ports, Perfectly Matched Layer (PML), ETC. Parametric Analysis: Wavelength, Geometry, Material Parameter Sweeps

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Jiwon Yoo, (Deputy) Jihun Park

(15) MATLAB-Illustrator PC

PC Hardware: i7-14700F, RX 7600, 64 GB RAM

MATLAB Software: Mathworks MATLAB R2024b

Illustrator Software: Adobe Illustrator 30.1

Place: Room 302, GIST College Building C (Building Number: N6)
Contacts: (Chief) Soohyun Min, (Deputy) Dugon Park

(16) Network Attached Storage

Network Attached Storage (Synology #DS923+): 32 TB(8 TB * 4 Bay), RAID 1 Backup Archives, Personal Storages

Place: Available Anywhere on Campus
Contacts: (Chief) Junho Min, (Deputy) Soohyun Min

Our group is very open to sharing infrastructure, including research facilities, equipment, instrumentation, etc.For inquiries about research services, technical support, and collaborative research, please contact Prof. Yoon directly (hoonhahnyoon@gist.ac.kr)

Our group is very open to sharing infrastructure, including research facilities, equipment, instrumentation, etc.
For inquiries about research services, technical support, and collaborative research, please contact Prof. Yoon directly (hoonhahnyoon@gist.ac.kr)